Linux-i3c Archive mirror
 help / color / mirror / Atom feed
From: Frank Li <Frank.Li@nxp.com>
To: miquel.raynal@bootlin.com
Cc: Frank.Li@nxp.com, alexandre.belloni@bootlin.com,
	conor.culhane@silvaco.com, imx@lists.linux.dev,
	linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] i3c: master: svc: fix invalidate IBI type and miss call client IBI handler
Date: Mon,  6 May 2024 12:40:09 -0400	[thread overview]
Message-ID: <20240506164009.21375-3-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240506164009.21375-1-Frank.Li@nxp.com>

In an In-Band Interrupt (IBI) handle, the code logic is as follows:

1: writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI | SVC_I3C_MCTRL_IBIRESP_AUTO,
	  master->regs + SVC_I3C_MCTRL);

2: ret = readl_relaxed_poll_timeout(master->regs + SVC_I3C_MSTATUS, val,
                                    SVC_I3C_MSTATUS_IBIWON(val), 0, 1000);
	...
3: ibitype = SVC_I3C_MSTATUS_IBITYPE(status);
   ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);

SVC_I3C_MSTATUS_IBIWON may be set before step 1. Thus, step 2 will return
immediately, and the I3C controller has not sent out the 9th SCL yet.
Consequently, ibitype and ibiaddr are 0, resulting in an unknown IBI type
occurrence and missing call I3C client driver's IBI handler.

A typical case is that SVC_I3C_MSTATUS_IBIWON is set when an IBI occurs
during the controller send start frame in svc_i3c_master_xfer().

Clear SVC_I3C_MSTATUS_IBIWON before issue SVC_I3C_MCTRL_REQUEST_AUTO_IBI
to fix this issue.

Cc: stable@vger.kernel.org
Fixes: 5e5e3c92e748 ("i3c: master: svc: fix wrong data return when IBI happen during start frame")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v1 to v2
    - improve comments.

 drivers/i3c/master/svc-i3c-master.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 94e4954509558..032fe032ec433 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -415,6 +415,19 @@ static void svc_i3c_master_ibi_work(struct work_struct *work)
 	int ret;
 
 	mutex_lock(&master->lock);
+	/*
+	 * IBIWON may be set before SVC_I3C_MCTRL_REQUEST_AUTO_IBI, causing
+	 * readl_relaxed_poll_timeout() to return immediately. Consequently,
+	 * ibitype will be 0 since it was last updated only after the 8th SCL
+	 * cycle, leading to missed client IBI handlers.
+	 *
+	 * A typical scenario is when IBIWON occurs and bus arbitration is lost
+	 * at svc_i3c_master_priv_xfers().
+	 *
+	 * Clear SVC_I3C_MINT_IBIWON before sending SVC_I3C_MCTRL_REQUEST_AUTO_IBI.
+	 */
+	writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
+
 	/* Acknowledge the incoming interrupt with the AUTOIBI mechanism */
 	writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI |
 	       SVC_I3C_MCTRL_IBIRESP_AUTO,
@@ -429,9 +442,6 @@ static void svc_i3c_master_ibi_work(struct work_struct *work)
 		goto reenable_ibis;
 	}
 
-	/* Clear the interrupt status */
-	writel(SVC_I3C_MINT_IBIWON, master->regs + SVC_I3C_MSTATUS);
-
 	status = readl(master->regs + SVC_I3C_MSTATUS);
 	ibitype = SVC_I3C_MSTATUS_IBITYPE(status);
 	ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status);
-- 
2.34.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

  parent reply	other threads:[~2024-05-06 16:40 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-06 16:40 [PATCH v2 1/3] i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers() Frank Li
2024-05-06 16:40 ` [PATCH v2 2/3] i3c: master: svc: change ENXIO to EAGAIN when IBI occurs during start frame Frank Li
2024-05-07  8:03   ` Miquel Raynal
2024-05-06 16:40 ` Frank Li [this message]
2024-05-07  8:04   ` [PATCH v2 3/3] i3c: master: svc: fix invalidate IBI type and miss call client IBI handler Miquel Raynal
2024-05-07  8:03 ` [PATCH v2 1/3] i3c: Add comment for -EAGAIN in i3c_device_do_priv_xfers() Miquel Raynal
2024-05-07 20:27 ` Alexandre Belloni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240506164009.21375-3-Frank.Li@nxp.com \
    --to=frank.li@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor.culhane@silvaco.com \
    --cc=imx@lists.linux.dev \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).