From: Marc Gonzalez <mgonzalez@freebox.fr>
To: Vikash Garodia <quic_vgarodia@quicinc.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: DT <devicetree@vger.kernel.org>,
linux-media <linux-media@vger.kernel.org>,
MSM <linux-arm-msm@vger.kernel.org>,
Stanimir Varbanov <stanimir.k.varbanov@gmail.com>,
Bjorn Andersson <andersson@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Pierre-Hugues Husson <phh@phh.me>
Subject: Re: [RFC WIP PATCH] venus: add qcom,no-low-power property
Date: Tue, 20 Feb 2024 15:45:22 +0100 [thread overview]
Message-ID: <c6a9c20e-02d3-4334-badd-2efe5be9ce7e@freebox.fr> (raw)
In-Reply-To: <a8c5b27c-47a9-044a-78e8-51c67acf19a6@quicinc.com>
On 20/02/2024 14:53, Vikash Garodia wrote:
> On 2/20/2024 6:57 PM, Krzysztof Kozlowski wrote:
>
>> On 20/02/2024 13:34, Marc Gonzalez wrote:
>>
>>> Here's the proposal for v2:
>>>
>>> qcom,venus-broken-low-power-mode
>>>
>>> Description:
>>> This property is defined for devices where playback does not work
>>> when the video decoder is in low power mode.
>>
>> Would be nice to know what's broken but if that's tricky to get, then
>> sounds fine.
>
> msm8998 supports configuring the VCodec (venus core0) GDSC in HW power control
> mode. Could you please check and confirm if the driver is configuring only the
> VCodec GDSC and not the venus GDSC. Look for the attribute
> "qcom,support-hw-trigger" in vendor dt file.
[ Vendor DTS for easy reference: ]
[ https://git.codelinaro.org/clo/la/kernel/msm-4.4/-/blob/caf_migration/kernel.lnx.4.4.r38-rel/arch/arm/boot/dts/qcom/msm8998.dtsi ]
In the queue, we have a patch enabling the Venus Decoder (VDEC) in mainline.
(It is using the previously proposed "qcom,no-low-power" mechanism, but that
might not be necessary, if I understand correctly?)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 2793cc22d381a..5084191be1446 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -3000,6 +3000,56 @@ mdss_dsi1_phy: phy@c996400 {
};
};
+ venus: video-codec@cc00000 {
+ compatible = "qcom,msm8998-venus";
+ reg = <0x0cc00000 0xff000>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc VIDEO_TOP_GDSC>;
+ clocks = <&mmcc VIDEO_CORE_CLK>,
+ <&mmcc VIDEO_AHB_CLK>,
+ <&mmcc VIDEO_AXI_CLK>,
+ <&mmcc VIDEO_MAXI_CLK>;
+ clock-names = "core", "iface", "bus", "mbus";
+ iommus = <&mmss_smmu 0x400>,
+ <&mmss_smmu 0x401>,
+ <&mmss_smmu 0x40a>,
+ <&mmss_smmu 0x407>,
+ <&mmss_smmu 0x40e>,
+ <&mmss_smmu 0x40f>,
+ <&mmss_smmu 0x408>,
+ <&mmss_smmu 0x409>,
+ <&mmss_smmu 0x40b>,
+ <&mmss_smmu 0x40c>,
+ <&mmss_smmu 0x40d>,
+ <&mmss_smmu 0x410>,
+ <&mmss_smmu 0x411>,
+ <&mmss_smmu 0x421>,
+ <&mmss_smmu 0x428>,
+ <&mmss_smmu 0x429>,
+ <&mmss_smmu 0x42b>,
+ <&mmss_smmu 0x42c>,
+ <&mmss_smmu 0x42d>,
+ <&mmss_smmu 0x411>,
+ <&mmss_smmu 0x431>;
+ memory-region = <&venus_mem>;
+ status = "disabled";
+ qcom,no-low-power; /*** WORK AROUND LOW-POWER ISSUE ***/
+
+ video-decoder {
+ compatible = "venus-decoder";
+ clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VIDEO_SUBCORE0_GDSC>;
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VIDEO_SUBCORE1_GDSC>;
+ };
+ };
+
mmss_smmu: iommu@cd00000 {
compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
reg = <0x0cd00000 0x40000>;
diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index a712dd4f02a5b..ad1705e510312 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -585,6 +585,43 @@ static const struct venus_resources msm8996_res = {
.fwname = "qcom/venus-4.2/venus.mbn",
};
+static const struct freq_tbl msm8998_freq_table[] = {
+ { 1944000, 520000000 }, /* 4k UHD @ 60 (decode only) */
