Linux-Devicetree Archive mirror
 help / color / mirror / Atom feed
From: Hongxing Zhu <hongxing.zhu@nxp.com>
To: Conor Dooley <conor@kernel.org>
Cc: "vkoul@kernel.org" <vkoul@kernel.org>,
	"kishon@kernel.org" <kishon@kernel.org>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"krzysztof.kozlowski+dt@linaro.org"
	<krzysztof.kozlowski+dt@linaro.org>, Frank Li <frank.li@nxp.com>,
	"conor+dt@kernel.org" <conor+dt@kernel.org>,
	"linux-phy@lists.infradead.org" <linux-phy@lists.infradead.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"kernel@pengutronix.de" <kernel@pengutronix.de>,
	"imx@lists.linux.dev" <imx@lists.linux.dev>
Subject: RE: [PATCH v5 1/2] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding
Date: Tue, 14 May 2024 01:54:39 +0000	[thread overview]
Message-ID: <AS8PR04MB86760A3E903013C0AEFE9E958CE32@AS8PR04MB8676.eurprd04.prod.outlook.com> (raw)
In-Reply-To: <20240513-antonym-flanking-5a812dd49920@spud>

> -----Original Message-----
> From: Conor Dooley <conor@kernel.org>
> Sent: 2024年5月14日 0:02
> To: Hongxing Zhu <hongxing.zhu@nxp.com>
> Cc: vkoul@kernel.org; kishon@kernel.org; robh+dt@kernel.org;
> krzysztof.kozlowski+dt@linaro.org; Frank Li <frank.li@nxp.com>;
> conor+dt@kernel.org; linux-phy@lists.infradead.org; devicetree@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> kernel@pengutronix.de; imx@lists.linux.dev
> Subject: Re: [PATCH v5 1/2] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY
> binding
> 
> On Mon, May 13, 2024 at 09:22:03AM +0800, Richard Zhu wrote:
> 
> > +  fsl,hsio-cfg:
> > +    description:
> > +      Specifies the use case of the HSIO module in the hardware design.
> > +      Because the HSIO module can be configure into three different use
> > +      cases.
> > +      Refer to macro HSIO_CFG* of
> include/dt-bindings/phy/phy-imx8-pcie.h.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    maximum: 3
> 
> > +/*
> > + * Regarding the design of i.MX8QM HSIO subsystem, HSIO module can be
> > + * confiured as following three use cases.
> > + *
> > + * Define different configurations refer to the use cases, since it
> > +is
> > + * mandatory required in the initialization.
> > + *
> > + * On i.MX8QXP, HSIO module only has PCIEB and one lane PHY.
> > + * Define "IMX8Q_HSIO_CFG_PCIEB" for i.MX8QXP platforms.
> > + *
> > + * +----------------------------------------------------+----------+
> > + * |                               | i.MX8QM            | i.MX8QXP
> |
> > + * |-------------------------------|--------------------|----------|
> > + * |                               | Lane0| Lane1| Lane2| Lane0    |
> > + * |-------------------------------|------|------|------|----------|
> > + * | IMX8Q_HSIO_CFG_PCIEAX2SATA    | PCIEA| PCIEA| SATA |
> |
> > + * |-------------------------------|------|------|------|----------|
> > + * | IMX8Q_HSIO_CFG_PCIEAX2PCIEB   | PCIEA| PCIEA| PCIEB|
> |
> > + * |-------------------------------|------|------|------|----------|
> > + * | IMX8Q_HSIO_CFG_PCIEAPCIEBSATA | PCIEA| PCIEB| SATA |          |
> > + * |-------------------------------|------|------|------|----------|
> > + * | IMX8Q_HSIO_CFG_PCIEB          | -    | -    | -    | PCIEB    |
> > + * +----------------------------------------------------+----------+
> > + */
> > +#define IMX8Q_HSIO_CFG_PCIEAX2SATA	0x1
> > +#define IMX8Q_HSIO_CFG_PCIEAX2PCIEB	0x2
> > +#define IMX8Q_HSIO_CFG_PCIEAPCIEBSATA
> 	(IMX8Q_HSIO_CFG_PCIEAX2SATA | IMX8Q_HSIO_CFG_PCIEAX2PCIEB)
> > +#define IMX8Q_HSIO_CFG_PCIEB		IMX8Q_HSIO_CFG_PCIEAX2PCIEB
> 
> Rob may disagree with me, but I think this should be an enum of possible strings
> with the table here moved into the property description. The QXP only option
> should then be constrained per compatible.
> 
If this property is an enum of possible strings. There would be three if()
 checks to parse the possible string in driver.
I'm fine with that.

Hi Rob:
How do you think about that?
> > +
> > +  fsl,refclk-pad-mode:
> > +    description:
> > +      Specifies the mode of the refclk pad used. INPUT(PHY refclock is
> > +      provided externally via the refclk pad) or OUTPUT(PHY refclock is
> > +      derived from SoC internal source and provided on the refclk pad).
> 
> > +      This property not exsit means unused(PHY refclock is derived
> > + from
> 
> Please run a spell checker on your patches.
> 
Sorry, It's my fault. There is a spell mistake.
s/exsit/exists/
Thanks.
> > +      SoC internal source).
> 
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    enum: [ input, output ]
> 
> enum: [input, output, unused]
> default: unused
Okay

Best Regards
Richard
> 
> Cheers,
> Conor.

  reply	other threads:[~2024-05-14  1:54 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-13  1:22 [PATCH v5 0/2] Add i.MX8Q HSIO PHY support Richard Zhu
2024-05-13  1:22 ` [PATCH v5 1/2] dt-bindings: phy: Add i.MX8Q HSIO SerDes PHY binding Richard Zhu
2024-05-13 16:01   ` Conor Dooley
2024-05-14  1:54     ` Hongxing Zhu [this message]
2024-05-13  1:22 ` [PATCH v5 2/2] phy: freescale: imx8qm-hsio: Add i.MX8QM HSIO PHY driver support Richard Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=AS8PR04MB86760A3E903013C0AEFE9E958CE32@AS8PR04MB8676.eurprd04.prod.outlook.com \
    --to=hongxing.zhu@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=frank.li@nxp.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=kishon@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).