From: Marek Szyprowski <m.szyprowski@samsung.com>
To: linux-riscv@lists.infradead.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Emil Renner Berthing <kernel@esmil.dk>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>
Subject: [PATCH] riscv: defconfig: enable drivers for Starfive VisionFive2 board
Date: Thu, 25 Apr 2024 12:10:03 +0200 [thread overview]
Message-ID: <20240425101003.1149068-1-m.szyprowski@samsung.com> (raw)
In-Reply-To: CGME20240425101017eucas1p10f79f6e47e4c0a8e8083607a075767e0@eucas1p1.samsung.com
Enable all drivers needed for Starfive VisionFive2 board to increase
build and test coverage. Most drivers can be enabled as modules to avoid
bloating the main kernel image.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
arch/riscv/configs/defconfig | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 3cae018f9315..effa22bc2884 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -146,6 +146,8 @@ CONFIG_MICROSEMI_PHY=y
CONFIG_CAN_RCAR_CANFD=m
CONFIG_INPUT_MOUSEDEV=y
CONFIG_KEYBOARD_SUN4I_LRADC=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AXP20X_PEK=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
@@ -157,21 +159,31 @@ CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MV64XXX=m
+CONFIG_I2C=y
CONFIG_I2C_RIIC=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_SPI=y
+CONFIG_SPI_PL022=y
CONFIG_SPI_RSPI=m
CONFIG_SPI_SIFIVE=y
CONFIG_SPI_SUN6I=y
+CONFIG_SPI_SPIDEV=m
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_GPIO_SIFIVE=y
+CONFIG_CHARGER_AXP20X=m
+CONFIG_BATTERY_AXP20X=m
+CONFIG_AXP20X_POWER=m
CONFIG_CPU_THERMAL=y
CONFIG_DEVFREQ_THERMAL=y
CONFIG_RZG2L_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
+CONFIG_MFD_AXP20X_I2C=y
CONFIG_RENESAS_RZG2LWDT=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_GPIO=y
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
@@ -185,7 +197,13 @@ CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_RZ=m
CONFIG_SND_SOC_WM8978=m
+CONFIG_SND_SOC_STARFIVE=m
+CONFIG_SND_SOC_JH7110_PWMDAC=m
+CONFIG_SND_SOC_JH7110_TDM=m
CONFIG_SND_SIMPLE_CARD=m
+CONFIG_SND_AUDIO_GRAPH_CARD=m
+CONFIG_SND_AUDIO_GRAPH_CARD2=m
+CONFIG_I2C_HID=m
CONFIG_USB=y
CONFIG_USB_OTG=y
CONFIG_USB_XHCI_HCD=y
@@ -199,10 +217,16 @@ CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=y
CONFIG_USB_MUSB_HDRC=m
CONFIG_USB_MUSB_SUNXI=m
+CONFIG_USB_CDNS_SUPPORT=m
+CONFIG_USB_CDNS3=m
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_USB_CDNS3_STARFIVE=m
CONFIG_NOP_USB_XCEIV=m
CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_CONFIGFS=m
+CONFIG_USB_CDNS2_UDC=m
+CONFIG_USB_ETH=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
@@ -223,18 +247,24 @@ CONFIG_MMC_DW=y
CONFIG_MMC_DW_STARFIVE=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SUNXI=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_STARFIVE=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_SUN6I=y
CONFIG_DMADEVICES=y
CONFIG_DMA_SUN6I=m
CONFIG_DW_AXI_DMAC=y
CONFIG_RZ_DMAC=y
+CONFIG_DW_AXI_DMAC=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
CONFIG_RENESAS_OSTM=y
CONFIG_SUN8I_DE2_CCU=m
+CONFIG_CLK_STARFIVE_JH7100_AUDIO=y
+CONFIG_CLK_STARFIVE_JH7110_AON=y
+CONFIG_CLK_STARFIVE_JH7110_STG=y
CONFIG_SUN50I_IOMMU=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
@@ -242,9 +272,13 @@ CONFIG_RPMSG_VIRTIO=y
CONFIG_ARCH_R9A07G043=y
CONFIG_IIO=y
CONFIG_RZG2L_ADC=m
+CONFIG_AXP20X_ADC=m
CONFIG_RESET_RZG2L_USBPHY_CTRL=y
CONFIG_PHY_SUN4I_USB=m
CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_STARFIVE_JH7110_DPHY_RX=m
+CONFIG_PHY_STARFIVE_JH7110_PCIE=m
+CONFIG_PHY_STARFIVE_JH7110_USB=m
CONFIG_LIBNVDIMM=y
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_EXT4_FS=y
--
2.34.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
parent reply other threads:[~2024-04-25 10:10 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <CGME20240425101017eucas1p10f79f6e47e4c0a8e8083607a075767e0@eucas1p1.samsung.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240425101003.1149068-1-m.szyprowski@samsung.com \
--to=m.szyprowski@samsung.com \
--cc=aou@eecs.berkeley.edu \
--cc=kernel@esmil.dk \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).