From: Dmitry Rokosov <ddrokosov@salutedevices.com>
To: <neil.armstrong@linaro.org>, <jbrunet@baylibre.com>,
<mturquette@baylibre.com>, <sboyd@kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<khilman@baylibre.com>, <martin.blumenstingl@googlemail.com>
Cc: <jian.hu@amlogic.com>, <kernel@sberdevices.ru>,
<rockosov@gmail.com>, <linux-amlogic@lists.infradead.org>,
<linux-clk@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Dmitry Rokosov <ddrokosov@salutedevices.com>
Subject: [PATCH v2 3/7] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock
Date: Fri, 10 May 2024 12:08:55 +0300 [thread overview]
Message-ID: <20240510090933.19464-4-ddrokosov@salutedevices.com> (raw)
In-Reply-To: <20240510090933.19464-1-ddrokosov@salutedevices.com>
The 'syspll' PLL, also known as the system PLL, is a general and
essential PLL responsible for generating the CPU clock frequency.
With its wide-ranging capabilities, it is designed to accommodate
frequencies within the range of 768MHz to 1536MHz.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
---
drivers/clk/meson/a1-pll.c | 79 ++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/a1-pll.h | 6 +++
2 files changed, 85 insertions(+)
diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c
index 60b2e53e7e51..af47ba308bbe 100644
--- a/drivers/clk/meson/a1-pll.c
+++ b/drivers/clk/meson/a1-pll.c
@@ -138,6 +138,82 @@ static struct clk_regmap hifi_pll = {
},
};
+static const struct pll_mult_range sys_pll_mult_range = {
+ .min = 32,
+ .max = 64,
+};
+
+static const struct reg_sequence sys_pll_init_regs[] = {
+ { .reg = ANACTRL_SYSPLL_CTRL1, .def = 0x01800000 },
+ { .reg = ANACTRL_SYSPLL_CTRL2, .def = 0x00001100 },
+ { .reg = ANACTRL_SYSPLL_CTRL3, .def = 0x10022300 },
+ { .reg = ANACTRL_SYSPLL_CTRL4, .def = 0x00300000 },
+ { .reg = ANACTRL_SYSPLL_CTRL0, .def = 0x01f18432 },
+};
+
+static struct clk_regmap sys_pll = {
+ .data = &(struct meson_clk_pll_data){
+ .en = {
+ .reg_off = ANACTRL_SYSPLL_CTRL0,
+ .shift = 28,
+ .width = 1,
+ },
+ .m = {
+ .reg_off = ANACTRL_SYSPLL_CTRL0,
+ .shift = 0,
+ .width = 8,
+ },
+ .n = {
+ .reg_off = ANACTRL_SYSPLL_CTRL0,
+ .shift = 10,
+ .width = 5,
+ },
+ .frac = {
+ .reg_off = ANACTRL_SYSPLL_CTRL1,
+ .shift = 0,
+ .width = 19,
+ },
+ .l = {
+ .reg_off = ANACTRL_SYSPLL_STS,
+ .shift = 31,
+ .width = 1,
+ },
+ .current_en = {
+ .reg_off = ANACTRL_SYSPLL_CTRL0,
+ .shift = 26,
+ .width = 1,
+ },
+ .l_detect = {
+ .reg_off = ANACTRL_SYSPLL_CTRL2,
+ .shift = 6,
+ .width = 1,
+ },
+ .range = &sys_pll_mult_range,
+ .init_regs = sys_pll_init_regs,
+ .init_count = ARRAY_SIZE(sys_pll_init_regs),
+ .flags = CLK_MESON_PLL_INIT_ONCE,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_pll",
+ .ops = &meson_clk_pll_ops,
+ .parent_names = (const char *[]){ "syspll_in" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_fixed_factor sys_pll_div16 = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_pll_div16",
+ .ops = &clk_fixed_factor_ops,
+ .parent_hws = (const struct clk_hw *[]) {
+ &sys_pll.hw
+ },
+ .num_parents = 1,
+ },
+};
+
