* [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
@ 2024-01-11 10:11 Neeraj Sanjay Kale
0 siblings, 0 replies; 13+ messages in thread
From: Neeraj Sanjay Kale @ 2024-01-11 10:11 UTC (permalink / raw
To: marcel, johan.hedberg, luiz.dentz
Cc: amitkumar.karwar, neeraj.sanjaykale, linux-bluetooth,
linux-kernel, sherry.sun, rohit.fule
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")
With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.
User can disable this feature using the following vendor
command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
v2: Corrected subject line. Added commit reference. (Paul Menzel)
drivers/bluetooth/btnxpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 7f88b6f52f26..42e929f0d141 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
/* Default configurations */
#define DEFAULT_H2C_WAKEUP_MODE WAKEUP_METHOD_BREAK
-#define DEFAULT_PS_MODE PS_MODE_DISABLE
+#define DEFAULT_PS_MODE PS_MODE_ENABLE
#define FW_INIT_BAUDRATE HCI_NXP_PRI_BAUDRATE
static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
@ 2024-03-04 17:07 Neeraj Sanjay Kale
2024-03-04 17:56 ` [v2] " bluez.test.bot
2024-03-04 19:29 ` [PATCH v2] " Francesco Dolcini
0 siblings, 2 replies; 13+ messages in thread
From: Neeraj Sanjay Kale @ 2024-03-04 17:07 UTC (permalink / raw
To: marcel, johan.hedberg, luiz.dentz
Cc: amitkumar.karwar, rohit.fule, sherry.sun, neeraj.sanjaykale,
linux-kernel, linux-bluetooth
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")
With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.
User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
v2: Corrected subject line. Added commit reference. (Paul Menzel)
drivers/bluetooth/btnxpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 7f88b6f52f26..42e929f0d141 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
/* Default configurations */
#define DEFAULT_H2C_WAKEUP_MODE WAKEUP_METHOD_BREAK
-#define DEFAULT_PS_MODE PS_MODE_DISABLE
+#define DEFAULT_PS_MODE PS_MODE_ENABLE
#define FW_INIT_BAUDRATE HCI_NXP_PRI_BAUDRATE
static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* RE: [v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
2024-03-04 17:07 [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup Neeraj Sanjay Kale
@ 2024-03-04 17:56 ` bluez.test.bot
2024-03-04 19:29 ` [PATCH v2] " Francesco Dolcini
1 sibling, 0 replies; 13+ messages in thread
From: bluez.test.bot @ 2024-03-04 17:56 UTC (permalink / raw
To: linux-bluetooth, neeraj.sanjaykale
[-- Attachment #1: Type: text/plain, Size: 1694 bytes --]
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=832171
---Test result---
Test Summary:
CheckPatch PASS 0.62 seconds
GitLint PASS 0.29 seconds
SubjectPrefix PASS 0.10 seconds
BuildKernel PASS 28.12 seconds
CheckAllWarning PASS 31.50 seconds
CheckSparse PASS 36.84 seconds
CheckSmatch PASS 101.40 seconds
BuildKernel32 PASS 27.66 seconds
TestRunnerSetup PASS 508.70 seconds
TestRunner_l2cap-tester PASS 20.25 seconds
TestRunner_iso-tester PASS 32.80 seconds
TestRunner_bnep-tester PASS 4.75 seconds
TestRunner_mgmt-tester PASS 113.13 seconds
TestRunner_rfcomm-tester PASS 7.40 seconds
TestRunner_sco-tester PASS 14.92 seconds
TestRunner_ioctl-tester PASS 7.85 seconds
TestRunner_mesh-tester FAIL 6.11 seconds
TestRunner_smp-tester PASS 6.91 seconds
TestRunner_userchan-tester PASS 5.01 seconds
IncrementalBuild PASS 26.54 seconds
Details
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 9 (90.0%), Failed: 1, Not Run: 0
Failed Test Cases
Mesh - Send cancel - 1 Failed 0.104 seconds
---
Regards,
Linux Bluetooth
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
2024-03-04 17:07 [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup Neeraj Sanjay Kale
2024-03-04 17:56 ` [v2] " bluez.test.bot
@ 2024-03-04 19:29 ` Francesco Dolcini
2024-03-15 13:13 ` Neeraj Sanjay Kale
1 sibling, 1 reply; 13+ messages in thread
From: Francesco Dolcini @ 2024-03-04 19:29 UTC (permalink / raw
To: Neeraj Sanjay Kale
Cc: marcel, johan.hedberg, luiz.dentz, amitkumar.karwar, rohit.fule,
sherry.sun, linux-kernel, linux-bluetooth
On Mon, Mar 04, 2024 at 10:37:53PM +0530, Neeraj Sanjay Kale wrote:
> This sets the default power save mode setting to enabled.
