From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Sibi Sankar <quic_sibis@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>,
Xilin Wu <wuxilin123@gmail.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Subject: [PATCH v6 0/6] soc: qcom: add in-kernel pd-mapper implementation
Date: Mon, 22 Apr 2024 13:11:15 +0300 [thread overview]
Message-ID: <20240422-qcom-pd-mapper-v6-0-f96957d01207@linaro.org> (raw)
Protection domain mapper is a QMI service providing mapping between
'protection domains' and services supported / allowed in these domains.
For example such mapping is required for loading of the WiFi firmware or
for properly starting up the UCSI / altmode / battery manager support.
The existing userspace implementation has several issue. It doesn't play
well with CONFIG_EXTRA_FIRMWARE, it doesn't reread the JSON files if the
firmware location is changed (or if the firmware was not available at
the time pd-mapper was started but the corresponding directory is
mounted later), etc.
However this configuration is largely static and common between
different platforms. Provide in-kernel service implementing static
per-platform data.
Unlike previous revisions of the patchset, this iteration uses static
configuration per platform, rather than building it dynamically from the
list of DSPs being started.
--
2.39.2
To: Bjorn Andersson <andersson@kernel.org>
To: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Sibi Sankar <quic_sibis@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: Johan Hovold <johan+linaro@kernel.org>
Cc: Xilin Wu <wuxilin123@gmail.com>
Changes in v6:
- Reworked mutex to fix lockdep issue on deregistration
- Fixed dependencies between PD-mapper and remoteproc to fix modular
builds (Krzysztof)
- Added EXPORT_SYMBOL_GPL to fix modular builds (Krzysztof)
- Fixed kerneldocs (Krzysztof)
- Removed extra pr_debug messages (Krzysztof)
- Fixed wcss build (Krzysztof)
- Added platforms which do not require protection domain mapping to
silence the notice on those platforms
- Link to v5: https://lore.kernel.org/r/20240419-qcom-pd-mapper-v5-0-e35b6f847e99@linaro.org
Changes in v5:
- pdr: drop lock in pdr_register_listener, list_lock is already held (Chris Lew)
- pd_mapper: reworked to provide static configuration per platform
(Bjorn)
- Link to v4: https://lore.kernel.org/r/20240311-qcom-pd-mapper-v4-0-24679cca5c24@linaro.org
Changes in v4:
- Fixed missing chunk, reenabled kfree in qmi_del_server (Konrad)
- Added configuration for sm6350 (Thanks to Luca)
- Removed RFC tag (Konrad)
- Link to v3: https://lore.kernel.org/r/20240304-qcom-pd-mapper-v3-0-6858fa1ac1c8@linaro.org
Changes in RFC v3:
- Send start / stop notifications when PD-mapper domain list is changed
- Reworked the way PD-mapper treats protection domains, register all of
them in a single batch
- Added SC7180 domains configuration based on TCL Book 14 GO
- Link to v2: https://lore.kernel.org/r/20240301-qcom-pd-mapper-v2-0-5d12a081d9d1@linaro.org
Changes in RFC v2:
- Swapped num_domains / domains (Konrad)
- Fixed an issue with battery not working on sc8280xp
- Added missing configuration for QCS404
---
Dmitry Baryshkov (6):
soc: qcom: pdr: protect locator_addr with the main mutex
soc: qcom: pdr: fix parsing of domains lists
soc: qcom: pdr: extract PDR message marshalling data
soc: qcom: qmi: add a way to remove running service
soc: qcom: add pd-mapper implementation
remoteproc: qcom: enable in-kernel PD mapper
drivers/remoteproc/Kconfig | 4 +
drivers/remoteproc/qcom_q6v5_adsp.c | 11 +-
drivers/remoteproc/qcom_q6v5_mss.c | 10 +-
drivers/remoteproc/qcom_q6v5_pas.c | 12 +-
drivers/remoteproc/qcom_q6v5_wcss.c | 12 +-
drivers/soc/qcom/Kconfig | 14 +
drivers/soc/qcom/Makefile | 2 +
drivers/soc/qcom/pdr_interface.c | 6 +-
drivers/soc/qcom/pdr_internal.h | 318 ++---------------
drivers/soc/qcom/qcom_pd_mapper.c | 656 ++++++++++++++++++++++++++++++++++++
drivers/soc/qcom/qcom_pdr_msg.c | 349 +++++++++++++++++++
drivers/soc/qcom/qmi_interface.c | 67 ++++
include/linux/soc/qcom/pd_mapper.h | 28 ++
include/linux/soc/qcom/qmi.h | 2 +
14 files changed, 1189 insertions(+), 302 deletions(-)
---
base-commit: a35e92ef04c07bd473404b9b73d489aea19a60a8
change-id: 20240301-qcom-pd-mapper-e12d622d4ad0
Best regards,
--
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
next reply other threads:[~2024-04-22 10:11 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-22 10:11 Dmitry Baryshkov [this message]
2024-04-22 10:11 ` [PATCH v6 1/6] soc: qcom: pdr: protect locator_addr with the main mutex Dmitry Baryshkov
2024-04-22 10:11 ` [PATCH v6 2/6] soc: qcom: pdr: fix parsing of domains lists Dmitry Baryshkov
2024-04-22 10:11 ` [PATCH v6 3/6] soc: qcom: pdr: extract PDR message marshalling data Dmitry Baryshkov
2024-04-22 22:21 ` Steev Klimaszewski
2024-04-23 9:43 ` Dmitry Baryshkov
2024-04-22 10:11 ` [PATCH v6 4/6] soc: qcom: qmi: add a way to remove running service Dmitry Baryshkov
2024-04-22 10:11 ` [PATCH v6 5/6] soc: qcom: add pd-mapper implementation Dmitry Baryshkov
2024-04-22 10:11 ` [PATCH v6 6/6] remoteproc: qcom: enable in-kernel PD mapper Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240422-qcom-pd-mapper-v6-0-f96957d01207@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=johan+linaro@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_sibis@quicinc.com \
--cc=wuxilin123@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).