From: Biju Das <biju.das.jz@bp.renesas.com>
To: Philipp Zabel <p.zabel@pengutronix.de>,
Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
"linux-phy@lists.infradead.org" <linux-phy@lists.infradead.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Fabrizio Castro <fabrizio.castro.jz@renesas.com>,
"linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>
Subject: RE: [PATCH RFC 0/3] Support VBUSEN selection control for RZ/G2L
Date: Mon, 15 Apr 2024 12:18:51 +0000 [thread overview]
Message-ID: <OSAPR01MB1587FA6A68811C80A574BCBE86092@OSAPR01MB1587.jpnprd01.prod.outlook.com> (raw)
In-Reply-To: <TYCPR01MB11269EE1F1FF841AFD999C9AE86592@TYCPR01MB11269.jpnprd01.prod.outlook.com>
Hi All,
What about modelling VBUSEN as a regulator?
USB phy ctrl driver shares the resource to VBUSEN regulator driver
for enable/disable VBUS and PHY driver uses regulator to control the
VBUS??
+ DT as it involves different modelling
Cheers,
Biju
> -----Original Message-----
> From: Biju Das
> Sent: Tuesday, February 27, 2024 12:03 PM
> Subject: RE: [PATCH RFC 0/3] Support VBUSEN selection control for RZ/G2L
>
> Hi All,
>
> > -----Original Message-----
> > From: Biju Das <biju.das.jz@bp.renesas.com>
> > Sent: Thursday, May 18, 2023 4:57 PM
> > To: Philipp Zabel <p.zabel@pengutronix.de>
> > Cc: Biju Das <biju.das.jz@bp.renesas.com>; Vinod Koul
> > <vkoul@kernel.org>; Kishon Vijay Abraham I <kishon@kernel.org>;
> > linux-phy@lists.infradead.org; Geert Uytterhoeven
> > <geert+renesas@glider.be>; Fabrizio Castro
> > <fabrizio.castro.jz@renesas.com>; linux-renesas-soc@vger.kernel.org
> > Subject: [PATCH RFC 0/3] Support VBUSEN selection control for RZ/G2L
> >
> > This patch series aims to add support for VBUSEN selection control for
> > RZ/G2L alike SoCs.
> >
> > As per RZ/G2L HW(Rev.1.30 May2023) manual, VBUSEN can be controlled by
> > the Port Power bit of the EHCI/OHCI operational register or by the
> > VBOUT bit of the VBUS Control Register.
> >
> > A reset consumer(phy-rcar-gen3-usb2) needs to find the reset
> > controller device and then call the provider(reset-rzg2l-usbphy-ctrl)
> > to configure it.
> >
> > Please share your thoughts on this patch series.
>
> Gentle ping for this RFC series. Is this series is in the right direction?
>
> Cheers,
> Biju
>
> >
> > Biju Das (3):
> > reset: Add reset_controller_get_dev()
> > reset: renesas: Add rzg2l_usbphy_ctrl_select_vbus_ctrl()
> > phy: renesas: phy-rcar-gen3-usb2: Control VBUSEN selection
> >
> > drivers/phy/renesas/phy-rcar-gen3-usb2.c | 9 ++++++++
> > drivers/reset/core.c | 14 ++++++++++++
> > drivers/reset/reset-rzg2l-usbphy-ctrl.c | 27 ++++++++++++++++++++++++
> > include/linux/reset-controller.h | 9 ++++++++
> > include/linux/reset/rzg2l-usbphy-ctrl.h | 16 ++++++++++++++
> > 5 files changed, 75 insertions(+)
> > create mode 100644 include/linux/reset/rzg2l-usbphy-ctrl.h
> >
> > --
> > 2.25.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
prev parent reply other threads:[~2024-04-15 12:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-18 15:56 [PATCH RFC 0/3] Support VBUSEN selection control for RZ/G2L Biju Das
2023-05-18 15:56 ` [PATCH RFC 3/3] phy: renesas: phy-rcar-gen3-usb2: Control VBUSEN selection Biju Das
2024-02-27 12:02 ` [PATCH RFC 0/3] Support VBUSEN selection control for RZ/G2L Biju Das
2024-04-15 12:18 ` Biju Das [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=OSAPR01MB1587FA6A68811C80A574BCBE86092@OSAPR01MB1587.jpnprd01.prod.outlook.com \
--to=biju.das.jz@bp.renesas.com \
--cc=devicetree@vger.kernel.org \
--cc=fabrizio.castro.jz@renesas.com \
--cc=geert+renesas@glider.be \
--cc=geert@linux-m68k.org \
--cc=kishon@kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).