messages from 2023-05-09 17:22:36 to 2023-05-11 04:32:28 UTC [more...]
[PATCH v6 0/8] add DSC 1.2 dpu supports
2023-05-11 4:32 UTC (12+ messages)
` [PATCH v6 1/8] drm/msm/dpu: add dsc blocks for remaining chipsets in catalog
` [PATCH v6 2/8] drm/msm/dpu: add DPU_PINGPONG_DSC feature bit for DPU < 7.0.0
` [PATCH v6 3/8] drm/msm/dpu: test DPU_PINGPONG_DSC bit before assign DSC ops to PINGPONG
` [PATCH v6 4/8] drm/msm/dpu: Introduce PINGPONG_NONE to disconnect DSC from PINGPONG
` [PATCH v6 5/8] drm/msm/dpu: add support for DSC encoder v1.2 engine
` [PATCH v6 6/8] drm/msm/dpu: separate DSC flush update out of interface
` [PATCH v6 7/8] drm/msm/dpu: add DSC 1.2 hw blocks for relevant chipsets
` [PATCH v6 8/8] drm/msm/dpu: tear down DSC data path when DSC disabled
[PATCH v7 0/8] Introduce MSM-specific DSC helpers
2023-05-11 4:26 UTC (17+ messages)
` [PATCH v7 1/8] drm/display/dsc: Add flatness and initial scale value calculations
` [PATCH v7 2/8] drm/display/dsc: add helper to set semi-const parameters
` [PATCH v7 3/8] drm/msm/dsi: use DRM DSC helpers for DSC setup
` [PATCH v7 4/8] drm/msm: Add MSM-specific DSC helper methods
` [PATCH v7 5/8] drm/msm/dpu: Use DRM DSC helper for det_thresh_flatness
` [PATCH v7 6/8] drm/msm/dpu: Fix slice_last_group_size calculation
` [PATCH v7 7/8] drm/msm/dsi: Use MSM and DRM DSC helper methods
` [PATCH v7 8/8] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
[PATCH v1 0/2] enable HDP plugin/unplugged interrupts to hpd_enable/disable
2023-05-11 4:24 UTC (10+ messages)
` [PATCH v1 1/2] drm/msm/dp: "
` [PATCH v1 2/2] drm/msm/dp: add mutex to protect internal_hpd against race condition between different threads
[PATCH v2] bus: mhi: host: Skip MHI reset if device is in RDDM
2023-05-11 2:33 UTC
[PATCH v9 0/8] Introduce MSM-specific DSC helpers
2023-05-10 22:54 UTC (9+ messages)
` [PATCH v9 1/8] drm/display/dsc: Add flatness and initial scale value calculations
` [PATCH v9 2/8] drm/display/dsc: add helper to set semi-const parameters
` [PATCH v9 3/8] drm/msm/dsi: use DRM DSC helpers for DSC setup
` [PATCH v9 4/8] drm/msm: Add MSM-specific DSC helper methods
` [PATCH v9 5/8] drm/msm/dpu: Use fixed DRM DSC helper for det_thresh_flatness
` [PATCH v9 6/8] drm/msm/dpu: Fix slice_last_group_size calculation
` [PATCH v9 7/8] drm/msm/dsi: Use MSM and DRM DSC helper methods
` [PATCH v9 8/8] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
[PATCH v8 0/8] Introduce MSM-specific DSC helpers
2023-05-10 22:45 UTC (9+ messages)
` [PATCH v8 1/8] drm/display/dsc: Add flatness and initial scale value calculations
` [PATCH v8 2/8] drm/display/dsc: add helper to set semi-const parameters
` [PATCH v8 3/8] drm/msm/dsi: use DRM DSC helpers for DSC setup
` [PATCH v8 4/8] drm/msm: Add MSM-specific DSC helper methods
` [PATCH v8 5/8] drm/msm/dpu: Use fixed DRM DSC helper for det_thresh_flatness
` [PATCH v8 6/8] drm/msm/dpu: Fix slice_last_group_size calculation
` [PATCH v8 7/8] drm/msm/dsi: Use MSM and DRM DSC helper methods
