From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>, Conor Dooley <conor+dt@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Rob Herring <robh@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
kernel@dh-electronics.com, linux-kernel@vger.kernel.org
Subject: [PATCH] arm64: dts: imx8mp: Enable HDMI on i.MX8MP DHCOM PDK2 and PDK3
Date: Tue, 14 May 2024 03:06:42 +0200 [thread overview]
Message-ID: <20240514010706.245874-1-marex@denx.de> (raw)
Enable HDMI output on i.MX8MP DHCOM PDK2 and PDK3. The I2C5 on PDK2 and
I2C mux port 1 on PDK3 respectively are used in regular I2C mode instead
of HDMI DDC mode to permit connection of other I2C devices on those buses.
The pinctrl_hdmi node is part of the SoM DTSI already.
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: imx@lists.linux.dev
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
.../boot/dts/freescale/imx8mp-dhcom-pdk2.dts | 39 +++++++++++++++++++
.../boot/dts/freescale/imx8mp-dhcom-pdk3.dts | 39 +++++++++++++++++++
2 files changed, 78 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
index 3b1c940860e02..ebdf13e97b4e2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk2.dts
@@ -69,6 +69,18 @@ button-3 {
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "X38";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
led {
compatible = "gpio-leds";
@@ -184,6 +196,33 @@ &flexcan1 {
status = "okay";
};
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ ddc-i2c-bus = <&i2c5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
&pcie_phy {
clock-names = "ref";
clocks = <&hsio_blk_ctrl>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
index ac7ec7533a3c8..ef012e8365b1f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-pdk3.dts
@@ -75,6 +75,18 @@ button-3 {
};
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ label = "X28";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+ };
+
led {
compatible = "gpio-leds";
@@ -248,6 +260,33 @@ &flexcan1 {
status = "okay";
};
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ ddc-i2c-bus = <&i2cmuxed1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ status = "okay";
+
+ ports {
+ port@1 {
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
&pcie_phy {
clocks = <&pcieclk 1>;
clock-names = "ref";
--
2.43.0
next reply other threads:[~2024-05-14 1:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-14 1:06 Marek Vasut [this message]
2024-05-14 12:53 ` [PATCH] arm64: dts: imx8mp: Enable HDMI on i.MX8MP DHCOM PDK2 and PDK3 Rob Herring (Arm)
2024-05-14 22:18 ` Marek Vasut
2024-05-16 8:00 ` Francesco Dolcini
2024-05-16 11:14 ` Marek Vasut
2024-05-16 11:36 ` Ahmad Fatoum
2024-05-16 11:44 ` Marek Vasut
2024-05-16 11:46 ` Ahmad Fatoum
2024-05-16 12:07 ` Alexander Stein
2024-05-16 11:57 ` Francesco Dolcini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240514010706.245874-1-marex@denx.de \
--to=marex@denx.de \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@dh-electronics.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).