From: Neil Armstrong <neil.armstrong@linaro.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
linux-kernel@vger.kernel.org,
Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH] phy: qcom: qmp-combo: fix sm8650 voltage swing table
Date: Mon, 26 Feb 2024 16:22:36 +0100 [thread overview]
Message-ID: <20240226-topic-sm8650-upstream-combo-phy-swing-update-v1-1-08707ebca92a@linaro.org> (raw)
The QMP USB3/DP PHY found in the SM8650 SoC requires a slighly
different Voltage Swing table for HBR/RBR link speeds.
Add a new hbr/rbr voltage switch table named "v6" used in a new
sm8650 qmp_phy_cfg struct replacing the sm8550 fallback used for
the sm8650 compatible.
Fixes: 80c1afe8c5fe ("phy: qcom: qmp-combo: add QMP USB3/DP PHY tables for SM8650")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 54 ++++++++++++++++++++++++++++++-
1 file changed, 53 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 546d3c6bee32..66991886da87 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1377,6 +1377,13 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
{ 0x3f, 0xff, 0xff, 0xff }
};
+static const u8 qmp_dp_v6_voltage_swing_hbr_rbr[4][4] = {
+ { 0x27, 0x2f, 0x36, 0x3f },
+ { 0x31, 0x3e, 0x3f, 0xff },
+ { 0x36, 0x3f, 0xff, 0xff },
+ { 0x3f, 0xff, 0xff, 0xff }
+};
+
static const u8 qmp_dp_v6_pre_emphasis_hbr_rbr[4][4] = {
{ 0x20, 0x2d, 0x34, 0x3a },
{ 0x20, 0x2e, 0x35, 0xff },
@@ -1996,6 +2003,51 @@ static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
};
+static const struct qmp_phy_cfg sm8650_usb3dpphy_cfg = {
+ .offsets = &qmp_combo_offsets_v3,
+
+ .serdes_tbl = sm8550_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8550_usb3_serdes_tbl),
+ .tx_tbl = sm8550_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8550_usb3_tx_tbl),
+ .rx_tbl = sm8550_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8550_usb3_rx_tbl),
+ .pcs_tbl = sm8550_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_tbl),
+ .pcs_usb_tbl = sm8550_usb3_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8550_usb3_pcs_usb_tbl),
+
+ .dp_serdes_tbl = qmp_v6_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v6_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v6_dp_tx_tbl),
+
+ .serdes_tbl_rbr = qmp_v6_dp_serdes_tbl_rbr,
+ .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_rbr),
+ .serdes_tbl_hbr = qmp_v6_dp_serdes_tbl_hbr,
+ .serdes_tbl_hbr_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr),
+ .serdes_tbl_hbr2 = qmp_v6_dp_serdes_tbl_hbr2,
+ .serdes_tbl_hbr2_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr2),
+ .serdes_tbl_hbr3 = qmp_v6_dp_serdes_tbl_hbr3,
+ .serdes_tbl_hbr3_num = ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr3),
+
+ .swing_hbr_rbr = &qmp_dp_v6_voltage_swing_hbr_rbr,
+ .pre_emphasis_hbr_rbr = &qmp_dp_v6_pre_emphasis_hbr_rbr,
+ .swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2,
+ .pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
+
+ .dp_aux_init = qmp_v4_dp_aux_init,
+ .configure_dp_tx = qmp_v4_configure_dp_tx,
+ .configure_dp_phy = qmp_v4_configure_dp_phy,
+ .calibrate_dp_phy = qmp_v4_calibrate_dp_phy,
+
+ .regs = qmp_v6_usb3phy_regs_layout,
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+};
+
static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp)
{
const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -3625,7 +3677,7 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
},
{
.compatible = "qcom,sm8650-qmp-usb3-dp-phy",
- .data = &sm8550_usb3dpphy_cfg,
+ .data = &sm8650_usb3dpphy_cfg,
},
{
.compatible = "qcom,x1e80100-qmp-usb3-dp-phy",
---
base-commit: 8552c902efe7ef670b6961fb8885b67961aeb629
change-id: 20240226-topic-sm8650-upstream-combo-phy-swing-update-41ba728470dc
Best regards,
--
Neil Armstrong <neil.armstrong@linaro.org>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next reply other threads:[~2024-02-26 15:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-26 15:22 Neil Armstrong [this message]
2024-04-05 17:09 ` [PATCH] phy: qcom: qmp-combo: fix sm8650 voltage swing table Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240226-topic-sm8650-upstream-combo-phy-swing-update-v1-1-08707ebca92a@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=andersson@kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).