>
> The power save feature is now stable and stress test issues, such as the
> TX timeout error, have been resolved.
I assume that the stability issue has been fixed in firmware, correct?
What's going to happen if running the updated driver with old firmware?
What about combo Wi-Fi/BT firmware files, were those updated? I'm
currently using this driver with this firmware [1]
[1] https://github.com/nxp-imx/imx-firmware/blob/lf-5.15.52_2.1.0/nxp/FwImage_IW416_SD/sdiouartiw416_combo_v0.bin
Francesco
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
2024-03-04 19:29 ` [PATCH v2] " Francesco Dolcini
@ 2024-03-15 13:13 ` Neeraj Sanjay Kale
2024-03-15 15:42 ` Francesco Dolcini
0 siblings, 1 reply; 13+ messages in thread
From: Neeraj Sanjay Kale @ 2024-03-15 13:13 UTC (permalink / raw
To: Francesco Dolcini
Cc: marcel@holtmann.org, johan.hedberg@gmail.com,
luiz.dentz@gmail.com, Amitkumar Karwar, Rohit Fule, Sherry Sun,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
Geetu Naagar
Hi Francesco,
>
> On Mon, Mar 04, 2024 at 10:37:53PM +0530, Neeraj Sanjay Kale wrote:
> > This sets the default power save mode setting to enabled.
> >
> > The power save feature is now stable and stress test issues, such as
> > the TX timeout error, have been resolved.
>
> I assume that the stability issue has been fixed in firmware, correct?
> What's going to happen if running the updated driver with old firmware?
> What about combo Wi-Fi/BT firmware files, were those updated? I'm
> currently using this driver with this firmware [1]
There were some stability issues in the driver, that are fixed in previous patches.
As for FW, I have checked internally and there were no power save related issues reported for any combo FWs.
I had requested our QA team to perform basic sanity tests for WLAN and BT using the exact FW version you are using, and there were no power save issues reported.
Thanks,
Neeraj
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
2024-03-15 13:13 ` Neeraj Sanjay Kale
@ 2024-03-15 15:42 ` Francesco Dolcini
2024-05-10 10:18 ` Neeraj Sanjay Kale
0 siblings, 1 reply; 13+ messages in thread
From: Francesco Dolcini @ 2024-03-15 15:42 UTC (permalink / raw
To: Neeraj Sanjay Kale
Cc: Francesco Dolcini, marcel@holtmann.org, johan.hedberg@gmail.com,
luiz.dentz@gmail.com, Amitkumar Karwar, Rohit Fule, Sherry Sun,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
Geetu Naagar
Hello,
On Fri, Mar 15, 2024 at 01:13:36PM +0000, Neeraj Sanjay Kale wrote:
> > On Mon, Mar 04, 2024 at 10:37:53PM +0530, Neeraj Sanjay Kale wrote:
> > > This sets the default power save mode setting to enabled.
> > >
> > > The power save feature is now stable and stress test issues, such as
> > > the TX timeout error, have been resolved.
> >
> > I assume that the stability issue has been fixed in firmware, correct?
> > What's going to happen if running the updated driver with old firmware?
> > What about combo Wi-Fi/BT firmware files, were those updated? I'm
> > currently using this driver with this firmware [1]
>
> There were some stability issues in the driver, that are fixed in previous patches.
>
> As for FW, I have checked internally and there were no power save related
> issues reported for any combo FWs.
Thanks for the information,
Francesco
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
2024-03-15 15:42 ` Francesco Dolcini
@ 2024-05-10 10:18 ` Neeraj Sanjay Kale
2024-05-10 14:40 ` Luiz Augusto von Dentz
0 siblings, 1 reply; 13+ messages in thread
From: Neeraj Sanjay Kale @ 2024-05-10 10:18 UTC (permalink / raw
To: luiz.dentz@gmail.com
Cc: marcel@holtmann.org, johan.hedberg@gmail.com, Amitkumar Karwar,
Rohit Fule, Sherry Sun, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, Geetu Naagar, Francesco Dolcini
Hi Luiz,
There are a couple of patches like this one pending review. Can you please have a look at it?
Let me know if you want me to send all the patches pending review once again.
Thank you for your time.
Regards,
Neeraj
> > > > This sets the default power save mode setting to enabled.
> > > >
> > > > The power save feature is now stable and stress test issues, such
> > > > as the TX timeout error, have been resolved.
> > >
> > > I assume that the stability issue has been fixed in firmware, correct?
> > > What's going to happen if running the updated driver with old firmware?
> > > What about combo Wi-Fi/BT firmware files, were those updated? I'm
> > > currently using this driver with this firmware [1]
> >
> > There were some stability issues in the driver, that are fixed in previous
> patches.
> >
> > As for FW, I have checked internally and there were no power save
> > related issues reported for any combo FWs.
