From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: "Jacopo Mondi" <jacopo.mondi@ideasonboard.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
"Tomi Valkeinen" <tomi.valkeinen@ideasonboard.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH v2 10/11] media: max9286: Use the subdev active state
Date: Thu, 9 May 2024 17:19:30 +0200 [thread overview]
Message-ID: <p5u227m3x4kqxdtujtrez6xzdenhblgh223gp2yptfobms2m5i@iuq2a6m7jmou> (raw)
In-Reply-To: <20240509143556.GG17123@pendragon.ideasonboard.com>
Hi Laurent
On Thu, May 09, 2024 at 05:35:56PM GMT, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Mon, May 06, 2024 at 06:49:38PM +0200, Jacopo Mondi wrote:
> > Use the subdev active state in the max9286 driver to store the
> > image format.
> >
> > Replace the .open() function call with the .init_state() one and
> > simplify the set/get_pad_fmt() operations.
> >
> > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> > ---
> > drivers/media/i2c/max9286.c | 130 ++++++++++++------------------------
> > 1 file changed, 44 insertions(+), 86 deletions(-)
> >
> > diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
> > index 5321238cad60..7fad190cd9b3 100644
> > --- a/drivers/media/i2c/max9286.c
> > +++ b/drivers/media/i2c/max9286.c
> > @@ -19,7 +19,6 @@
> > #include <linux/i2c.h>
> > #include <linux/i2c-mux.h>
> > #include <linux/module.h>
> > -#include <linux/mutex.h>
> > #include <linux/of_graph.h>
> > #include <linux/regulator/consumer.h>
> > #include <linux/slab.h>
> > @@ -198,12 +197,8 @@ struct max9286_priv {
> > struct v4l2_ctrl *pixelrate_ctrl;
> > unsigned int pixelrate;
> >
> > - struct v4l2_mbus_framefmt fmt[MAX9286_N_SINKS];
> > struct v4l2_fract interval;
> >
> > - /* Protects controls and fmt structures */
> > - struct mutex mutex;
> > -
> > unsigned int nsources;
> > unsigned int source_mask;
> > unsigned int route_mask;
> > @@ -788,19 +783,22 @@ static void max9286_v4l2_notifier_unregister(struct max9286_priv *priv)
> > static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
> > {
> > struct max9286_priv *priv = sd_to_max9286(sd);
> > + struct v4l2_subdev_state *state;
> > struct max9286_source *source;
> > unsigned int i;
> > bool sync = false;
> > - int ret;
> > + int ret = 0;
> > +
> > + state = v4l2_subdev_lock_and_get_active_state(sd);
> >
> > if (enable) {
> > const struct v4l2_mbus_framefmt *format;
> >
> > /*
> > - * Get the format from the first used sink pad, as all sink
> > - * formats must be identical.
> > + * Get the format from the source pad, as all formats must be
> > + * identical.
> > */
> > - format = &priv->fmt[__ffs(priv->bound_sources)];
> > + format = v4l2_subdev_state_get_format(state, MAX9286_SRC_PAD);
> >
> > max9286_set_video_format(priv, format);
> > max9286_set_fsync_period(priv);
> > @@ -816,12 +814,12 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
> > for_each_source(priv, source) {
> > ret = v4l2_subdev_call(source->sd, video, s_stream, 1);
> > if (ret)
> > - return ret;
> > + goto unlock;
> > }
> >
> > ret = max9286_check_video_links(priv);
> > if (ret)
> > - return ret;
> > + goto unlock;
> >
> > /*
> > * Wait until frame synchronization is locked.
> > @@ -842,7 +840,8 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
> > if (!sync) {
> > dev_err(&priv->client->dev,
> > "Failed to get frame synchronization\n");
> > - return -EXDEV; /* Invalid cross-device link */
> > + ret = -EXDEV; /* Invalid cross-device link */
> > + goto unlock;
> > }
> >
> > /*
> > @@ -865,7 +864,10 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
> > max9286_i2c_mux_close(priv);
> > }
> >
> > - return 0;
> > +unlock:
> > + v4l2_subdev_unlock_state(state);
> > +
> > + return ret;
> > }
> >
> > static int max9286_get_frame_interval(struct v4l2_subdev *sd,
> > @@ -922,31 +924,20 @@ static int max9286_enum_mbus_code(struct v4l2_subdev *sd,
> > return 0;
> > }
> >
> > -static struct v4l2_mbus_framefmt *
> > -max9286_get_pad_format(struct max9286_priv *priv,
> > - struct v4l2_subdev_state *sd_state,
> > - unsigned int pad, u32 which)
> > -{
> > - switch (which) {
> > - case V4L2_SUBDEV_FORMAT_TRY:
> > - return v4l2_subdev_state_get_format(sd_state, pad);
> > - case V4L2_SUBDEV_FORMAT_ACTIVE:
> > - return &priv->fmt[pad];
> > - default:
> > - return NULL;
> > - }
> > -}
> > -
> > static int max9286_set_fmt(struct v4l2_subdev *sd,
> > - struct v4l2_subdev_state *sd_state,
> > + struct v4l2_subdev_state *state,
> > struct v4l2_subdev_format *format)
> > {
> > struct max9286_priv *priv = sd_to_max9286(sd);
> > - struct v4l2_mbus_framefmt *cfg_fmt;
> > + unsigned int pad;
> > unsigned int i;
> >
> > + /*
> > + * Disable setting format on the source pad: format is propagated
> > + * from the sinks.
