From: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
To: Linux Media Mailing List <linux-media@vger.kernel.org>
Cc: Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
David Plowman <david.plowman@raspberrypi.com>,
Naushir Patuck <naush@raspberrypi.com>,
Nick Hollinghurst <nick.hollinghurst@raspberrypi.org>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Kieran Bingham <kieran.bingham@ideasonboard.com>,
Sakari Ailus <sakari.ailus@iki.fi>,
Hans Verkuil <hverkuil-cisco@xs4all.nl>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: [PATCH v6 0/7] media: raspberrypi: Add support for PiSP Back End
Date: Thu, 2 May 2024 13:04:55 +0200 [thread overview]
Message-ID: <20240502110503.38412-1-jacopo.mondi@ideasonboard.com> (raw)
v6 with minor updates.
If no further comments, I think the series is ready to be collected (for v6.11)
v5->v6:
- Rebase on recent media_stage master branch
- Remove Y12 and Y14 formats as they have upstreamed already
- Squash in patch from Naush from
https://github.com/raspberrypi/linux/pull/6140
v4->v5:
- Address Sakari's style comments on the driver
- Add Naush's tags
v3->v4:
- Rename the compressed RAW formats and change the page title
- Minor fixes to the RGB48 documentation
- Remove the clock name from bindings and driver
v2->v3:
- Expand documentation of RGB48 formats
- Add back to the bindings the 'aclk' clock-names property
- Explicitly get the clock by name in the driver
- minor fixes
v1->v2:
- Add Y12P and Y14P formats to yuv-luma.rst instead of documenting them
separately
- Fix typos in formats and documentation
- Adjust bindings as suggested during review
- Fix admin-guide with an up-to-media media graph (remove the HOG node)
- Add a patch to the driver to safely clean-up the video devices buffer queues
in case of errors
https://github.com/raspberrypi/linux/commit/9fcfb8ee070ecc2ca9b4fcf4629c4545f9cf178e
Add support for the Raspberry Pi PiSP Back End memory-2-memory ISP.
Documentation available at:
https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
The PiSP Back End is the memory-2-memory ISP found on Raspberry Pi 5. In
conjunction with the PiSP Front End, for which a driver is expected to
hit mainline in the next weeks, it implements the Raspberry Pi 5 camera
system.
The ISP is fully supported in the Raspberry Pi libcamera version and once
patches for the PiSP Front End will hit mainline the support will land in
mainline libcamera as well.
Patch based on media-stage master branch.
A branch is available at
git://git.kernel.org/pub/scm/linux/kernel/git/jmondi/linux.git
#pispbe/media-staging/be-upstream-v6
-------------------- Hans' build scripts build summary ------------------------
date: Fri Feb 9 14:29:10 CET 2024
media-tree git repo: git://git.kernel.org/pub/scm/linux/kernel/git/jmondi/linux.git
media-tree git branch: jmondi/pispbe/media-staging/be-upstream
media-tree git hash: 728775b95062efdecedad4df4013a8db5382d470
v4l-utils git hash: 4a6a3725dd192759c2998311b00440b84c60df57
edid-decode git hash: 5f723267e04deb3aa9610483514a02bcee10d9c2
gcc version: i686-linux-gcc (GCC) 13.1.0
ccache version: ccache version 4.7.5
smatch/sparse repo: git://repo.or.cz/smatch.git
smatch version: v0.5.0-8575-g7162b9ec
sparse version: v0.5.0-8575-g7162b9ec
build-scripts repo: https://git.linuxtv.org/hverkuil/build-scripts.git
build-scripts git hash: 745fc7cf5ba1a1a841374c61e8470852232584c1
host hardware: x86_64
host os: 6.1.0-10-amd64
linux-git-arm: OK
linux-git-arm64: OK
linux-git-powerpc64: OK
linux-git-i686: OK
linux-git-x86_64: OK
no-acpi.config: OK
no-of.config: OK
no-pm.config: OK
no-pm-sleep.config: OK
no-debug-fs.config: OK
sparse: WARNINGS:
drivers/media/usb/siano/smsusb.c:53:38: warning: array of flexible structures
smatch: WARNINGS:
drivers/media/i2c/adv7180.c:1526 adv7180_probe() warn: 'client->irq' from request_threaded_irq() not released on lines: 1526.