>
> Thanks for the information,
>
> Francesco
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
2024-05-10 10:18 ` Neeraj Sanjay Kale
@ 2024-05-10 14:40 ` Luiz Augusto von Dentz
0 siblings, 0 replies; 13+ messages in thread
From: Luiz Augusto von Dentz @ 2024-05-10 14:40 UTC (permalink / raw
To: Neeraj Sanjay Kale
Cc: marcel@holtmann.org, johan.hedberg@gmail.com, Amitkumar Karwar,
Rohit Fule, Sherry Sun, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, Geetu Naagar, Francesco Dolcini
Hi,
On Fri, May 10, 2024 at 6:18 AM Neeraj Sanjay Kale
<neeraj.sanjaykale@nxp.com> wrote:
>
> Hi Luiz,
>
> There are a couple of patches like this one pending review. Can you please have a look at it?
> Let me know if you want me to send all the patches pending review once again.
> Thank you for your time.
It is no longer available at pw, please resend.
> Regards,
> Neeraj
>
> > > > > This sets the default power save mode setting to enabled.
> > > > >
> > > > > The power save feature is now stable and stress test issues, such
> > > > > as the TX timeout error, have been resolved.
> > > >
> > > > I assume that the stability issue has been fixed in firmware, correct?
> > > > What's going to happen if running the updated driver with old firmware?
> > > > What about combo Wi-Fi/BT firmware files, were those updated? I'm
> > > > currently using this driver with this firmware [1]
> > >
> > > There were some stability issues in the driver, that are fixed in previous
> > patches.
> > >
> > > As for FW, I have checked internally and there were no power save
> > > related issues reported for any combo FWs.
> >
> > Thanks for the information,
> >
> > Francesco
>
--
Luiz Augusto von Dentz
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
@ 2024-05-14 9:02 Neeraj Sanjay Kale
2024-05-17 7:17 ` Neeraj Sanjay Kale
0 siblings, 1 reply; 13+ messages in thread
From: Neeraj Sanjay Kale @ 2024-05-14 9:02 UTC (permalink / raw
To: marcel, luiz.dentz
Cc: linux-bluetooth, linux-kernel, amitkumar.karwar, rohit.fule,
neeraj.sanjaykale, sherry.sun, ziniu.wang_1, haibo.chen, LnxRevLi
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")
With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.
User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
v2: Corrected subject line. Added commit reference. (Paul Menzel)
drivers/bluetooth/btnxpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 7f88b6f52f26..42e929f0d141 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
/* Default configurations */
#define DEFAULT_H2C_WAKEUP_MODE WAKEUP_METHOD_BREAK
-#define DEFAULT_PS_MODE PS_MODE_DISABLE
+#define DEFAULT_PS_MODE PS_MODE_ENABLE
#define FW_INIT_BAUDRATE HCI_NXP_PRI_BAUDRATE
static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* RE: [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
2024-05-14 9:02 Neeraj Sanjay Kale
@ 2024-05-17 7:17 ` Neeraj Sanjay Kale
0 siblings, 0 replies; 13+ messages in thread
From: Neeraj Sanjay Kale @ 2024-05-17 7:17 UTC (permalink / raw
To: Neeraj Sanjay Kale, marcel@holtmann.org, luiz.dentz@gmail.com
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
Amitkumar Karwar, Rohit Fule, Sherry Sun, Luke Wang, Bough Chen,
LnxRevLi
Hi Luiz,
If no further reviews, can we merge this?
Thanks,
Neeraj
> This sets the default power save mode setting to enabled.
>
> The power save feature is now stable and stress test issues, such as the TX
> timeout error, have been resolved.
> commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
> power save stress test")
>
> With this setting, the driver will send the vendor command to FW at startup,
> to enable power save feature.
>
> User can disable this feature using the following vendor command:
> hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
>
> Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
> ---
> v2: Corrected subject line. Added commit reference. (Paul Menzel)
> drivers/bluetooth/btnxpuart.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
> index 7f88b6f52f26..42e929f0d141 100644
> --- a/drivers/bluetooth/btnxpuart.c
> +++ b/drivers/bluetooth/btnxpuart.c
> @@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
>
> /* Default configurations */
> #define DEFAULT_H2C_WAKEUP_MODE WAKEUP_METHOD_BREAK
> -#define DEFAULT_PS_MODE PS_MODE_DISABLE
> +#define DEFAULT_PS_MODE PS_MODE_ENABLE
> #define FW_INIT_BAUDRATE HCI_NXP_PRI_BAUDRATE
>
> static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,
> --
> 2.34.1
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
@ 2024-06-03 6:22 Neeraj Sanjay Kale
0 siblings, 0 replies; 13+ messages in thread
From: Neeraj Sanjay Kale @ 2024-06-03 6:22 UTC (permalink / raw
To: marcel, luiz.dentz
Cc: linux-bluetooth, linux-kernel, amitkumar.karwar, rohit.fule,
neeraj.sanjaykale, sherry.sun, ziniu.wang_1, haibo.chen, LnxRevLi
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")
With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.
