From: Roshan Khatri <topofeverest8848@gmail.com>
To: hdegoede@redhat.com, mchehab@kernel.org,
sakari.ailus@linux.intel.com, hpa@redhat.com,
hverkuil-cisco@xs4all.nl, gregkh@linuxfoundation.org
Cc: Roshan Khatri <topofeverest8848@gmail.com>,
linux-media@vger.kernel.org, linux-staging@lists.linux.dev,
linux-kernel@vger.kernel.org
Subject: [PATCH] staging: atomisp: Fix spelling mistakes in sh_css_sp.c
Date: Tue, 7 May 2024 11:10:12 +0545 [thread overview]
Message-ID: <20240507052512.7296-1-topofeverest8848@gmail.com> (raw)
Codespell reported misspelled fields,suppress,separately and offset in
file sh_css_sp.c. This patch fixes the misspellings.
Signed-off-by: Roshan Khatri <topofeverest8848@gmail.com>
---
drivers/staging/media/atomisp/pci/sh_css_sp.c | 20 +++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/media/atomisp/pci/sh_css_sp.c b/drivers/staging/media/atomisp/pci/sh_css_sp.c
index cd7f5a3fecaa..9da89290c954 100644
--- a/drivers/staging/media/atomisp/pci/sh_css_sp.c
+++ b/drivers/staging/media/atomisp/pci/sh_css_sp.c
@@ -1038,7 +1038,7 @@ sh_css_sp_init_stage(struct ia_css_binary *binary,
if (binary->info->sp.pipeline.mode == IA_CSS_BINARY_MODE_PREVIEW &&
(binary->vf_downscale_log2 > 0)) {
/* TODO: Remove this after preview output decimation is fixed
- * by configuring out&vf info fiels properly */
+ * by configuring out&vf info fields properly */
sh_css_sp_stage.frames.out[0].info.padded_width
<<= binary->vf_downscale_log2;
sh_css_sp_stage.frames.out[0].info.res.width
@@ -1333,7 +1333,7 @@ bool sh_css_write_host2sp_command(enum host2sp_commands host2sp_command)
host2sp_command)
/ sizeof(int);
enum host2sp_commands last_cmd = host2sp_cmd_error;
- (void)HIVE_ADDR_host_sp_com; /* Suppres warnings in CRUN */
+ (void)HIVE_ADDR_host_sp_com; /* Suppress warnings in CRUN */
/* Previous command must be handled by SP (by design) */
last_cmd = load_sp_array_uint(host_sp_com, offset);
@@ -1351,7 +1351,7 @@ sh_css_read_host2sp_command(void)
unsigned int HIVE_ADDR_host_sp_com = sh_css_sp_fw.info.sp.host_sp_com;
unsigned int offset = (unsigned int)offsetof(struct host_sp_communication, host2sp_command)
/ sizeof(int);
- (void)HIVE_ADDR_host_sp_com; /* Suppres warnings in CRUN */
+ (void)HIVE_ADDR_host_sp_com; /* Suppress warnings in CRUN */
return (enum host2sp_commands)load_sp_array_uint(host_sp_com, offset);
}
@@ -1359,7 +1359,7 @@ sh_css_read_host2sp_command(void)
* Frame data is no longer part of the sp_stage structure but part of a
* separate structure. The aim is to make the sp_data struct static
* (it defines a pipeline) and that the dynamic (per frame) data is stored
- * separetly.
+ * separately.
*
* This function must be called first every where were you start constructing
* a new pipeline by defining one or more stages with use of variable
@@ -1372,7 +1372,7 @@ sh_css_init_host2sp_frame_data(void)
/* Clean table */
unsigned int HIVE_ADDR_host_sp_com = sh_css_sp_fw.info.sp.host_sp_com;
- (void)HIVE_ADDR_host_sp_com; /* Suppres warnings in CRUN */
+ (void)HIVE_ADDR_host_sp_com; /* Suppress warnings in CRUN */
/*
* rvanimme: don't clean it to save static frame info line ref_in
* ref_out, and tnr_frames. Once this static data is in a
@@ -1551,7 +1551,7 @@ ia_css_pipe_set_irq_mask(struct ia_css_pipe *pipe,
* - different assert for Linux and Windows
*/
- (void)HIVE_ADDR_host_sp_com; /* Suppres warnings in CRUN */
+ (void)HIVE_ADDR_host_sp_com; /* Suppress warnings in CRUN */
IA_CSS_LOG("or_mask=%x, and_mask=%x", or_mask, and_mask);
event_irq_mask.or_mask = (uint16_t)or_mask;
@@ -1580,7 +1580,7 @@ ia_css_event_get_irq_mask(const struct ia_css_pipe *pipe,
struct sh_css_event_irq_mask event_irq_mask;
unsigned int pipe_num;
- (void)HIVE_ADDR_host_sp_com; /* Suppres warnings in CRUN */
+ (void)HIVE_ADDR_host_sp_com; /* Suppress warnings in CRUN */
IA_CSS_ENTER_LEAVE("");
@@ -1630,7 +1630,7 @@ sh_css_sp_start_isp(void)
if (sp_running)
return;
- (void)HIVE_ADDR_sp_sw_state; /* Suppres warnings in CRUN */
+ (void)HIVE_ADDR_sp_sw_state; /* Suppress warnings in CRUN */
/* no longer here, sp started immediately */
/*ia_css_debug_pipe_graph_dump_epilogue();*/
@@ -1669,7 +1669,7 @@ ia_css_isp_has_started(void)
{
const struct ia_css_fw_info *fw = &sh_css_sp_fw;
unsigned int HIVE_ADDR_ia_css_ispctrl_sp_isp_started = fw->info.sp.isp_started;
- (void)HIVE_ADDR_ia_css_ispctrl_sp_isp_started; /* Suppres warnings in CRUN */
+ (void)HIVE_ADDR_ia_css_ispctrl_sp_isp_started; /* Suppress warnings in CRUN */
return (bool)load_sp_uint(ia_css_ispctrl_sp_isp_started);
}
@@ -1724,7 +1724,7 @@ sh_css_sp_set_dma_sw_reg(int dma_id,
sw_reg =
sh_css_sp_group.debug.dma_sw_reg;
- /* get the offest of the target bit */
+ /* get the offset of the target bit */
bit_offset = (8 * request_type) + channel_id;
/* clear the value of the target bit */
--
2.34.1
reply other threads:[~2024-05-07 5:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240507052512.7296-1-topofeverest8848@gmail.com \
--to=topofeverest8848@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=hpa@redhat.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).