From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: davem@davemloft.net, kuba@kernel.org
Cc: linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org
Subject: pull request: bluetooth-next 2024-05-10
Date: Fri, 10 May 2024 17:14:28 -0400 [thread overview]
Message-ID: <20240510211431.1728667-1-luiz.dentz@gmail.com> (raw)
The following changes since commit f8beae078c82abde57fed4a5be0bbc3579b59ad0:
Merge tag 'gtp-24-05-07' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/gtp Pablo neira Ayuso says: (2024-05-10 13:59:27 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git tags/for-net-next-2024-05-10
for you to fetch changes up to 75f819bdf9cafb0f1458e24c05d24eec17b2f597:
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config (2024-05-10 17:04:15 -0400)
----------------------------------------------------------------
bluetooth-next pull request for net-next:
- Add support MediaTek MT7921S SDIO
- Various fixes for -Wflex-array-member-not-at-end and -Wfamnae
- Add USB HW IDs for MT7921/MT7922/MT7925
- Add support for Intel BlazarI and Filmore Peak2 (BE201)
- Add initial support for Intel PCIe driver
- Remove HCI_AMP support
- Add TX timestamping support
----------------------------------------------------------------
Archie Pusaka (1):
Bluetooth: Populate hci_set_hw_info for Intel and Realtek
Chen-Yu Tsai (1):
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Dan Carpenter (1):
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Gustavo A. R. Silva (6):
Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings
Bluetooth: hci_conn, hci_sync: Use __counted_by() to avoid -Wfamnae warnings
Bluetooth: hci_conn: Use __counted_by() to avoid -Wfamnae warning
Bluetooth: hci_conn: Use struct_size() in hci_le_big_create_sync()
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Hans de Goede (1):
Bluetooth: hci_bcm: Limit bcm43455 baudrate to 2000000
Ian W MORRISON (1):
Bluetooth: Add support for MediaTek MT7922 device
Iulia Tanasescu (2):
Bluetooth: ISO: Make iso_get_sock_listen generic
Bluetooth: ISO: Handle PA sync when no BIGInfo reports are generated
Jiande Lu (2):
Bluetooth: btusb: Add USB HW IDs for MT7921/MT7922/MT7925
Bluetooth: btusb: Sort usb_device_id table by the ID
Johan Hovold (3):
Bluetooth: qca: drop bogus edl header checks
Bluetooth: qca: drop bogus module version
Bluetooth: qca: clean up defines
Kiran K (8):
Bluetooth: btintel: Define macros for image types
Bluetooth: btintel: Add support to download intermediate loader
Bluetooth: btintel: Add support for BlazarI
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Export few static functions
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Luiz Augusto von Dentz (3):
Bluetooth: Add proper definitions for scan interval and window
Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED
Bluetooth: HCI: Remove HCI_AMP support
Mahesh Talewad (1):
LE Create Connection command timeout increased to 20 secs
Marek Vasut (1):
dt-bindings: net: broadcom-bluetooth: Add CYW43439 DT binding
Pauli Virtanen (5):
Bluetooth: add support for skb TX timestamping
Bluetooth: ISO: add TX timestamping
Bluetooth: L2CAP: add TX timestamping
Bluetooth: SCO: add TX timestamping
Bluetooth: add experimental BT_POLL_ERRQUEUE socket option
Peter Tsao (1):
Bluetooth: btusb: Fix the patch for MT7920 the affected to MT7921
Sebastian Urban (1):
Bluetooth: compute LE flow credits based on recvbuf space
Sungwoo Kim (1):
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Tedd Ho-Jeong An (1):
