From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Cc: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
"Tomi Valkeinen" <tomi.valkeinen@ideasonboard.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH 06/19] media: adv748x: Use routes to configure VC
Date: Thu, 2 May 2024 20:51:15 +0300 [thread overview]
Message-ID: <20240502175115.GL15807@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20240430103956.60190-7-jacopo.mondi@ideasonboard.com>
Hi Jacopo,
Thank you for the patch.
On Tue, Apr 30, 2024 at 12:39:42PM +0200, Jacopo Mondi wrote:
> Use the newly introduced routing table to configure on which MIPI
> CSI-2 Virtual Channel to send the image stream on.
The stream ID in the routing API isn't meant to be mapped directly to a
virtual channel number.
Sakari, your opinion would be appreciated.
> Perform Virtual Channel selection at s_stream() time instead of
> forcing it to 0 during the chip reset.
>
> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
> ---
> drivers/media/i2c/adv748x/adv748x-core.c | 8 ++------
> drivers/media/i2c/adv748x/adv748x-csi2.c | 22 ++++++++++++++++++++--
> drivers/media/i2c/adv748x/adv748x.h | 1 -
> 3 files changed, 22 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
> index 3abc73ea8ccb..c9d917135709 100644
> --- a/drivers/media/i2c/adv748x/adv748x-core.c
> +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> @@ -530,14 +530,10 @@ static int adv748x_reset(struct adv748x_state *state)
> io_write(state, ADV748X_IO_PD, ADV748X_IO_PD_RX_EN);
>
> /* Conditionally enable TXa and TXb. */
> - if (is_tx_enabled(&state->txa)) {
> + if (is_tx_enabled(&state->txa))
> regval |= ADV748X_IO_10_CSI4_EN;
> - adv748x_csi2_set_virtual_channel(&state->txa, 0);
> - }
> - if (is_tx_enabled(&state->txb)) {
> + if (is_tx_enabled(&state->txb))
> regval |= ADV748X_IO_10_CSI1_EN;
> - adv748x_csi2_set_virtual_channel(&state->txb, 0);
> - }
> io_write(state, ADV748X_IO_10, regval);
>
> /* Use vid_std and v_freq as freerun resolution for CP */
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c b/drivers/media/i2c/adv748x/adv748x-csi2.c
> index 7fa72340e66e..a7bfed393ff0 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -14,7 +14,8 @@
>
> #include "adv748x.h"
>
> -int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx, unsigned int vc)
> +static int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx,
> + unsigned int vc)
> {
> return tx_write(tx, ADV748X_CSI_VC_REF, vc << ADV748X_CSI_VC_REF_SHIFT);
> }
> @@ -175,13 +176,30 @@ static const struct v4l2_subdev_internal_ops adv748x_csi2_internal_ops = {
> static int adv748x_csi2_s_stream(struct v4l2_subdev *sd, int enable)
> {
> struct adv748x_csi2 *tx = adv748x_sd_to_csi2(sd);
> + struct v4l2_subdev_state *state;
> struct v4l2_subdev *src;
> + int ret;
>
> src = adv748x_get_remote_sd(&tx->pads[ADV748X_CSI2_SINK]);
> if (!src)
> return -EPIPE;
>
> - return v4l2_subdev_call(src, video, s_stream, enable);
> + state = v4l2_subdev_lock_and_get_active_state(sd);
> +
> + if (enable) {
> + /* A single route is available. */
> + struct v4l2_subdev_route *route = &state->routing.routes[0];
> +
> + ret = adv748x_csi2_set_virtual_channel(tx, route->source_stream);
> + if (ret)
> + goto unlock;
> + }
> +
> + ret = v4l2_subdev_call(src, video, s_stream, enable);
> +unlock:
> + v4l2_subdev_unlock_state(state);
> +
> + return ret;
> }
>
> static const struct v4l2_subdev_video_ops adv748x_csi2_video_ops = {
> diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
> index be24bc57767c..95d04468af9d 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -434,7 +434,6 @@ int adv748x_afe_s_input(struct adv748x_afe *afe, unsigned int input);
>
> int adv748x_csi2_init(struct adv748x_state *state, struct adv748x_csi2 *tx);
> void adv748x_csi2_cleanup(struct adv748x_csi2 *tx);