` [PATCH v8 8/8] drm/msm/dsi: update hdisplay calculation for dsi_timing_setup
[PATCH AUTOSEL 5.15 2/4] soundwire: qcom: gracefully handle too many ports in DT
2023-05-10 20:50 UTC
[PATCH AUTOSEL 6.1 3/8] soundwire: qcom: gracefully handle too many ports in DT
2023-05-10 20:49 UTC
[PATCH AUTOSEL 6.2 4/9] soundwire: qcom: gracefully handle too many ports in DT
2023-05-10 20:49 UTC
[PATCH AUTOSEL 6.3 4/9] soundwire: qcom: gracefully handle too many ports in DT
2023-05-10 20:49 UTC
[PATCH V2] clk: qcom: camcc-sc7180: Add parent dependency to all camera GDSCs
2023-05-10 19:32 UTC (3+ messages)
[PATCH] accel/qaic: silence some uninitialized variable warnings
2023-05-10 16:48 UTC (3+ messages)
[PATCH v7 0/4] Add pinctrl support for SDX75
2023-05-10 15:00 UTC (4+ messages)
` [PATCH v7 1/4] dt-bindings: pinctrl: qcom: Add SDX75 pinctrl devicetree compatible
` [PATCH v7 3/4] pinctrl: qcom: Refactor generic qcom pinctrl driver
` [PATCH v7 4/4] pinctrl: qcom: Add SDX75 pincontrol driver
[PATCH] bus: mhi: host: Skip MHI reset if device is in RDDM
2023-05-10 14:50 UTC (2+ messages)
[PATCH 0/3] Provide parent clocks to msm8226 mmcc
2023-05-10 14:41 UTC (6+ messages)
` [PATCH 1/3] ARM: dts: qcom: msm8226: Use XO from rpmcc where possible
` [PATCH 2/3] dt-bindings: clock: qcom,mmcc: define clocks/clock-names for MSM8226
` [PATCH 3/3] ARM: dts: qcom: msm8226: Provide clocks to mmcc node
[PATCH v6 0/4] Add pinctrl support for SDX75
2023-05-10 14:35 UTC (14+ messages)
` [PATCH v6 1/4] dt-bindings: pinctrl: qcom: Add SDX75 pinctrl devicetree compatible
` [PATCH v6 3/4] pinctrl: qcom: Refactor generic qcom pinctrl driver
` [PATCH v6 4/4] pinctrl: qcom: Add SDX75 pincontrol driver
` [PATCH v6 2/4] pinctrl: qcom: Remove the msm_function struct
[PATCH v4 0/8] Add minimal boot support for IPQ5018
2023-05-10 14:31 UTC (14+ messages)
` [PATCH v4 1/8] dt-bindings: arm64: Add IPQ5018 clock and reset
` [PATCH v4 3/8] dt-bindings: pinctrl: qcom: Add support for ipq5018
` [PATCH v4 4/8] pinctrl: qcom: Add IPQ5018 pinctrl driver
` [PATCH v4 5/8] dt-bindings: qcom: Add ipq5018 bindings
` [PATCH v4 6/8] dt-bindings: firmware: document IPQ5018 SCM
` [PATCH v4 7/8] arm64: dts: Add ipq5018 SoC and rdp432-c2 board support
` [PATCH v4 8/8] arm64: defconfig: Enable IPQ5018 SoC base configs
[PATCH 0/6] Enable MSM8226 TSENS support
2023-05-10 14:14 UTC (8+ messages)
` [PATCH 1/6] dt-bindings: nvmem: qfprom: Add compatible for MSM8226
` [PATCH 2/6] dt-bindings: thermal: tsens: "
` [PATCH 4/6] ARM: dts: msm8226: Add qfprom node
[PATCH v11 0/9] Enable IPQ9754 USB
2023-05-10 14:11 UTC (7+ messages)
` [PATCH v11 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
` [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node
[PATCH 0/2] Add initial support for RDP418 of IPQ9574 family
2023-05-10 12:45 UTC (4+ messages)
` [PATCH 1/2] dt-bindings: arm: qcom: document AL02-C2 board based on "
` [PATCH 2/2] arm64: dts: qcom: ipq9574: add support for RDP418 variant
