From: carlos.song@nxp.com
To: andi.shyti@kernel.org, aisheng.dong@nxp.com, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com
Cc: carlos.song@nxp.com, xiaoning.wang@nxp.com, haibo.chen@nxp.com,
linux-imx@nxp.com, linux-i2c@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] i2c: imx-lpi2c: add generic GPIO recovery for LPI2C
Date: Mon, 26 Feb 2024 13:54:18 +0800 [thread overview]
Message-ID: <20240226055418.3314913-1-carlos.song@nxp.com> (raw)
From: Carlos Song <carlos.song@nxp.com>
This adds i2c bus recovery to the lpi2c driver.
Uses the generic recovery function setting the SCL/SDA pads as
GPIO pins and sending 9 clocks to try and recover the bus.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
---
drivers/i2c/busses/i2c-imx-lpi2c.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index 678b30e90492..6d72e4e126dd 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -106,6 +106,7 @@ struct lpi2c_imx_struct {
unsigned int txfifosize;
unsigned int rxfifosize;
enum lpi2c_imx_mode mode;
+ struct i2c_bus_recovery_info rinfo;
};
static void lpi2c_imx_intctrl(struct lpi2c_imx_struct *lpi2c_imx,
@@ -133,6 +134,8 @@ static int lpi2c_imx_bus_busy(struct lpi2c_imx_struct *lpi2c_imx)
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&lpi2c_imx->adapter.dev, "bus not work\n");
+ if (lpi2c_imx->adapter.bus_recovery_info)
+ i2c_recover_bus(&lpi2c_imx->adapter);
return -ETIMEDOUT;
}
schedule();
@@ -190,6 +193,8 @@ static void lpi2c_imx_stop(struct lpi2c_imx_struct *lpi2c_imx)
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&lpi2c_imx->adapter.dev, "stop timeout\n");
+ if (lpi2c_imx->adapter.bus_recovery_info)
+ i2c_recover_bus(&lpi2c_imx->adapter);
break;
}
schedule();
@@ -325,6 +330,8 @@ static int lpi2c_imx_txfifo_empty(struct lpi2c_imx_struct *lpi2c_imx)
if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
dev_dbg(&lpi2c_imx->adapter.dev, "txfifo empty timeout\n");
+ if (lpi2c_imx->adapter.bus_recovery_info)
+ i2c_recover_bus(&lpi2c_imx->adapter);
return -ETIMEDOUT;
}
schedule();
@@ -526,6 +533,20 @@ static irqreturn_t lpi2c_imx_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static int lpi2c_imx_init_recovery_info(struct lpi2c_imx_struct *lpi2c_imx,
+ struct platform_device *pdev)
+{
+ struct i2c_bus_recovery_info *bri = &lpi2c_imx->rinfo;
+
+ bri->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (IS_ERR(bri->pinctrl))
+ return PTR_ERR(bri->pinctrl);
+
+ lpi2c_imx->adapter.bus_recovery_info = bri;
+
+ return 0;
+}
+
static u32 lpi2c_imx_func(struct i2c_adapter *adapter)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
@@ -600,6 +621,12 @@ static int lpi2c_imx_probe(struct platform_device *pdev)
lpi2c_imx->txfifosize = 1 << (temp & 0x0f);
lpi2c_imx->rxfifosize = 1 << ((temp >> 8) & 0x0f);
+ /* Init optional bus recovery function */
+ ret = lpi2c_imx_init_recovery_info(lpi2c_imx, pdev);
+ /* Give it another chance if pinctrl used is not ready yet */
+ if (ret == -EPROBE_DEFER)
+ goto rpm_disable;
+
ret = i2c_add_adapter(&lpi2c_imx->adapter);
if (ret)
goto rpm_disable;
--
2.34.1
next reply other threads:[~2024-02-26 5:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-26 5:54 carlos.song [this message]
2024-03-01 8:22 ` [PATCH] i2c: imx-lpi2c: add generic GPIO recovery for LPI2C Aisheng Dong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240226055418.3314913-1-carlos.song@nxp.com \
--to=carlos.song@nxp.com \
--cc=aisheng.dong@nxp.com \
--cc=andi.shyti@kernel.org \
--cc=festevam@gmail.com \
--cc=haibo.chen@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=xiaoning.wang@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).