From: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
To: u.kleine-koenig@pengutronix.de, robh@kernel.org,
krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org,
inochiama@outlook.com, paul.walmsley@sifive.com,
palmer@dabbelt.com, aou@eecs.berkeley.edu,
linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org
Cc: Jingbao Qiu <qiujingbao.dlmu@gmail.com>
Subject: [PATCH v6 0/2] riscv: pwm: sophgo: add pwm support for CV1800
Date: Sat, 6 Apr 2024 14:34:11 +0800 [thread overview]
Message-ID: <20240406063413.3334639-1-qiujingbao.dlmu@gmail.com> (raw)
The Sophgo CV1800 chip provides a set of four independent
PWM channel outputs.
This series adds PWM controller support for Sophgo cv1800.
Changes since v5:
- delete the OE function because we plan to use the counter subsystem
instead of capture, so there is no need to reuse this code.
- fix set polarity reverse error.
v5: https://lore.kernel.org/all/20240314100131.323540-1-qiujingbao.dlmu@gmail.com/
Changes since v4:
- drop filename
- fix macro
- optimize cv1800_pwm_set_polarity()
- optimize cv1800_pwm_set_oe()
- add comment for cv1800_pwm_set_oe()
- use ticks replace tem
- fix duty_cycle larger than period_val
- use devm_clk_rate_exclusive_get() replace
clk_rate_exclusive_get()
- map linux polarity to register polarity
v4: https://lore.kernel.org/all/20240304085933.1246964-1-qiujingbao.dlmu@gmail.com/
datasheet Link: https://github.com/milkv-duo/duo-files/blob/main/duo/datasheet/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf
page 614
Changes since v3:
- use macro instead of npwm number
- add support for polarity feature
- add support for Output-Enable/OE feature
v3: https://lore.kernel.org/all/20240223082014.109385-1-qiujingbao.dlmu@gmail.com/
Changes since v2:
- use 0x08 instead of macro
- split if statements based on conditions
- in order to round up, first calculate the
number of high-level cycles, then subtract
it from the PERIOD to obtain the number of HLPERIOD
- use new pwmchip_alloc() API instead of old style
v2: https://lore.kernel.org/all/20240212121729.1086718-1-qiujingbao.dlmu@gmail.com/
Changes since v1:
- drop full stop from subject
- re-order maintainers and description
- pass checkpatch.pl --strict
- fix naming errors
- add "Limitations" section
- use a driver specific prefix for all defines
- using bool instead u32 in cv1800_pwm_enable
- check and set state->polarity
- use mul_u64_u64_div_u64
- use clk_rate_exclusive_get(), balance with clk_rate_exclusive_put()
- using macro definitions instead of shift operations
- remove shift operation on 0
- use priv replace cv_pwm
- hardcode npwm
- set atomic to true
- remove MODULE_ALIAS
v1: https://lore.kernel.org/all/20240207055856.672184-1-qiujingbao.dlmu@gmail.com/
Jingbao Qiu (2):
dt-bindings: pwm: sophgo: add pwm for Sophgo CV1800 series SoC
pwm: sophgo: add pwm support for Sophgo CV1800 SoC
.../bindings/pwm/sophgo,cv1800-pwm.yaml | 45 +++
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-cv1800.c | 296 ++++++++++++++++++
4 files changed, 352 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/sophgo,cv1800-pwm.yaml
create mode 100644 drivers/pwm/pwm-cv1800.c
--
2.25.1
next reply other threads:[~2024-04-06 6:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-06 6:34 Jingbao Qiu [this message]
2024-04-06 6:34 ` [PATCH v6 1/2] dt-bindings: pwm: sophgo: add pwm for Sophgo CV1800 series SoC Jingbao Qiu
2024-04-06 6:34 ` [PATCH v6 2/2] pwm: sophgo: add pwm support for Sophgo CV1800 SoC Jingbao Qiu
2024-04-29 14:54 ` Uwe Kleine-König
2024-04-30 4:36 ` Jingbao Qiu
2024-04-30 8:06 ` Uwe Kleine-König
2024-04-30 12:47 ` Jingbao Qiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240406063413.3334639-1-qiujingbao.dlmu@gmail.com \
--to=qiujingbao.dlmu@gmail.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=inochiama@outlook.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).