From: Josh Boyer <jwboyer@kernel.org>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Mario Limonciello <superm1@gmail.com>, linux-firmware@kernel.org
Subject: Re: [PATCH linux-firmware] brcm: Add nvram for the Asus Memo Pad 7 ME176C tablet
Date: Mon, 19 Feb 2024 07:47:43 -0500 [thread overview]
Message-ID: <CA+5PVA5wVYM6VAmGpj0s_MqRQXA2+zF90d_bGZs6wC_AhfrpmA@mail.gmail.com> (raw)
In-Reply-To: <20240216111720.105373-1-hdegoede@redhat.com>
On Fri, Feb 16, 2024 at 6:17 AM Hans de Goede <hdegoede@redhat.com> wrote:
>
> Add a NVRAM file for the brcmfmac43362 wifi/bt chip found on the Asus
> Memo Pad 7 ME176C tablet. This is based on copy of the existing
> brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt file with some
> of the values adjusted for the Asus Memo Pad 7 ME176C tablet.
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Applied and pushed out.
https://gitlab.com/kernel-firmware/linux-firmware/-/merge_requests/154
josh
> ---
> WHENCE | 1 +
> ...3362-sdio.ASUSTeK COMPUTER INC.-ME176C.txt | 63 +++++++++++++++++++
> 2 files changed, 64 insertions(+)
> create mode 100644 brcm/brcmfmac43362-sdio.ASUSTeK COMPUTER INC.-ME176C.txt
>
> diff --git a/WHENCE b/WHENCE
> index d9bed25d..ba9baa17 100644
> --- a/WHENCE
> +++ b/WHENCE
> @@ -2838,6 +2838,7 @@ File: "brcm/brcmfmac43340-sdio.ASUSTeK COMPUTER INC.-TF103CE.txt"
> File: "brcm/brcmfmac43340-sdio.meegopad-t08.txt"
> File: "brcm/brcmfmac43340-sdio.pov-tab-p1006w-data.txt"
> File: "brcm/brcmfmac43340-sdio.predia-basic.txt"
> +File: "brcm/brcmfmac43362-sdio.ASUSTeK COMPUTER INC.-ME176C.txt"
> File: "brcm/brcmfmac43362-sdio.WC121.txt"
> File: "brcm/brcmfmac43362-sdio.cubietech,cubietruck.txt"
> Link: brcm/brcmfmac43362-sdio.kobo,aura.txt -> brcmfmac43362-sdio.WC121.txt
> diff --git a/brcm/brcmfmac43362-sdio.ASUSTeK COMPUTER INC.-ME176C.txt b/brcm/brcmfmac43362-sdio.ASUSTeK COMPUTER INC.-ME176C.txt
> new file mode 100644
> index 00000000..0d05d420
> --- /dev/null
> +++ b/brcm/brcmfmac43362-sdio.ASUSTeK COMPUTER INC.-ME176C.txt
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +# (C) Copyright 2018 Linaro Ltd
> +# NVRAM config file for the Ampak AP6476A 43362 WiFi/BT module found on the
> +# Asus Memo Pad 7 ME176C tablet
> +aa2g=1
> +ag0=2
> +boardflags2=0x80
> +boardflags=0x80201
> +boardnum=777
> +boardrev=0x1207
> +boardtype=0x0598
> +btc_flags=0x7
> +btc_params0=5000
> +btc_params1=1000
> +btc_params6=63
> +cck2gpo=0x2222
> +cckPwrIdxCorr=-8
> +cckPwrOffset=4
> +ccode=X2
> +devid=0x4343
> +edoffthd=-71
> +edonthd=-65
> +initxidx2g=45
> +logen_mode=0x0,0x02,0x1b,0x0,0x1b
> +macaddr=00:90:4c:c5:12:38
> +manfid=0x2d0
> +maxp2ga0=74
> +mcs2gpo0=0x8888
> +mcs2gpo1=0x8888
> +noise_cal_dbg.fab.3=1
> +noise_cal_enable_2g=0
> +noise_cal_high_gain.fab.3=76
> +noise_cal_nf_substract_val.fab.3=356
> +noise_cal_po_2g.fab.3=4
> +noise_cal_po_2g=4
> +ofdm2gpo=0x66666666
> +ofdmdigfilttype=4
> +pa0b0=0x12AD
> +pa0b1=0xFDE2
> +pa0b2=0xFF71
> +pa0itssit=62
> +pa0maxpwr=80
> +pa1itssit=62
> +prodid=0x492
> +rfreg033=0x19
> +rfreg033_cck=0x1f
> +rssisav2g=0x7
> +rssismc2g=0x3
> +rssismf2g=0xa
> +sd_gpout=1
> +sd_gpval=0
> +sd_oobonly=0
> +spuravoid_enable2g=1
> +sromrev=3
> +swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
> +temp_add=29767
> +temp_mult=425
> +temp_q=10
> +triso2g=0
> +tssitime=1
> +vendid=0x14e4
> +wl0id=0x431b
> +xtalfreq=26000
> --
> 2.43.0
>
prev parent reply other threads:[~2024-02-19 12:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-16 11:17 [PATCH linux-firmware] brcm: Add nvram for the Asus Memo Pad 7 ME176C tablet Hans de Goede
2024-02-19 12:47 ` Josh Boyer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CA+5PVA5wVYM6VAmGpj0s_MqRQXA2+zF90d_bGZs6wC_AhfrpmA@mail.gmail.com \
--to=jwboyer@kernel.org \
--cc=hdegoede@redhat.com \
--cc=linux-firmware@kernel.org \
--cc=superm1@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).