From: Zheng Yejian <zhengyejian1@huawei.com>
To: <mchehab@kernel.org>
Cc: <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<zhengyejian1@huawei.com>
Subject: [PATCH] media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()
Date: Fri, 12 Apr 2024 21:52:56 +0800 [thread overview]
Message-ID: <20240412135256.1546051-1-zhengyejian1@huawei.com> (raw)
Infinite log printing occurs during fuzz test:
rc rc1: DViCO FusionHDTV DVB-T USB (LGZ201) as ...
...
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: DViCO FusionHDTV DVB-T USB (LGZ201) successfully initialized ...
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
...
dvb-usb: bulk message failed: -22 (1/0)
Looking into the codes, there is a loop in dvb_usb_read_remote_control(),
that is in rc_core_dvb_usb_remote_init() create a work that will call
dvb_usb_read_remote_control(), and this work will reschedule itself at
'rc_interval' intervals to recursively call dvb_usb_read_remote_control(),
see following code snippet:
rc_core_dvb_usb_remote_init() {
...
INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
...
}
dvb_usb_read_remote_control() {
...
err = d->props.rc.core.rc_query(d);
if (err)
err(...) // Did not return even if query failed
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
}
When the infinite log printing occurs, the query callback
'd->props.rc.core.rc_query' is cxusb_rc_query(). And the log is due to
the failure of finding a valid 'generic_bulk_ctrl_endpoint'
in usb_bulk_msg(), see following code snippet:
cxusb_rc_query() {
cxusb_ctrl_msg() {
dvb_usb_generic_rw() {
ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev,
d->props.generic_bulk_ctrl_endpoint),...);
if (ret)
err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
...
}
...
}
By analyzing the corresponding USB descriptor, it shows that the
bNumEndpoints is 0 in its interface descriptor, but
the 'generic_bulk_ctrl_endpoint' is 1, that means user don't configure
a valid endpoint for 'generic_bulk_ctrl_endpoint', therefore this
'invalid' USB device should be rejected before it calls into
dvb_usb_read_remote_control().
To fix it, iiuc, we can add endpoint check in dvb_usb_adapter_init().
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
---
drivers/media/usb/dvb-usb/dvb-usb-init.c | 8 ++++++++
1 file changed, 8 insertions(+)
Hi, I'm not very familiar with USB driver, and I'm not sure the
type check is appropriate or not here. Would be any device properties
that allow 'generic_bulk_ctrl_endpoint' not being configured, or would
it be configured late after init ? :)
diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c
index fbf58012becd..48e7b9fb93dd 100644
--- a/drivers/media/usb/dvb-usb/dvb-usb-init.c
+++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c
@@ -104,6 +104,14 @@ static int dvb_usb_adapter_init(struct dvb_usb_device *d, short *adapter_nrs)
* sometimes a timeout occurs, this helps
*/
if (d->props.generic_bulk_ctrl_endpoint != 0) {
+ ret = usb_pipe_type_check(d->udev, usb_sndbulkpipe(d->udev,
+ d->props.generic_bulk_ctrl_endpoint));
+ if (ret)
+ goto frontend_init_err;
+ ret = usb_pipe_type_check(d->udev, usb_rcvbulkpipe(d->udev,
+ d->props.generic_bulk_ctrl_endpoint));
+ if (ret)
+ goto frontend_init_err;
usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
}
--
2.25.1
next reply other threads:[~2024-04-12 13:52 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-12 13:52 Zheng Yejian [this message]
2024-04-29 11:24 ` [PATCH] media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control() Zheng Yejian
2024-04-30 8:04 ` Sean Young
2024-04-30 9:19 ` Zheng Yejian
2024-04-30 9:36 ` Sean Young
2024-04-30 10:05 ` Zheng Yejian
2024-04-30 10:41 ` [PATCH v2] " Zheng Yejian
2024-05-03 11:51 ` Sean Young
2024-05-09 12:44 ` [PATCH v3] " Zheng Yejian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240412135256.1546051-1-zhengyejian1@huawei.com \
--to=zhengyejian1@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).