linux-laptop.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Mr. James W. Laferriere" <babydr@baby-dragons.com>
To: linux-laptop@vger.kernel.org
Subject: Re: cs: warning: no high memory space available!
Date: Mon, 8 Sep 2003 19:14:46 -0400 (EDT)	[thread overview]
Message-ID: <Pine.LNX.4.56.0309081912470.26440@filesrv1.baby-dragons.com> (raw)
In-Reply-To: <Pine.LNX.4.56.0309081905250.26440@filesrv1.baby-dragons.com>

	Hello All ,  Oops .  Forgot ver_linux .

Linux jimlabs 2.4.22 #6 Sun Sep 7 20:44:47 EDT 2003 i686 unknown
Gnu C                  3.2.2
Gnu make               3.80
util-linux             2.11z
mount                  2.11z
modutils               2.4.22
e2fsprogs              1.32
jfsutils               1.1.1
reiserfsprogs          3.6.4
pcmcia-cs              3.2.4
quota-tools            3.08.
PPP                    2.4.1
Linux C Library        2.3.1
Dynamic linker (ldd)   2.3.1
Linux C++ Library      5.0.2
Procps                 3.1.6
Net-tools              1.60
Kbd                    1.08
Sh-utils               2.0
Modules Loaded

On Mon, 8 Sep 2003, Mr. James W. Laferriere wrote:
> 	Hello All ,
> 	Any device I put into any pcmcia/cardbus slot on my Dell C810
> 	laptop gives me "cs: unable to map card memory!" .  I have
> 	tried a IBM Data/Fax Modem pcmcia mdl: XJ 1560 ,  fru: 04K0054
> 	& 3Com 11mbps wireless LAN OfficeConnect PC Card
> 	mdl: 3CRSHPW196 or SL-1110 ,  Ver. 1.0 .  Any pointers welcome .
> 	I hae already looked at & checked the faqs at
> 	http://www.whacked.net/ldl-faq/faq/  &
> 	http://people.mech.kuleuven.ac.be/~kgadeyne/linux/dell.html#pcmcia
> 		Tia ,  JimL
>
>   # dmesg | tail -18
> Adding Swap: 530136k swap-space (priority -1)
> cs: IO port probe 0x0c00-0x0cff: clean.
> cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7
> cs: IO port probe 0x0a00-0x0aff: clean.
> eth0: no IPv6 routers present
> cs: warning: no high memory space available!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
> cs: unable to map card memory!
>
>   # lspci -v
> 00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 04)
> 	Flags: bus master, fast devsel, latency 0
> 	Memory at e8000000 (32-bit, prefetchable) [size=64M]
> 	Capabilities: [88] #09 [e104]
> 	Capabilities: [a0] AGP version 2.0
>
> 00:01.0 PCI bridge: Intel Corp. 82815 815 Chipset AGP Bridge (rev 04) (prog-if 00 [Normal decode])
> 	Flags: bus master, 66Mhz, fast devsel, latency 32
> 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> 	I/O behind bridge: 0000c000-0000cfff
> 	Memory behind bridge: fc000000-fdffffff
> 	Prefetchable memory behind bridge: e0000000-e7ffffff
>
> 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 03) (prog-if 00 [Normal decode])
> 	Flags: bus master, fast devsel, latency 0
> 	Bus: primary=00, secondary=02, subordinate=10, sec-latency=32
> 	I/O behind bridge: 0000e000-0000ffff
> 	Memory behind bridge: f4000000-fbffffff
>
> 00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03)
> 	Flags: bus master, medium devsel, latency 0
>
> 00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03) (prog-if 80 [Master])
> 	Subsystem: Intel Corp.: Unknown device 4541
> 	Flags: bus master, medium devsel, latency 0
> 	I/O ports at bfa0 [size=16]
>
> 00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub #1) (rev 03) (prog-if 00 [UHCI])
> 	Subsystem: Intel Corp.: Unknown device 4541
> 	Flags: bus master, medium devsel, latency 0, IRQ 10
> 	I/O ports at dce0 [size=32]
>
> 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 Go] (rev b2) (prog-if 00 [VGA])
> 	Subsystem: Dell Computer Corporation: Unknown device 00e5
> 	Flags: bus master, VGA palette snoop, 66Mhz, medium devsel, latency 32, IRQ 11