[PATCH 0/2] Make SID for PM7250B configurable (and a small fixup)
2023-05-10 11:27 UTC (10+ messages)
` [PATCH 2/2] arm64: dts: qcom: pm7250b: make SID configurable
[PATCH V2] mtd: rawnand: qcom: Implement exec_op()
2023-05-10 9:01 UTC (3+ messages)
[PATCH v2 0/6] arm64: qcom: sm84[34]50: enable DP altmode on USB-C Connector
2023-05-10 8:31 UTC (7+ messages)
` [PATCH v2 1/6] arm64: dts: qcom: sm8350: add ports subnodes in usb1 qmpphy node
` [PATCH v2 2/6] arm64: dts: qcom: sm8450: "
` [PATCH v2 3/6] arm64: dts: qcom: sm8350-hdk: Add QMP & DP to SuperSpeed graph
` [PATCH v2 4/6] arm64: dts: qcom: sm8450-hdk: "
` [PATCH v2 5/6] arm64: defconfig: enable FSA4480 driver as module
` [PATCH v2 6/6] qcom: pmic_glink: enable altmode for SM8450
[PATCH v6] dt-bindings: mfd: qcom,spmi-pmic: Add pattern property for phy
2023-05-10 8:27 UTC
[PATCH] soc: qcom: Rename ice to qcom-ice to avoid module name conflict
2023-05-10 8:25 UTC (2+ messages)
[PATCH V6 2/3] soc: qcom: boot_stat: Add Driver Support for Boot Stats
2023-05-10 8:18 UTC (2+ messages)
[PATCH v2 0/8] phy: qcom-qmp-combo: Support orientation switching
2023-05-10 7:55 UTC (10+ messages)
` [PATCH v2 1/8] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch
` [PATCH v2 2/8] phy: qcom-qmp-combo: Move phy_mutex out of com_init/exit
` [PATCH v2 3/8] phy: qcom-qmp-combo: Extend phy_mutex to all phy_ops
` [PATCH v2 4/8] phy: qcom-qmp-combo: Introduce orientation variable
` [PATCH v2 5/8] phy: qcom-qmp-combo: Introduce orientation switching
` [PATCH v2 6/8] phy: qcom-qmp-combo: Introduce drm_bridge
` [PATCH v2 7/8] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph
` [PATCH v2 8/8] arm64: dts: qcom: sc8280xp-x13s: "
[PATCH 0/4] Add Video Clock Controller driver for SM8550
2023-05-10 7:13 UTC (5+ messages)
` [PATCH 1/4] clk: qcom: clk-alpha-pll: Add support for lucid ole pll ops
` [PATCH 2/4] dt-bindings: clock: qcom: Add SM8550 video clock controller
[PATCH V4 0/3] Add video clock controller driver for SM8450
2023-05-10 7:12 UTC (7+ messages)
` [PATCH V4 1/3] dt-bindings: clock: qcom: Add SM8450 video clock controller
` [PATCH V4 2/3] clk: qcom: videocc-sm8450: Add video clock controller driver for SM8450
` [PATCH V4 3/3] arm64: dts: qcom: sm8450: Add video clock controller
[PATCH v3 6/7] ufs: mcq: Use ufshcd_mcq_poll_cqe_lock() in mcq mode
2023-05-10 5:24 UTC
[PATCH v3 0/3] Add support to configure Coresight Dummy subunit
2023-05-10 4:29 UTC (3+ messages)
` [PATCH v3 3/3] Documentation: trace: Add documentation for Coresight Dummy Trace
[PATCH v4 0/3] Add support to configure Coresight Dummy subunit
2023-05-10 3:21 UTC (8+ messages)
` [PATCH v4 1/3] Coresight: Add coresight dummy driver
` [PATCH v4 2/3] dt-bindings: arm: Add Coresight Dummy Trace
[RFC PATCH 0/1] Categorize ARM dts directory
2023-05-09 22:54 UTC (8+ messages)
[PATCH v12 00/25] Drivers for Gunyah hypervisor
2023-05-09 22:52 UTC (5+ messages)
` [PATCH v12 06/25] mailbox: Add Gunyah message queue mailbox