Bluetooth: btintel_pcie: Add support for PCIe transport
Uri Arev (2):
Bluetooth: hci_intel: Fix multiple issues reported by checkpatch.pl
Bluetooth: ath3k: Fix multiple issues reported by checkpatch.pl
Uwe Kleine-König (3):
Bluetooth: btqcomsmd: Convert to platform remove callback returning void
Bluetooth: hci_bcm: Convert to platform remove callback returning void
Bluetooth: hci_intel: Convert to platform remove callback returning void
Zijun Hu (4):
Bluetooth: btusb: Correct timeout macro argument used to receive control message
Bluetooth: hci_conn: Remove a redundant check for HFP offload
Bluetooth: Remove 3 repeated macro definitions
Bluetooth: qca: Support downloading board id specific NVM for WCN7850
.../net/bluetooth/mediatek,mt7921s-bluetooth.yaml | 55 +
.../bindings/net/broadcom-bluetooth.yaml | 33 +-
MAINTAINERS | 1 +
drivers/bluetooth/Kconfig | 11 +
drivers/bluetooth/Makefile | 1 +
drivers/bluetooth/ath3k.c | 25 +-
drivers/bluetooth/btintel.c | 88 +-
drivers/bluetooth/btintel.h | 51 +-
drivers/bluetooth/btintel_pcie.c | 1358 ++++++++++++++++++++
drivers/bluetooth/btintel_pcie.h | 430 +++++++
drivers/bluetooth/btmrvl_main.c | 9 -
drivers/bluetooth/btqca.c | 47 +-
drivers/bluetooth/btqca.h | 60 +-
drivers/bluetooth/btqcomsmd.c | 6 +-
drivers/bluetooth/btrsi.c | 1 -
drivers/bluetooth/btrtl.c | 7 +
drivers/bluetooth/btsdio.c | 8 -
drivers/bluetooth/btusb.c | 55 +-
drivers/bluetooth/hci_bcm.c | 8 +-
drivers/bluetooth/hci_bcm4377.c | 1 -
drivers/bluetooth/hci_intel.c | 25 +-
drivers/bluetooth/hci_ldisc.c | 6 -
drivers/bluetooth/hci_serdev.c | 5 -
drivers/bluetooth/hci_uart.h | 1 -
drivers/bluetooth/hci_vhci.c | 10 +-
drivers/bluetooth/virtio_bt.c | 2 -
include/net/bluetooth/bluetooth.h | 15 +-
include/net/bluetooth/hci.h | 136 +-
include/net/bluetooth/hci_core.h | 80 +-
include/net/bluetooth/l2cap.h | 36 +-
include/uapi/linux/virtio_bt.h | 1 -
net/bluetooth/6lowpan.c | 2 +-
net/bluetooth/af_bluetooth.c | 119 +-
net/bluetooth/hci_conn.c | 261 +++-
net/bluetooth/hci_core.c | 178 +--
net/bluetooth/hci_event.c | 244 +---
net/bluetooth/hci_request.h | 4 -
net/bluetooth/hci_sock.c | 5 +-
net/bluetooth/hci_sync.c | 196 +--
net/bluetooth/iso.c | 183 +--
net/bluetooth/l2cap_core.c | 151 ++-
net/bluetooth/l2cap_sock.c | 114 +-
net/bluetooth/mgmt.c | 149 ++-
net/bluetooth/sco.c | 33 +-
net/bluetooth/smp.c | 2 +-
45 files changed, 3046 insertions(+), 1167 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/bluetooth/mediatek,mt7921s-bluetooth.yaml
create mode 100644 drivers/bluetooth/btintel_pcie.c
create mode 100644 drivers/bluetooth/btintel_pcie.h
next reply other threads:[~2024-05-10 21:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-10 21:14 Luiz Augusto von Dentz [this message]
2024-05-13 21:26 ` pull request: bluetooth-next 2024-05-10 Jakub Kicinski
2024-05-13 22:09 ` Luiz Augusto von Dentz
2024-05-13 22:43 ` Jakub Kicinski
2024-05-14 1:32 ` Willem de Bruijn
2024-05-14 2:01 ` Luiz Augusto von Dentz
2024-05-14 2:09 ` Willem de Bruijn
2024-05-14 2:17 ` Luiz Augusto von Dentz
2024-05-14 2:25 ` Willem de Bruijn
2024-05-14 16:19 ` Pauli Virtanen
2024-05-14 18:40 ` Willem de Bruijn
2024-05-14 2:12 ` Luiz Augusto von Dentz
2024-05-14 14:34 ` Jakub Kicinski
2024-05-14 14:44 ` Luiz Augusto von Dentz
2024-05-14 1:34 ` Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240510211431.1728667-1-luiz.dentz@gmail.com \
--to=luiz.dentz@gmail.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).