> -int adv748x_csi2_set_virtual_channel(struct adv748x_csi2 *tx, unsigned int vc);
> int adv748x_csi2_set_pixelrate(struct v4l2_subdev *sd, s64 rate);
>
> int adv748x_hdmi_init(struct adv748x_hdmi *hdmi);
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2024-05-02 17:51 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-30 10:39 [PATCH 00/19] media: renesas: rcar-csi2: Support multiple streams Jacopo Mondi
2024-04-30 10:39 ` [PATCH 01/19] media: adv748x: Add support for active state Jacopo Mondi
2024-05-02 17:34 ` Laurent Pinchart
2024-05-03 7:55 ` Jacopo Mondi
2024-05-03 8:24 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 02/19] media: adv748x: Add flags to adv748x_subdev_init() Jacopo Mondi
2024-05-02 17:37 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 03/19] media: adv748x: Use V4L2 streams Jacopo Mondi
2024-05-02 17:40 ` Laurent Pinchart
2024-05-03 7:59 ` Jacopo Mondi
2024-05-03 8:31 ` Laurent Pinchart
2024-05-03 8:46 ` Tomi Valkeinen
2024-04-30 10:39 ` [PATCH 04/19] media: adv748x: Propagate format to opposite stream Jacopo Mondi
2024-05-02 17:41 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 05/19] media: adv748x: Implement set_routing() Jacopo Mondi
2024-05-02 17:49 ` Laurent Pinchart
2024-05-03 8:02 ` Jacopo Mondi
2024-04-30 10:39 ` [PATCH 06/19] media: adv748x: Use routes to configure VC Jacopo Mondi
2024-05-02 17:51 ` Laurent Pinchart [this message]
2024-05-02 17:52 ` Laurent Pinchart
2024-05-03 8:05 ` Jacopo Mondi
2024-04-30 10:39 ` [PATCH 07/19] media: adv748x: Implement .get_frame_desc() Jacopo Mondi
2024-05-02 17:57 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 08/19] media: max9286: Add support for subdev active state Jacopo Mondi
2024-05-02 18:10 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 09/19] media: max9286: Fix enum_mbus_code Jacopo Mondi
2024-05-02 18:14 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 10/19] media: max9286: Use frame interval from subdev state Jacopo Mondi
2024-05-02 18:23 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 11/19] media: max9286: Use V4L2 Streams Jacopo Mondi
2024-05-02 18:25 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 12/19] media: max9286: Implement .get_frame_desc() Jacopo Mondi
2024-05-02 18:32 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 13/19] media: max9286: Implement support for LINK_FREQ Jacopo Mondi
2024-05-02 18:36 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 14/19] media: max9286: Implement .get_mbus_config() Jacopo Mondi
2024-05-02 18:37 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 15/19] media: rcar-csi2: Add support for multiplexed streams Jacopo Mondi
2024-05-02 14:23 ` Niklas Söderlund
2024-05-02 18:41 ` Laurent Pinchart
2024-05-03 8:05 ` Jacopo Mondi
2024-04-30 10:39 ` [PATCH 16/19] media: rcar-csi2: Support multiplexed transmitters Jacopo Mondi
2024-05-02 14:30 ` Niklas Söderlund
2024-05-02 21:56 ` Laurent Pinchart
2024-05-03 8:07 ` Jacopo Mondi
2024-04-30 10:39 ` [PATCH 17/19] media: rcar-csi2: Store format in the subdev state Jacopo Mondi
2024-05-02 14:32 ` Niklas Söderlund
2024-05-02 22:00 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 18/19] media: rcar-csi2: Implement set_routing Jacopo Mondi
2024-05-02 22:16 ` Laurent Pinchart
2024-04-30 10:39 ` [PATCH 19/19] media: rcar-vin: Fix YUYV8_1X16 handling for CSI-2 Jacopo Mondi
2024-05-02 14:33 ` Niklas Söderlund
2024-05-02 22:16 ` Laurent Pinchart
2024-04-30 11:17 ` [PATCH 00/19] media: renesas: rcar-csi2: Support multiple streams Niklas Söderlund
2024-04-30 11:51 ` Jacopo Mondi
2024-05-02 17:35 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240502175115.GL15807@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=jacopo.mondi@ideasonboard.com \
--cc=kieran.bingham+renesas@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).