> 	Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
> 	Memory at e0000000 (32-bit, prefetchable) [size=128M]
> 	Expansion ROM at <unassigned> [disabled] [size=64K]
> 	Capabilities: [60] Power Management version 2
> 	Capabilities: [44] AGP version 2.0
>
> 02:03.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator (rev 10)
> 	Subsystem: Dell Computer Corporation: Unknown device 00e5
> 	Flags: bus master, medium devsel, latency 32, IRQ 5
> 	I/O ports at ec00 [size=256]
> 	Memory at f8ffe000 (32-bit, non-prefetchable) [size=8K]
> 	Capabilities: [c0] Power Management version 2
>
> 02:06.0 Ethernet controller: 3Com Corporation 3c556 Hurricane CardBus (rev 10)
> 	Subsystem: 3Com Corporation: Unknown device 6456
> 	Flags: bus master, medium devsel, latency 32, IRQ 10
> 	I/O ports at e800 [size=256]
> 	Memory at f8ffdc00 (32-bit, non-prefetchable) [size=128]
> 	Memory at f8ffd800 (32-bit, non-prefetchable) [size=128]
> 	Expansion ROM at f9000000 [disabled] [size=128K]
> 	Capabilities: [50] Power Management version 2
>
> 02:06.1 Communication controller: 3Com Corporation Mini PCI 56k Winmodem (rev 10)
> 	Subsystem: 3Com Corporation: Unknown device 615b
> 	Flags: bus master, medium devsel, latency 32, IRQ 10
> 	I/O ports at e400 [size=256]
> 	Memory at f8ffd400 (32-bit, non-prefetchable) [size=256]
> 	Memory at f8ffd000 (32-bit, non-prefetchable) [size=128]
> 	Capabilities: [50] Power Management version 2
>
> 02:0f.0 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
> 	Subsystem: Dell Computer Corporation: Unknown device 00e5
> 	Flags: bus master, medium devsel, latency 168, IRQ 10
> 	Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
> 	Memory window 0: 20400000-207ff000 (prefetchable)
> 	Memory window 1: 20800000-20bff000
> 	I/O window 0: 00004000-000040ff
> 	I/O window 1: 00004400-000044ff
> 	16-bit legacy interface ports at 0001
>
> 02:0f.1 CardBus bridge: Texas Instruments PCI4451 PC card Cardbus Controller
> 	Subsystem: Dell Computer Corporation: Unknown device 00e5
> 	Flags: bus master, medium devsel, latency 168, IRQ 10
> 	Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
> 	Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
> 	Memory window 0: 20c00000-20fff000 (prefetchable)
> 	Memory window 1: 21000000-213ff000
> 	I/O window 0: 00004800-000048ff
> 	I/O window 1: 00004c00-00004cff
> 	16-bit legacy interface ports at 0001
>
> 02:0f.2 FireWire (IEEE 1394): Texas Instruments PCI4451 IEEE-1394 Controller (prog-if 10 [OHCI])
> 	Subsystem: Dell Computer Corporation: Unknown device 00e5
> 	Flags: bus master, medium devsel, latency 32, IRQ 10
> 	Memory at f8ffc800 (32-bit, non-prefetchable) [size=2K]
> 	Memory at f8ff8000 (32-bit, non-prefetchable) [size=16K]
> 	Capabilities: [44] Power Management version 2
-- 
       +------------------------------------------------------------------+
       | James   W.   Laferriere | System    Techniques | Give me VMS     |
       | Network        Engineer |     P.O. Box 854     |  Give me Linux  |
       | babydr@baby-dragons.com | Coudersport PA 16915 |   only  on  AXP |
       +------------------------------------------------------------------+

      reply	other threads:[~2003-09-08 23:14 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-09-08 23:07 cs: warning: no high memory space available! Mr. James W. Laferriere
2003-09-08 23:14 ` Mr. James W. Laferriere [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Pine.LNX.4.56.0309081912470.26440@filesrv1.baby-dragons.com \
    --to=babydr@baby-dragons.com \
    --cc=linux-laptop@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).