From: Saran Neti <sarannmr@gmail.com>
To: linux-hotplug@vger.kernel.org
Subject: Kernel BUG() in block/blk-tag.c:89 causing panic.
Date: Thu, 19 Jun 2014 04:42:51 +0000 [thread overview]
Message-ID: <CAE6A3M1pvsHYAH4XVDpBJqVodrc-yJ-mtKRz98UsnwB2yWScRw@mail.gmail.com> (raw)
Hi,
I have a many identical looking USB drives in two btrfs multi-device
configurations. I was unplugging and replugging a few devices to
identify which physical device belonged to which btrfs filesystem.
Running "btrfs fi show" during this unplugging/replugging business
produced the BUG() stack trace shown below. "btrfs fi show" wouldn't
return and neither would "fdisk -l". When I tried to reboot the
computer, it panicked forcing me to do a hard reset.
All hard disks are run-of-the-mill Seagate Expansion or Backup Plus
drives. They all work fine (data and SMART) when kernel
detects them at the start. I hit the BUG() twice during
unplugging/replugging them randomly and I think it could've been when
I swapped USB ports for identical drives (model/version etc.)
If more lspci/lsusb information if needed, let me know. I should be
able to reproduce it again and if needed insert printks and debug on
mainline.
# uname -a
Linux godel 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014
x86_64 GNU/Linux
------------[ cut here ]------------
kernel BUG at block/blk-tag.c:89!
invalid opcode: 0000 [#1] PREEMPT SMP
Modules linked in: bridge stp llc tun nct6775 hwmon_vid hid_microsoft
uas usb_storage joydev hid_generic ir_lirc_codec mousedev lirc_dev
ir_mce_kbd_decoder ir_sharp_decoder ir_sanyo_decoder ir_sony_decoder
ir_jvc_decoder ir_rc6_decoder ir_rc5_decoder ir_nec_decoder rc_rc6_mce
usbhid mceusb rc_core hid snd_hda_codec_hdmi coretemp hwmon
x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm iTCO_wdt
iTCO_vendor_support ppdev mxm_wmi evdev mac_hid ext4 crc16 mbcache
jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cryptd
microcode snd_hda_codec_realtek i915 snd_hda_codec_generic psmouse
serio_raw pcspkr snd_hda_intel snd_hda_controller drm_kms_helper drm
snd_hda_codec snd_hwdep parport_pc i2c_i801 snd_pcm lpc_ich r8169 mii
parport mei_me thermal fan wmi battery tpm_infineon tpm_tis tpm
mei snd_timer video shpchp intel_gtt snd i2c_algo_bit button i2c_core
soundcore processor btrfs xor atkbd libps2 c
rc32c_intel ehci_pci ehci_hcd xhci_hcd usbcore usb_common raid6_pq
i8042 serio sd_mod crc_t10dif crct10dif_common ahci libahci libata
scsi_mod
CPU: 0 PID: 821 Comm: systemd-udevd Not tainted 3.15.1-1-ARCH #1
Hardware name: MSI MS-7850/Z87-G41 PC Mate(MS-7850), BIOS V1.6 02/21/2014
task: ffff88020a369460 ti: ffff8801f4ff8000 task.ti: ffff8801f4ff8000
RIP: 0010:[<ffffffff8126b188>] [<ffffffff8126b188>] blk_free_tags+0x18/0x20
RSP: 0018:ffff8801f4ffbbb0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8801f2845000 RCX: 0000000000340780
RDX: 0000000000000000 RSI: ffff880037d1a600 RDI: ffff8802112a3a00
RBP: ffff8801f4ffbbb0 R08: 000000000001b760 R09: ffff880214873800
R10: ffff88021fa1b760 R11: ffffea0000df4680 R12: ffff88020629f030
R13: ffff8800b65ca480 R14: ffff8801f28451a0 R15: ffff8800b65c4120
FS: 00007f4256c9f7c0(0000) GS:ffff88021fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2ba863e038 CR3: 00000001f4fe0000 CR4: 00000000000407f0
Stack:
ffff8801f4ffbbd8 ffffffffa0003230 ffff8801f28451a0 ffff8801f2845190
ffff8800b65ca480 ffff8801f4ffbc00 ffffffff8138c552 ffff8801f28451d8
ffffffff8189e2c0 ffff8802106f8ac0 ffff8801f4ffbc30 ffffffff8129466a
Call Trace:
[<ffffffffa0003230>] scsi_host_dev_release+0xb0/0xf0 [scsi_mod]
[<ffffffff8138c552>] device_release+0x32/0xa0
[<ffffffff8129466a>] kobject_release+0x7a/0x1c0
[<ffffffff812947dd>] kobject_put+0x2d/0x60
[<ffffffff8138c997>] put_device+0x17/0x20
[<ffffffffa000af7f>] scsi_target_dev_release+0x1f/0x30 [scsi_mod]
[<ffffffff8138c552>] device_release+0x32/0xa0
[<ffffffff8129466a>] kobject_release+0x7a/0x1c0
[<ffffffff812947dd>] kobject_put+0x2d/0x60
[<ffffffff8138c997>] put_device+0x17/0x20
[<ffffffffa000e435>] scsi_device_dev_release_usercontext+0x195/0x1a0 [scsi_mod]
[<ffffffff81085257>] execute_in_process_context+0x67/0x70
[<ffffffffa000e29c>] scsi_device_dev_release+0x1c/0x20 [scsi_mod]
[<ffffffff8138c552>] device_release+0x32/0xa0
[<ffffffff8129466a>] kobject_release+0x7a/0x1c0
[<ffffffff812947dd>] kobject_put+0x2d/0x60
[<ffffffff8138c997>] put_device+0x17/0x20
[<ffffffffa000180a>] scsi_device_put+0x3a/0x50 [scsi_mod]
[<ffffffffa00a4810>] scsi_disk_put+0x30/0x50 [sd_mod]
[<ffffffffa00a5821>] sd_release+0x31/0x70 [sd_mod]
[<ffffffff811ef642>] __blkdev_put+0x182/0x1c0
[<ffffffff811f000c>] blkdev_put+0x4c/0x150
[<ffffffff811f01c5>] blkdev_close+0x25/0x30
[<ffffffff811b609c>] __fput+0x9c/0x200
[<ffffffff811b624e>] ____fput+0xe/0x10
[<ffffffff8108a35f>] task_work_run+0x9f/0xe0
[<ffffffff81014c55>] do_notify_resume+0x95/0xa0
[<ffffffff81515be0>] int_signal+0x12/0x17
Code: c3 66 90 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f
44 00 00 55 48 89 e5 e8 82 ff ff ff 85 c0 74 0
6 5d c3 0f 1f 40 00 <0f> 0b 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89
e5 53 48 89 fb
RIP [<ffffffff8126b188>] blk_free_tags+0x18/0x20
RSP <ffff8801f4ffbbb0>
---[ end trace bc3cb23eb685d10a ]---
systemd-udevd[185]: worker [821] terminated by signal 11 (Segmentation fault)
--
Saran
next reply other threads:[~2014-06-19 4:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-19 4:42 Saran Neti [this message]
2014-06-19 4:49 ` Kernel BUG() in block/blk-tag.c:89 causing panic Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAE6A3M1pvsHYAH4XVDpBJqVodrc-yJ-mtKRz98UsnwB2yWScRw@mail.gmail.com \
--to=sarannmr@gmail.com \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).