From: Chris Packham <chris.packham@alliedtelesis.co.nz>
To: antoniu.miclaus@analog.com, alexandre.belloni@bootlin.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net
Cc: linux-rtc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: [PATCH v8 0/2] drivers: rtc: add max313xx series rtc driver
Date: Tue, 27 Feb 2024 14:03:08 +1300 [thread overview]
Message-ID: <20240227010312.3305966-1-chris.packham@alliedtelesis.co.nz> (raw)
Datasheets:
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31328.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31329.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31331.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31334.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31341B-MAX31341C.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31342.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/MAX31343.pdf
changelog:
since v7:
- Rename variables and functions to reduce delta with existing max31335
driver
- clean up some sparse warnings
- Keep old dt-binding name
since v6:
- Roll changes into max31335 driver that was landed while this was
in-flight.
- Adjusted code order and variable names to reduce the delta with
the max31335
since v5:
- change of maintainer
- use adi,ti-diode property
- deal with oscillator fail and releasing SWRST
since v4:
- dt-binding: add enum value "2" to aux-voltage-chargable
- dt-binding: remove adi,trickle-diode-enable
- dt-binding: change description of trickle-resistor-ohms
- dt-binding: reorder as in example schema
- parse "wakeup-source" when irq not requested
- remove limitation on max31328 irq and clockout
- remove error and warning messages during trickle charger setup
since v3:
- dt-binding: remove interrupt names.
- dt-binding: add description for "interrupts" property
- dt-binding: replace deprecated property "trickle-diode-disable"
by "aux-voltage-chargeable"
- dt-binding: add new property "adi,trickle-diode-enable"
- dt-binding: remove "wakeup-source"
- use clear_bit instead of __clear_bit
- use devm_of_clk_add_hw_provider instead of of_clk_add_provider
- use chip_desc pointer as driver data instead of enum.
since v2:
- add "break" to fix warning: unannotated fall-through
Reported-by: kernel test robot <lkp@intel.com>
since v1:
- dt-binding: update title and description
- dt-binding: remove last example
- drop watchdog support
- support reading 12Hr format instead of forcing 24hr at probe time
- use "tm_year % 100" instead of range check
- refactor max313xx_init for readability
Ibrahim Tilki (2):
rtc: max31335: Add support for additional chips
dt-bindings: rtc: add max313xx RTCs
.../devicetree/bindings/rtc/adi,max31335.yaml | 88 +-
drivers/rtc/Kconfig | 2 +-
drivers/rtc/rtc-max31335.c | 969 +++++++++++++-----
3 files changed, 779 insertions(+), 280 deletions(-)
--
2.43.2
next reply other threads:[~2024-02-27 1:03 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-27 1:03 Chris Packham [this message]
2024-02-27 1:03 ` [PATCH v8 1/2] rtc: max31335: Add support for additional chips Chris Packham
2024-02-27 2:29 ` Alexandre Belloni
2024-02-27 4:22 ` Chris Packham
2024-02-27 1:03 ` [PATCH v8 2/2] dt-bindings: rtc: add max313xx RTCs Chris Packham
2024-02-28 11:58 ` Conor Dooley
2024-02-28 20:21 ` Chris Packham
2024-02-29 18:07 ` Conor Dooley
2024-02-29 20:11 ` Chris Packham
2024-02-29 20:29 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240227010312.3305966-1-chris.packham@alliedtelesis.co.nz \
--to=chris.packham@alliedtelesis.co.nz \
--cc=alexandre.belloni@bootlin.com \
--cc=antoniu.miclaus@analog.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).