+ { 972000, 520000000 }, /* 4k UHD @ 30 */
+ { 489600, 346666667 }, /* 1080p @ 60 */
+ { 244800, 150000000 }, /* 1080p @ 30 */
+ { 108000, 75000000 }, /* 720p @ 30 */
+};
+
+static const struct reg_val msm8998_reg_preset[] = {
+ { 0x80124, 0x00000003 },
+ { 0x80550, 0x01111111 },
+ { 0x80560, 0x01111111 },
+ { 0x80568, 0x01111111 },
+ { 0x80570, 0x01111111 },
+ { 0x80580, 0x01111111 },
+ { 0xe2010, 0x00000000 },
+};
+
+static const struct venus_resources msm8998_res = {
+ .freq_tbl = msm8998_freq_table,
+ .freq_tbl_size = ARRAY_SIZE(msm8998_freq_table),
+ .reg_tbl = msm8998_reg_preset,
+ .reg_tbl_size = ARRAY_SIZE(msm8998_reg_preset),
+ .clks = {"core", "iface", "bus", "mbus"},
+ .clks_num = 4,
+ .vcodec0_clks = { "core" },
+ .vcodec1_clks = { "core" },
+ .vcodec_clks_num = 1,
+ .max_load = 2563200,
+ .hfi_version = HFI_VERSION_3XX,
+ .vmem_id = VIDC_RESOURCE_NONE,
+ .vmem_size = 0,
+ .vmem_addr = 0,
+ .dma_mask = 0xddc00000 - 1,
+ .fwname = "qcom/venus-4.4/venus.mbn",
+};
+
static const struct freq_tbl sdm660_freq_table[] = {
{ 979200, 518400000 },
{ 489600, 441600000 },
@@ -891,6 +928,7 @@ static const struct venus_resources sc7280_res = {
static const struct of_device_id venus_dt_match[] = {
{ .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
{ .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
+ { .compatible = "qcom,msm8998-venus", .data = &msm8998_res, },
{ .compatible = "qcom,sdm660-venus", .data = &sdm660_res, },
{ .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
{ .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
@Vikash, are you saying that perhaps the DTS for video-codec@cc00000
needs to be written slightly differently?
Regards
next prev parent reply other threads:[~2024-02-20 14:45 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-19 17:18 [RFC WIP PATCH] venus: add qcom,no-low-power property Marc Gonzalez
2024-02-19 17:28 ` Konrad Dybcio
2024-02-19 17:44 ` Dmitry Baryshkov
2024-02-19 19:24 ` Bryan O'Donoghue
2024-02-20 10:56 ` Marc Gonzalez
2024-02-20 11:21 ` Bryan O'Donoghue
2024-02-20 11:37 ` Krzysztof Kozlowski
2024-02-20 12:34 ` Marc Gonzalez
2024-02-20 13:27 ` Krzysztof Kozlowski
2024-02-20 13:53 ` Vikash Garodia
2024-02-20 14:45 ` Marc Gonzalez [this message]
2024-02-23 13:48 ` Vikash Garodia
2024-02-26 13:09 ` Marc Gonzalez
2024-02-26 14:30 ` Vikash Garodia
2024-02-26 15:55 ` Marc Gonzalez
2024-02-27 6:55 ` Vikash Garodia
2024-02-27 16:11 ` Marc Gonzalez
2024-02-29 15:32 ` Vikash Garodia
2024-02-29 16:24 ` Marc Gonzalez
2024-02-29 16:47 ` Jeffrey Hugo
2024-03-12 18:39 ` Konrad Dybcio
2024-04-10 10:24 ` Vikash Garodia
2024-04-08 15:39 ` Marc Gonzalez
2024-04-09 11:27 ` Bryan O'Donoghue
2024-04-09 14:09 ` Marc Gonzalez
2024-04-09 16:53 ` Marc Gonzalez
2024-04-10 8:17 ` Bryan O'Donoghue
2024-04-10 10:34 ` Vikash Garodia
2024-04-10 12:23 ` Marc Gonzalez
2024-04-10 13:14 ` Bryan O'Donoghue
2024-04-10 13:18 ` Marc Gonzalez
2024-04-10 13:29 ` Bryan O'Donoghue
2024-04-10 13:31 ` Bryan O'Donoghue
2024-04-11 9:02 ` Bryan O'Donoghue
2024-04-25 16:43 ` Marc Gonzalez
2024-04-30 16:13 ` venus decoder hangs at EOF Marc Gonzalez
2024-02-19 18:33 ` [RFC WIP PATCH] venus: add qcom,no-low-power property Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c6a9c20e-02d3-4334-badd-2efe5be9ce7e@freebox.fr \
--to=mgonzalez@freebox.fr \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=phh@phh.me \
--cc=quic_vgarodia@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=stanimir.k.varbanov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).