Linux-i3c Archive mirror
 help / color / mirror / Atom feed
From: Clark Wang <xiaoning.wang@nxp.com>
To: miquel.raynal@bootlin.com, conor.culhane@silvaco.com,
	alexandre.belloni@bootlin.com
Cc: linux-i3c@lists.infradead.org, linux-kernel@vger.kernel.org,
	xiaoning.wang@nxp.com
Subject: [PATCH V3 5/5] i3c: master: svc: add runtime pm support
Date: Fri, 16 Jul 2021 16:53:17 +0800	[thread overview]
Message-ID: <20210716085317.3572224-6-xiaoning.wang@nxp.com> (raw)
In-Reply-To: <20210716085317.3572224-1-xiaoning.wang@nxp.com>

Add runtime pm support to dynamically manage the clock.

Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
V2: New patch in V2.
V3:
 - restore the error path of probe function
 - enable runtime pm just before i3c module reset
---
 drivers/i3c/master/svc-i3c-master.c | 146 +++++++++++++++++++++++++---
 1 file changed, 133 insertions(+), 13 deletions(-)

diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c
index 5677b5b31a86..3121ffd82745 100644
--- a/drivers/i3c/master/svc-i3c-master.c
+++ b/drivers/i3c/master/svc-i3c-master.c
@@ -17,7 +17,9 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 
 /* Master Mode Registers */
 #define SVC_I3C_MCONFIG      0x000
@@ -119,6 +121,7 @@
 #define   SVC_MDYNADDR_ADDR(x) FIELD_PREP(GENMASK(7, 1), (x))
 
 #define SVC_I3C_MAX_DEVS 32
+#define SVC_I3C_PM_TIMEOUT_MS 1000
 
 /* This parameter depends on the implementation and may be tuned */
 #define SVC_I3C_FIFO_SIZE 16
@@ -452,10 +455,18 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 	u32 ppbaud, pplow, odhpp, odbaud, odstop, i2cbaud, reg;
 	int ret;
 
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
+		return ret;
+	}
+
 	/* Timings derivation */
 	fclk_rate = clk_get_rate(master->fclk);
-	if (!fclk_rate)
-		return -EINVAL;
+	if (!fclk_rate) {
+		ret = -EINVAL;
+		goto rpm_out;
+	}
 
 	fclk_period_ns = DIV_ROUND_UP(1000000000, fclk_rate);
 
@@ -499,7 +510,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 		odstop = 1;
 		break;
 	default:
-		return -EINVAL;
+		goto rpm_out;
 	}
 
 	reg = SVC_I3C_MCONFIG_MASTER_EN |
@@ -517,7 +528,7 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 	/* Master core's registration */
 	ret = i3c_master_get_free_addr(m, 0);
 	if (ret < 0)
-		return ret;
+		goto rpm_out;
 
 	info.dyn_addr = ret;
 
@@ -526,21 +537,35 @@ static int svc_i3c_master_bus_init(struct i3c_master_controller *m)
 
 	ret = i3c_master_set_info(&master->base, &info);
 	if (ret)
-		return ret;
+		goto rpm_out;
 
 	svc_i3c_master_enable_interrupts(master, SVC_I3C_MINT_SLVSTART);
 
-	return 0;
+rpm_out:
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
+
+	return ret;
 }
 
 static void svc_i3c_master_bus_cleanup(struct i3c_master_controller *m)
 {
 	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
+		return;
+	}
 
 	svc_i3c_master_disable_interrupts(master);
 
 	/* Disable master */
 	writel(0, master->regs + SVC_I3C_MCONFIG);
+
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
 }
 
 static int svc_i3c_master_reserve_slot(struct svc_i3c_master *master)
@@ -839,6 +864,12 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
 	unsigned int dev_nb;
 	int ret, i;
 
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
+		return ret;
+	}
+
 	spin_lock_irqsave(&master->xferqueue.lock, flags);
 	ret = svc_i3c_master_do_daa_locked(master, addrs, &dev_nb);
 	spin_unlock_irqrestore(&master->xferqueue.lock, flags);
@@ -849,22 +880,24 @@ static int svc_i3c_master_do_daa(struct i3c_master_controller *m)
 	for (i = 0; i < dev_nb; i++) {
 		ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
 		if (ret)
-			return ret;
+			goto rpm_out;
 	}
 
 	/* Configure IBI auto-rules */
 	ret = svc_i3c_update_ibirules(master);
-	if (ret) {
+	if (ret)
 		dev_err(master->dev, "Cannot handle such a list of devices");
-		return ret;
-	}
 
-	return 0;
+	goto rpm_out;
 
 emit_stop:
 	svc_i3c_master_emit_stop(master);
 	svc_i3c_master_clear_merrwarn(master);
 
+rpm_out:
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
+
 	return ret;
 }
 
@@ -936,6 +969,12 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 	u32 reg;
 	int ret;
 
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
+		return ret;
+	}
+
 	writel(SVC_I3C_MCTRL_REQUEST_START_ADDR |
 	       xfer_type |
 	       SVC_I3C_MCTRL_IBIRESP_NACK |
@@ -966,12 +1005,18 @@ static int svc_i3c_master_xfer(struct svc_i3c_master *master,
 	if (!continued)
 		svc_i3c_master_emit_stop(master);
 
