From: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
To: <agross@kernel.org>, <andersson@kernel.org>,
<konrad.dybcio@linaro.org>, <mathieu.poirier@linaro.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <mturquette@baylibre.com>,
<sboyd@kernel.org>, <quic_eberman@quicinc.com>,
<quic_gurus@quicinc.com>, <bartosz.golaszewski@linaro.org>,
<quic_mmanikan@quicinc.com>, <linux-arm-msm@vger.kernel.org>,
<linux-remoteproc@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>
Cc: <quic_srichara@quicinc.com>, <quic_sjaganat@quicinc.com>,
<quic_kathirav@quicinc.com>, <quic_anusha@quicinc.com>,
<quic_varada@quicinc.com>
Subject: [PATCH v6 11/11] arm64: dts: qcom: ipq9574: Add nodes to bring up multipd
Date: Fri, 10 Nov 2023 14:49:39 +0530 [thread overview]
Message-ID: <20231110091939.3025413-12-quic_mmanikan@quicinc.com> (raw)
In-Reply-To: <20231110091939.3025413-1-quic_mmanikan@quicinc.com>
Enable nodes required for multipd remoteproc bring up.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
---
Changes in v6:
- Rebased on linux-next
Changes in v5:
- Rebased on linux-next
Changes in v4:
- Rebased on linux-next
Changes in v3:
- Fixed all comments and rebased on linux-next.
- Removed WCSS userpd nodes from dtsi file,
because it vary based on no of radio's connected.
Changes in v2:
- Corrected syntax like alignmnet and kept nodes in sorted
order.
- Added 'firmware-name' property.
arch/arm64/boot/dts/qcom/ipq9574.dtsi | 59 +++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 5f83ee42a719..96cc5bb2e0be 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -212,6 +212,11 @@ smem@4aa00000 {
hwlocks = <&tcsr_mutex 3>;
no-map;
};
+
+ q6_region: wcnss@4ab00000 {
+ reg = <0x0 0x4ab00000 0x0 0x2b00000>;
+ no-map;
+ };
};
soc: soc@0 {
@@ -741,6 +746,36 @@ frame@b128000 {
status = "disabled";
};
};
+
+ q6v5_wcss: remoteproc@cd00000 {
+ compatible = "qcom,ipq9574-q6-mpd";
+ reg = <0x0cd00000 0x4040>;
+ firmware-name = "ath11k/IPQ9574/hw1.0/q6_fw.mdt",
+ "ath11k/IPQ9574/hw1.0/m3_fw.mdt";
+ interrupts-extended = <&intc GIC_SPI 325 IRQ_TYPE_EDGE_RISING>,
+ <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+ <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack";
+
+ qcom,smem-states = <&wcss_smp2p_out 0>,
+ <&wcss_smp2p_out 1>;
+ qcom,smem-state-names = "shutdown",
+ "stop";
+ memory-region = <&q6_region>;
+
+ glink-edge {
+ interrupts = <GIC_SPI 321 IRQ_TYPE_EDGE_RISING>;
+ label = "rtr";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 8>;
+ };
+ };
};
thermal-zones {
@@ -998,4 +1033,28 @@ timer {
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ wcss: wcss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 322 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 9>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ wcss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ wcss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
};
--
2.34.1
prev parent reply other threads:[~2023-11-10 19:24 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-10 9:19 [PATCH v6 00/11] Add multipd remoteproc support Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 01/11] dt-bindings: remoteproc: qcom: Add support for multipd model Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 02/11] clk: qcom: ipq5332: remove q6 bring up clocks Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 03/11] clk: qcom: ipq9574: " Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 04/11] dt-bindings: clock: qcom: gcc-ipq5332: remove q6 bring up clock macros Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 05/11] dt-bindings: clock: qcom: gcc-ipq9574: " Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 06/11] firmware: qcom_scm: ipq5332: add support to pass metadata size Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 07/11] firmware: qcom_scm: ipq5332: add msa lock/unlock support Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 08/11] remoteproc: qcom: q6v5: Add multipd interrupts support Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 09/11] remoteproc: qcom: Add Hexagon based multipd rproc driver Manikanta Mylavarapu
2023-11-10 9:19 ` [PATCH v6 10/11] arm64: dts: qcom: ipq5332: Add nodes to bringup multipd Manikanta Mylavarapu
2023-11-10 9:19 ` Manikanta Mylavarapu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231110091939.3025413-12-quic_mmanikan@quicinc.com \
--to=quic_mmanikan@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bartosz.golaszewski@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=mturquette@baylibre.com \
--cc=quic_anusha@quicinc.com \
--cc=quic_eberman@quicinc.com \
--cc=quic_gurus@quicinc.com \
--cc=quic_kathirav@quicinc.com \
--cc=quic_sjaganat@quicinc.com \
--cc=quic_srichara@quicinc.com \
--cc=quic_varada@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).