> > + */
> > if (format->pad == MAX9286_SRC_PAD)
> > - return -EINVAL;
> > + return v4l2_subdev_get_fmt(sd, state, format);
> >
> > /* Validate the format. */
> > for (i = 0; i < ARRAY_SIZE(max9286_formats); ++i) {
> > @@ -957,42 +948,16 @@ static int max9286_set_fmt(struct v4l2_subdev *sd,
> > if (i == ARRAY_SIZE(max9286_formats))
> > format->format.code = max9286_formats[0].code;
> >
> > - cfg_fmt = max9286_get_pad_format(priv, sd_state, format->pad,
> > - format->which);
> > - if (!cfg_fmt)
> > - return -EINVAL;
> > -
> > - mutex_lock(&priv->mutex);
> > - *cfg_fmt = format->format;
> > - mutex_unlock(&priv->mutex);
> > -
> > - return 0;
> > -}
> > -
> > -static int max9286_get_fmt(struct v4l2_subdev *sd,
> > - struct v4l2_subdev_state *sd_state,
> > - struct v4l2_subdev_format *format)
> > -{
> > - struct max9286_priv *priv = sd_to_max9286(sd);
> > - struct v4l2_mbus_framefmt *cfg_fmt;
> > - unsigned int pad = format->pad;
> > + *v4l2_subdev_state_get_format(state, format->pad) = format->format;
> >
> > /*
> > - * Multiplexed Stream Support: Support link validation by returning the
> > - * format of the first bound link. All links must have the same format,
> > - * as we do not support mixing and matching of cameras connected to the
> > - * max9286.
> > + * Apply the same format on the source pad. As all links must have the
> > + * same format we do so only when the first source format is set.
> > */
> > - if (pad == MAX9286_SRC_PAD)
> > - pad = __ffs(priv->bound_sources);
> > -
> > - cfg_fmt = max9286_get_pad_format(priv, sd_state, pad, format->which);
> > - if (!cfg_fmt)
> > - return -EINVAL;
> > -
> > - mutex_lock(&priv->mutex);
> > - format->format = *cfg_fmt;
> > - mutex_unlock(&priv->mutex);
> > + pad = __ffs(priv->bound_sources);
> > + if (pad == format->pad)
> > + *v4l2_subdev_state_get_format(state,
> > + MAX9286_SRC_PAD) = format->format;
>
> In wrote in my review of the previous version:
>
> We don't enforce the requirement that formats on all sink pads must be
> identical. Should we fix that ? One way to do so would be to propagate
> formats to all the other sinks, in addition to propagating it to the
> source.
>
> I haven't seen a reply, maybe you missed the comment.
>
Sorry, missed that.
I can do it.
> >
> > return 0;
> > }
> > @@ -1003,7 +968,7 @@ static const struct v4l2_subdev_video_ops max9286_video_ops = {
> >
> > static const struct v4l2_subdev_pad_ops max9286_pad_ops = {
> > .enum_mbus_code = max9286_enum_mbus_code,
> > - .get_fmt = max9286_get_fmt,
> > + .get_fmt = v4l2_subdev_get_fmt,
> > .set_fmt = max9286_set_fmt,
> > .get_frame_interval = max9286_get_frame_interval,
> > .set_frame_interval = max9286_set_frame_interval,
> > @@ -1025,26 +990,17 @@ static const struct v4l2_mbus_framefmt max9286_default_format = {
> > .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> > };
> >
> > -static void max9286_init_format(struct v4l2_mbus_framefmt *fmt)
> > +static int max9286_init_state(struct v4l2_subdev *sd,
> > + struct v4l2_subdev_state *state)
> > {
> > - *fmt = max9286_default_format;
> > -}
> > -
> > -static int max9286_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
> > -{
> > - struct v4l2_mbus_framefmt *format;
> > - unsigned int i;
> > -
> > - for (i = 0; i < MAX9286_N_SINKS; i++) {
> > - format = v4l2_subdev_state_get_format(fh->state, i);
> > - max9286_init_format(format);
> > - }
> > + for (unsigned int i = 0; i < MAX9286_N_PADS; i++)
> > + *v4l2_subdev_state_get_format(state, i) = max9286_default_format;
> >
> > return 0;
> > }
> >
> > static const struct v4l2_subdev_internal_ops max9286_subdev_internal_ops = {
> > - .open = max9286_open,
> > + .init_state = max9286_init_state,
> > };
> >
> > static const struct media_entity_operations max9286_media_ops = {