static struct clk_fixed_factor fclk_div2_div = {
.mult = 1,
.div = 2,
@@ -283,6 +359,8 @@ static struct clk_hw *a1_pll_hw_clks[] = {
[CLKID_FCLK_DIV5] = &fclk_div5.hw,
[CLKID_FCLK_DIV7] = &fclk_div7.hw,
[CLKID_HIFI_PLL] = &hifi_pll.hw,
+ [CLKID_SYS_PLL] = &sys_pll.hw,
+ [CLKID_SYS_PLL_DIV16] = &sys_pll_div16.hw,
};
static struct clk_regmap *const a1_pll_regmaps[] = {
@@ -293,6 +371,7 @@ static struct clk_regmap *const a1_pll_regmaps[] = {
&fclk_div5,
&fclk_div7,
&hifi_pll,
+ &sys_pll,
};
static struct regmap_config a1_pll_regmap_cfg = {
diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h
index 4be17b2bf383..666d9b2137e9 100644
--- a/drivers/clk/meson/a1-pll.h
+++ b/drivers/clk/meson/a1-pll.h
@@ -18,6 +18,12 @@
#define ANACTRL_FIXPLL_CTRL0 0x0
#define ANACTRL_FIXPLL_CTRL1 0x4
#define ANACTRL_FIXPLL_STS 0x14
+#define ANACTRL_SYSPLL_CTRL0 0x80
+#define ANACTRL_SYSPLL_CTRL1 0x84
+#define ANACTRL_SYSPLL_CTRL2 0x88
+#define ANACTRL_SYSPLL_CTRL3 0x8c
+#define ANACTRL_SYSPLL_CTRL4 0x90
+#define ANACTRL_SYSPLL_STS 0x94
#define ANACTRL_HIFIPLL_CTRL0 0xc0
#define ANACTRL_HIFIPLL_CTRL1 0xc4
#define ANACTRL_HIFIPLL_CTRL2 0xc8
--
2.43.0
next prev parent reply other threads:[~2024-05-10 9:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-10 9:08 [PATCH v2 0/7] clk: meson: introduce Amlogic A1 SoC Family CPU clock controller driver Dmitry Rokosov
2024-05-10 9:08 ` [PATCH v2 1/7] clk: meson: introduce 'INIT_ONCE' flag to eliminate init for enabled PLL Dmitry Rokosov
2024-05-13 12:44 ` Jerome Brunet
2024-05-13 21:47 ` Dmitry Rokosov
2024-05-15 13:12 ` Jerome Brunet
2024-05-10 9:08 ` [PATCH v2 2/7] dt-bindings: clock: meson: a1: pll: introduce new syspll bindings Dmitry Rokosov
2024-05-11 13:08 ` Conor Dooley
2024-05-13 9:18 ` Dmitry Rokosov
2024-05-13 15:48 ` Conor Dooley
2024-05-13 18:30 ` Dmitry Rokosov
2024-05-15 13:15 ` Jerome Brunet
2024-05-13 12:04 ` Jerome Brunet
2024-05-13 15:42 ` Conor Dooley
2024-05-10 9:08 ` Dmitry Rokosov [this message]
2024-05-13 12:48 ` [PATCH v2 3/7] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock Jerome Brunet
2024-05-13 21:25 ` Dmitry Rokosov
2024-05-10 9:08 ` [PATCH v2 4/7] dt-bindings: clock: meson: a1: peripherals: support sys_pll_div16 input Dmitry Rokosov
2024-05-11 13:03 ` Conor Dooley
2024-05-13 12:02 ` Jerome Brunet
2024-05-10 9:08 ` [PATCH v2 5/7] clk: meson: a1: peripherals: support 'sys_pll_div16' clock as GEN input Dmitry Rokosov
2024-05-10 9:08 ` [PATCH v2 6/7] dt-bindings: clock: meson: add A1 CPU clock controller bindings Dmitry Rokosov
2024-05-10 9:08 ` [PATCH v2 7/7] clk: meson: a1: add Amlogic A1 CPU clock controller driver Dmitry Rokosov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240510090933.19464-4-ddrokosov@salutedevices.com \
--to=ddrokosov@salutedevices.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=jian.hu@amlogic.com \
--cc=kernel@sberdevices.ru \
--cc=khilman@baylibre.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=robh+dt@kernel.org \
--cc=rockosov@gmail.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).