drivers/media/usb/siano/smsusb.c:53:38: warning: array of flexible structures
drivers/media/platform/st/sti/hva/hva-hw.c:412 hva_hw_probe() warn: 'hva->clk' from clk_prepare() not released on lines: 412.
COMPILE_TEST: OK
strcpy/strncpy/strlcpy: OK
abi-compliance: ABI OK
pahole: ABI OK
spec-git: OK
kerneldoc: WARNINGS:
include/media/v4l2-vp9.h:144: warning: Excess struct member 'partition' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'skip' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'intra_inter' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'tx32p' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'tx16p' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'tx8p' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'y_mode' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'uv_mode' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'comp' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'comp_ref' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'single_ref' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'mv_mode' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'filter' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'mv_joint' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'sign' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'classes' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'class0' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'bits' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'class0_fp' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'fp' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'class0_hp' description in 'v4l2_vp9_frame_symbol_counts'
include/media/v4l2-vp9.h:144: warning: Excess struct member 'hp' description in 'v4l2_vp9_frame_symbol_counts'
date: Fri Feb 9 15:38:02 CET 2024
-------------------------------------------------------------------------------
--------------------------- V4L2 compliance -----------------------------------
pi@raspberrypi:~/v4l-utils$ ./build/utils/v4l2-compliance/v4l2-compliance -d /dev/video4
v4l2-compliance 1.27.0-5174, 64 bits, 64-bit time_t
v4l2-compliance SHA: d700deb14368 2024-01-18 12:19:05
Compliance test for pispbe device /dev/video0:
Total for pispbe device /dev/video4: 47, Succeeded: 47, Failed: 0, Warnings: 0
Compliance test for pispbe device /dev/video1:
Total for pispbe device /dev/video4: 47, Succeeded: 47, Failed: 0, Warnings: 0
Compliance test for pispbe device /dev/video2:
Total for pispbe device /dev/video4: 47, Succeeded: 47, Failed: 0, Warnings: 0
Compliance test for pispbe device /dev/video3:
Total for pispbe device /dev/video4: 47, Succeeded: 47, Failed: 0, Warnings: 0
Compliance test for pispbe device /dev/video4:
Total for pispbe device /dev/video4: 47, Succeeded: 47, Failed: 0, Warnings: 0
Compliance test for pispbe device /dev/video5:
Total for pispbe device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0
Compliance test for pispbe device /dev/video6:
Total for pispbe device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0
Compliance test for pispbe device /dev/video7:
Total for pispbe device /dev/video0: 47, Succeeded: 47, Failed: 0, Warnings: 0
-------------------------------------------------------------------------------
Jacopo Mondi (6):
media: uapi: pixfmt-luma: Document MIPI CSI-2 packing
media: uapi: Add a pixel format for BGR48 and RGB48
media: uapi: Add meta pixel format for PiSP BE config
media: uapi: Add PiSP Compressed RAW Bayer formats
media: dt-bindings: Add bindings for Raspberry Pi PiSP Back End