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
+
 	return 0;
 
 emit_stop:
 	svc_i3c_master_emit_stop(master);
 	svc_i3c_master_clear_merrwarn(master);
 
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
+
 	return ret;
 }
 
@@ -1310,6 +1355,14 @@ static void svc_i3c_master_free_ibi(struct i3c_dev_desc *dev)
 static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
 {
 	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(master->dev);
+	if (ret < 0) {
+		dev_err(master->dev, "<%s> Cannot get runtime PM.\n", __func__);
+		return ret;
+	}
 
 	return i3c_master_enec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
 }
@@ -1317,8 +1370,15 @@ static int svc_i3c_master_enable_ibi(struct i3c_dev_desc *dev)
 static int svc_i3c_master_disable_ibi(struct i3c_dev_desc *dev)
 {
 	struct i3c_master_controller *m = i3c_dev_get_master(dev);
+	struct svc_i3c_master *master = to_svc_i3c_master(m);
+	int ret;
+
+	ret = i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
+
+	pm_runtime_mark_last_busy(master->dev);
+	pm_runtime_put_autosuspend(master->dev);
 
-	return i3c_master_disec_locked(m, dev->info.dyn_addr, I3C_CCC_EVENT_SIR);
+	return ret;
 }
 
 static void svc_i3c_master_recycle_ibi_slot(struct i3c_dev_desc *dev,
@@ -1436,16 +1496,31 @@ static int svc_i3c_master_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, master);
 
+	pm_runtime_set_autosuspend_delay(&pdev->dev, SVC_I3C_PM_TIMEOUT_MS);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
 	svc_i3c_master_reset(master);
 
 	/* Register the master */
 	ret = i3c_master_register(&master->base, &pdev->dev,
 				  &svc_i3c_master_ops, false);
 	if (ret)
-		goto err_disable_sclk;
+		goto rpm_disable;
+
+	pm_runtime_mark_last_busy(&pdev->dev);
+	pm_runtime_put_autosuspend(&pdev->dev);
 
 	return 0;
 
+rpm_disable:
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_noidle(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
 err_disable_sclk:
 	clk_disable_unprepare(master->sclk);
 
@@ -1467,13 +1542,57 @@ static int svc_i3c_master_remove(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
+static int __maybe_unused svc_i3c_runtime_suspend(struct device *dev)
+{
+	struct svc_i3c_master *master = dev_get_drvdata(dev);
+
 	clk_disable_unprepare(master->pclk);
 	clk_disable_unprepare(master->fclk);
 	clk_disable_unprepare(master->sclk);
+	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
 }
 
+static int __maybe_unused svc_i3c_runtime_resume(struct device *dev)
+{
+	struct svc_i3c_master *master = dev_get_drvdata(dev);
+	int ret = 0;
+
+	pinctrl_pm_select_default_state(dev);
+	ret = clk_prepare_enable(master->pclk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(master->fclk);
+	if (ret) {
+		clk_disable_unprepare(master->pclk);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(master->sclk);
+	if (ret) {
+		clk_disable_unprepare(master->pclk);
+		clk_disable_unprepare(master->fclk);
+		return ret;
+	}
+
+	return ret;
+}
+
+static const struct dev_pm_ops svc_i3c_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				      pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(svc_i3c_runtime_suspend,
+			   svc_i3c_runtime_resume, NULL)
+};
+
 static const struct of_device_id svc_i3c_master_of_match_tbl[] = {
 	{ .compatible = "silvaco,i3c-master" },
 	{ /* sentinel */ },
@@ -1485,6 +1604,7 @@ static struct platform_driver svc_i3c_master = {
 	.driver = {
 		.name = "silvaco-i3c-master",
 		.of_match_table = svc_i3c_master_of_match_tbl,
+		.pm = &svc_i3c_pm_ops,
 	},
 };
 module_platform_driver(svc_i3c_master);
-- 
2.25.1


-- 
linux-i3c mailing list
linux-i3c@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-i3c

      parent reply	other threads:[~2021-07-16  8:52 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-16  8:53 [PATCH V3 0/5] i3c: master: svc: some bug fixes and add runtime pm support Clark Wang
2021-07-16  8:53 ` [PATCH V3 1/5] i3c: master: svc: move module reset behind clk enable Clark Wang
2021-07-16  8:53 ` [PATCH V3 2/5] i3c: master: svc: fix atomic issue Clark Wang
2021-07-16  8:53 ` [PATCH V3 3/5] i3c: master: svc: add support for slave to stop returning data Clark Wang
2021-07-16  8:53 ` [PATCH V3 4/5] i3c: master: svc: set ODSTOP to let I2C device see the STOP signal Clark Wang
2021-07-16  8:53 ` Clark Wang [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210716085317.3572224-6-xiaoning.wang@nxp.com \
    --to=xiaoning.wang@nxp.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor.culhane@silvaco.com \
    --cc=linux-i3c@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).