> > @@ -1079,10 +1035,6 @@ static int max9286_v4l2_register(struct max9286_priv *priv)
> > }
> >
> > /* Configure V4L2 for the MAX9286 itself */
> > -
> > - for (i = 0; i < MAX9286_N_SINKS; i++)
> > - max9286_init_format(&priv->fmt[i]);
> > -
> > v4l2_i2c_subdev_init(&priv->sd, priv->client, &max9286_subdev_ops);
> > priv->sd.internal_ops = &max9286_subdev_internal_ops;
> > priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> > @@ -1109,14 +1061,21 @@ static int max9286_v4l2_register(struct max9286_priv *priv)
> > if (ret)
> > goto err_async;
> >
> > + priv->sd.state_lock = priv->ctrls.lock;
> > + ret = v4l2_subdev_init_finalize(&priv->sd);
> > + if (ret)
> > + goto err_async;
> > +
> > ret = v4l2_async_register_subdev(&priv->sd);
> > if (ret < 0) {
> > dev_err(dev, "Unable to register subdevice\n");
> > - goto err_async;
> > + goto err_subdev;
> > }
> >
> > return 0;
> >
> > +err_subdev:
> > + v4l2_subdev_cleanup(&priv->sd);
> > err_async:
> > v4l2_ctrl_handler_free(&priv->ctrls);
> > max9286_v4l2_notifier_unregister(priv);
> > @@ -1126,6 +1085,7 @@ static int max9286_v4l2_register(struct max9286_priv *priv)
> >
> > static void max9286_v4l2_unregister(struct max9286_priv *priv)
> > {
> > + v4l2_subdev_cleanup(&priv->sd);
> > v4l2_ctrl_handler_free(&priv->ctrls);
> > v4l2_async_unregister_subdev(&priv->sd);
> > max9286_v4l2_notifier_unregister(priv);
> > @@ -1629,8 +1589,6 @@ static int max9286_probe(struct i2c_client *client)
> > if (!priv)
> > return -ENOMEM;
> >
> > - mutex_init(&priv->mutex);
> > -
> > priv->client = client;
> >
> > /* GPIO values default to high */
>
> --
> Regards,
>
> Laurent Pinchart
next prev parent reply other threads:[~2024-05-09 15:19 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-06 16:49 [PATCH v2 00/11] media: renesas: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 01/11] media: rcar-vin: Fix YUYV8_1X16 handling for CSI-2 Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 02/11] media: rcar-csi2: Disable runtime_pm in probe error Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 03/11] media: rcar-csi2: Cleanup subdevice in remove() Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 04/11] media: rcar-csi2: Use the subdev active state Jacopo Mondi
2024-05-08 16:18 ` Niklas Söderlund
2024-05-09 7:25 ` Jacopo Mondi
2024-05-09 11:06 ` [PATCH v2.1 " Jacopo Mondi
2024-05-09 11:24 ` Niklas Söderlund
2024-05-09 11:32 ` Jacopo Mondi
2024-05-09 12:14 ` [PATCH v2.2 " Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 05/11] media: adv748x-csi2: Implement enum_mbus_codes Jacopo Mondi
2024-05-09 12:42 ` Laurent Pinchart
2024-05-09 13:44 ` Jacopo Mondi
2024-05-09 14:32 ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 06/11] media: adv748x-csi2: Validate the image format Jacopo Mondi
2024-05-09 12:44 ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 07/11] media: adv748x-csi2: Use the subdev active state Jacopo Mondi
2024-05-09 12:45 ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 08/11] media: adv748x-afe: Use 1X16 media bus code Jacopo Mondi
2024-05-09 12:47 ` Laurent Pinchart
2024-05-06 16:49 ` [PATCH v2 09/11] media: max9286: Fix enum_mbus_code Jacopo Mondi
2024-05-06 16:49 ` [PATCH v2 10/11] media: max9286: Use the subdev active state Jacopo Mondi
2024-05-09 14:35 ` Laurent Pinchart
2024-05-09 15:19 ` Jacopo Mondi [this message]
2024-05-06 16:49 ` [PATCH v2 11/11] media: max9286: Use frame interval from subdev state Jacopo Mondi
2024-05-09 12:51 ` Laurent Pinchart
2024-05-09 13:45 ` Jacopo Mondi
2024-05-09 14:11 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=p5u227m3x4kqxdtujtrez6xzdenhblgh223gp2yptfobms2m5i@iuq2a6m7jmou \
--to=jacopo.mondi@ideasonboard.com \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).