media: admin-guide: Document the Raspberry Pi PiSP BE
Naushir Patuck (1):
media: raspberrypi: Add support for PiSP BE
.../admin-guide/media/raspberrypi-pisp-be.dot | 20 +
.../admin-guide/media/raspberrypi-pisp-be.rst | 112 +
.../admin-guide/media/v4l-drivers.rst | 1 +
.../bindings/media/raspberrypi,pispbe.yaml | 63 +
.../userspace-api/media/v4l/meta-formats.rst | 1 +
.../media/v4l/metafmt-pisp-be.rst | 46 +
.../userspace-api/media/v4l/pixfmt-bayer.rst | 1 +
.../userspace-api/media/v4l/pixfmt-rgb.rst | 54 +
.../media/v4l/pixfmt-srggb8-pisp-comp.rst | 74 +
.../media/v4l/pixfmt-yuv-luma.rst | 4 +
MAINTAINERS | 8 +
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 1 +
drivers/media/platform/raspberrypi/Kconfig | 5 +
drivers/media/platform/raspberrypi/Makefile | 3 +
.../platform/raspberrypi/pisp_be/Kconfig | 12 +
.../platform/raspberrypi/pisp_be/Makefile | 6 +
.../platform/raspberrypi/pisp_be/pisp_be.c | 1848 +++++++++++++++++
.../raspberrypi/pisp_be/pisp_be_formats.h | 519 +++++
drivers/media/v4l2-core/v4l2-common.c | 2 +
drivers/media/v4l2-core/v4l2-ioctl.c | 13 +
.../linux/media/raspberrypi/pisp_be_config.h | 510 +++++
.../linux/media/raspberrypi/pisp_common.h | 199 ++
include/uapi/linux/videodev2.h | 17 +
24 files changed, 3520 insertions(+)
create mode 100644 Documentation/admin-guide/media/raspberrypi-pisp-be.dot
create mode 100644 Documentation/admin-guide/media/raspberrypi-pisp-be.rst
create mode 100644 Documentation/devicetree/bindings/media/raspberrypi,pispbe.yaml
create mode 100644 Documentation/userspace-api/media/v4l/metafmt-pisp-be.rst
create mode 100644 Documentation/userspace-api/media/v4l/pixfmt-srggb8-pisp-comp.rst
create mode 100644 drivers/media/platform/raspberrypi/Kconfig
create mode 100644 drivers/media/platform/raspberrypi/Makefile
create mode 100644 drivers/media/platform/raspberrypi/pisp_be/Kconfig
create mode 100644 drivers/media/platform/raspberrypi/pisp_be/Makefile
create mode 100644 drivers/media/platform/raspberrypi/pisp_be/pisp_be.c
create mode 100644 drivers/media/platform/raspberrypi/pisp_be/pisp_be_formats.h
create mode 100644 include/uapi/linux/media/raspberrypi/pisp_be_config.h
create mode 100644 include/uapi/linux/media/raspberrypi/pisp_common.h
--
2.44.0
next reply other threads:[~2024-05-02 11:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-02 11:04 Jacopo Mondi [this message]
2024-05-02 11:04 ` [PATCH v6 1/7] media: uapi: pixfmt-luma: Document MIPI CSI-2 packing Jacopo Mondi
2024-05-02 11:04 ` [PATCH v6 2/7] media: uapi: Add a pixel format for BGR48 and RGB48 Jacopo Mondi
2024-05-02 11:04 ` [PATCH v6 3/7] media: uapi: Add meta pixel format for PiSP BE config Jacopo Mondi
2024-05-02 11:04 ` [PATCH v6 4/7] media: uapi: Add PiSP Compressed RAW Bayer formats Jacopo Mondi
2024-05-02 11:05 ` [PATCH v6 5/7] media: dt-bindings: Add bindings for Raspberry Pi PiSP Back End Jacopo Mondi
2024-05-02 11:05 ` [PATCH v6 6/7] media: raspberrypi: Add support for PiSP BE Jacopo Mondi
2024-05-02 11:05 ` [PATCH v6 7/7] media: admin-guide: Document the Raspberry Pi " Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240502110503.38412-1-jacopo.mondi@ideasonboard.com \
--to=jacopo.mondi@ideasonboard.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=david.plowman@raspberrypi.com \
--cc=hverkuil-cisco@xs4all.nl \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=naush@raspberrypi.com \
--cc=nick.hollinghurst@raspberrypi.org \
--cc=sakari.ailus@iki.fi \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).