User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
v2: Corrected subject line. Added commit reference. (Paul Menzel)
drivers/bluetooth/btnxpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 7f88b6f52f26..42e929f0d141 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
/* Default configurations */
#define DEFAULT_H2C_WAKEUP_MODE WAKEUP_METHOD_BREAK
-#define DEFAULT_PS_MODE PS_MODE_DISABLE
+#define DEFAULT_PS_MODE PS_MODE_ENABLE
#define FW_INIT_BAUDRATE HCI_NXP_PRI_BAUDRATE
static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
@ 2024-06-14 8:20 Neeraj Sanjay Kale
2024-06-14 17:00 ` patchwork-bot+bluetooth
0 siblings, 1 reply; 13+ messages in thread
From: Neeraj Sanjay Kale @ 2024-06-14 8:20 UTC (permalink / raw
To: marcel, luiz.dentz
Cc: linux-bluetooth, linux-kernel, amitkumar.karwar, rohit.fule,
neeraj.sanjaykale, sherry.sun, ziniu.wang_1, haibo.chen, LnxRevLi
This sets the default power save mode setting to enabled.
The power save feature is now stable and stress test issues, such as the
TX timeout error, have been resolved.
commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
power save stress test")
With this setting, the driver will send the vendor command to FW at
startup, to enable power save feature.
User can disable this feature using the following vendor command:
hcitool cmd 3f 23 03 00 00 (HCI_NXP_AUTO_SLEEP_MODE)
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
---
v2: Corrected subject line. Added commit reference. (Paul Menzel)
drivers/bluetooth/btnxpuart.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btnxpuart.c b/drivers/bluetooth/btnxpuart.c
index 7f88b6f52f26..42e929f0d141 100644
--- a/drivers/bluetooth/btnxpuart.c
+++ b/drivers/bluetooth/btnxpuart.c
@@ -281,7 +281,7 @@ static u8 crc8_table[CRC8_TABLE_SIZE];
/* Default configurations */
#define DEFAULT_H2C_WAKEUP_MODE WAKEUP_METHOD_BREAK
-#define DEFAULT_PS_MODE PS_MODE_DISABLE
+#define DEFAULT_PS_MODE PS_MODE_ENABLE
#define FW_INIT_BAUDRATE HCI_NXP_PRI_BAUDRATE
static struct sk_buff *nxp_drv_send_cmd(struct hci_dev *hdev, u16 opcode,
--
2.34.1
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
2024-06-14 8:20 Neeraj Sanjay Kale
@ 2024-06-14 17:00 ` patchwork-bot+bluetooth
0 siblings, 0 replies; 13+ messages in thread
From: patchwork-bot+bluetooth @ 2024-06-14 17:00 UTC (permalink / raw
To: Neeraj Sanjay Kale
Cc: marcel, luiz.dentz, linux-bluetooth, linux-kernel,
amitkumar.karwar, rohit.fule, sherry.sun, ziniu.wang_1,
haibo.chen, LnxRevLi
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Fri, 14 Jun 2024 13:50:39 +0530 you wrote:
> This sets the default power save mode setting to enabled.
>
> The power save feature is now stable and stress test issues, such as the
> TX timeout error, have been resolved.
> commit c7ee0bc8db32 ("Bluetooth: btnxpuart: Resolve TX timeout error in
> power save stress test")
>
> [...]
Here is the summary with links:
- [v2] Bluetooth: btnxpuart: Enable Power Save feature on startup
https://git.kernel.org/bluetooth/bluetooth-next/c/1db01d15e2da
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2024-06-14 17:00 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-03-04 17:07 [PATCH v2] Bluetooth: btnxpuart: Enable Power Save feature on startup Neeraj Sanjay Kale
2024-03-04 17:56 ` [v2] " bluez.test.bot
2024-03-04 19:29 ` [PATCH v2] " Francesco Dolcini
2024-03-15 13:13 ` Neeraj Sanjay Kale
2024-03-15 15:42 ` Francesco Dolcini
2024-05-10 10:18 ` Neeraj Sanjay Kale
2024-05-10 14:40 ` Luiz Augusto von Dentz
-- strict thread matches above, loose matches on Subject: below --
2024-06-14 8:20 Neeraj Sanjay Kale
2024-06-14 17:00 ` patchwork-bot+bluetooth
2024-06-03 6:22 Neeraj Sanjay Kale
2024-05-14 9:02 Neeraj Sanjay Kale
2024-05-17 7:17 ` Neeraj Sanjay Kale
2024-01-11 10:11 Neeraj Sanjay Kale
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).