[PATCH] soc: qcom: ocmem: Add OCMEM hardware version print
2023-05-09 22:34 UTC (2+ messages)
[PATCH 0/6] Add MSM8226 OCMEM support plus some extra OCMEM driver fixes
2023-05-09 22:32 UTC (14+ messages)
` [PATCH 1/6] soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros
` [PATCH 2/6] soc: qcom: ocmem: Use dev_err_probe where appropriate
` [PATCH 4/6] dt-bindings: sram: qcom,ocmem: Add msm8226 support
` [PATCH 3/6] soc: qcom: ocmem: make iface clock optional
[PATCH v13 00/24] Drivers for Gunyah hypervisor
2023-05-09 20:48 UTC (25+ messages)
` [PATCH v13 01/24] dt-bindings: Add binding for gunyah hypervisor
` [PATCH v13 02/24] gunyah: Common types and error codes for Gunyah hypercalls
` [PATCH v13 03/24] virt: gunyah: Add hypercalls to identify Gunyah
` [PATCH v13 04/24] virt: gunyah: msgq: Add hypercalls to send and receive messages
` [PATCH v13 05/24] mailbox: Add Gunyah message queue mailbox
` [PATCH v13 06/24] gunyah: rsc_mgr: Add resource manager RPC core
` [PATCH v13 07/24] gunyah: rsc_mgr: Add VM lifecycle RPC
` [PATCH v13 08/24] gunyah: vm_mgr: Introduce basic VM Manager
` [PATCH v13 09/24] gunyah: rsc_mgr: Add RPC for sharing memory
` [PATCH v13 10/24] gunyah: vm_mgr: Add/remove user memory regions
` [PATCH v13 11/24] gunyah: vm_mgr: Add ioctls to support basic non-proxy VM boot
` [PATCH v13 12/24] samples: Add sample userspace Gunyah VM Manager
` [PATCH v13 13/24] gunyah: rsc_mgr: Add platform ops on mem_lend/mem_reclaim
` [PATCH v13 14/24] virt: gunyah: Add Qualcomm Gunyah platform ops
` [PATCH v13 15/24] docs: gunyah: Document Gunyah VM Manager
` [PATCH v13 16/24] virt: gunyah: Translate gh_rm_hyp_resource into gunyah_resource
` [PATCH v13 17/24] gunyah: vm_mgr: Add framework for VM Functions
` [PATCH v13 18/24] virt: gunyah: Add resource tickets
` [PATCH v13 19/24] virt: gunyah: Add IO handlers
` [PATCH v13 20/24] virt: gunyah: Add proxy-scheduled vCPUs
` [PATCH v13 21/24] virt: gunyah: Add hypercalls for sending doorbell
` [PATCH v13 22/24] virt: gunyah: Add irqfd interface
` [PATCH v13 23/24] virt: gunyah: Add ioeventfd
` [PATCH v13 24/24] MAINTAINERS: Add Gunyah hypervisor drivers section
[PATCH v4] drm/msm: Fix submit error-path leaks
2023-05-09 20:30 UTC
[PATCH 0/4] Add DSC v1.2 Support for DSI
2023-05-09 20:25 UTC (10+ messages)
` [PATCH 2/4] drm/msm/dsi: Fix compressed word count calculation
` [Freedreno] "
[PATCH 00/18] remoteproc: Convert to platform remove callback returning void
2023-05-09 20:09 UTC (2+ messages)
[PATCH] Revert "drm/msm/dp: Remove INIT_SETUP delay"
2023-05-09 19:15 UTC (6+ messages)
[PATCH 0/2] Add initial support for RDP442 of IPQ5332 family
2023-05-09 17:33 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: arm: qcom: document MI01.3 board based on "
` [PATCH 2/2] arm64: dts: qcom: ipq5332: add support for the RDP442 variant
[PATCH v3] drm/msm: Fix submit error-path leaks
2023-05-09 17:22 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).