* [PATCH v5] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
@ 2024-03-11 10:09 Hui Liu via B4 Relay
2024-03-12 0:13 ` Konrad Dybcio
2024-03-19 2:48 ` Bjorn Andersson
0 siblings, 2 replies; 3+ messages in thread
From: Hui Liu via B4 Relay @ 2024-03-11 10:09 UTC (permalink / raw
To: Bjorn Andersson, Konrad Dybcio, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel, Hui Liu
From: Hui Liu <quic_huliu@quicinc.com>
The Volume Down & Power buttons are controlled by the PMIC via
the PON hardware, and the Volume Up is connected to a PMIC gpio.
Enable the necessary hardware and setup the GPIO state for the
Volume Up gpio key.
Signed-off-by: Hui Liu <quic_huliu@quicinc.com>
---
Changes in v5:
- Removed the status setting for pmk8350_pon, because the default
status is "okay".
- Link to v4: https://lore.kernel.org/r/20240304-gpio-keys-v4-1-03604d778c86@quicinc.com
Changes in v4:
- Switch the order of "pinctrl-0" and "pinctrl-names".
- Update "volume_up" to "Volume_up".
- Remove "linux,input-type", because the default value is 1(EV_KEY).
- Link to v3: https://lore.kernel.org/r/20240301-gpio-keys-v3-1-ca664de8775c@quicinc.com
Changes in v3:
- Update the commit more concise and explicit.
- remove "power-source" property and update the numeric value to defined
name for "qcom,drive-strength".
- Link to v2: https://lore.kernel.org/r/20240223-gpio-keys-v2-1-19f48b3d8762@quicinc.com
Changes in v2:
- Update the commit description.
- Link to v1: https://lore.kernel.org/r/20240206-gpio-keys-v1-1-7683799daf8d@quicinc.com
---
arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 37 ++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index acf145d1d97c..a4a7d55fb45c 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -9,7 +9,9 @@
#define PM7250B_SID 8
#define PM7250B_SID1 9
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sc7280.dtsi"
#include "pm7250b.dtsi"
@@ -39,6 +41,22 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&key_vol_up_default>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume_up";
+ gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+ };
+
reserved-memory {
xbl_mem: xbl@80700000 {
reg = <0x0 0x80700000 0x0 0x100000>;
@@ -421,6 +439,16 @@ vreg_bob_3p296: bob {
};
};
+&pm7325_gpios {
+ key_vol_up_default: key-vol-up-state {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
+};
+
&pm8350c_pwm {
status = "okay";
@@ -448,6 +476,15 @@ led@3 {
};
};
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
---
base-commit: 23e11d0318521e8693459b0e4d23aec614b3b68b
change-id: 20240206-gpio-keys-138bbd850298
Best regards,
--
Hui Liu <quic_huliu@quicinc.com>
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
2024-03-11 10:09 [PATCH v5] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons Hui Liu via B4 Relay
@ 2024-03-12 0:13 ` Konrad Dybcio
2024-03-19 2:48 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Konrad Dybcio @ 2024-03-12 0:13 UTC (permalink / raw
To: quic_huliu, Bjorn Andersson, Rob Herring, Krzysztof Kozlowski,
Conor Dooley
Cc: linux-arm-msm, devicetree, linux-kernel
On 3/11/24 11:09, Hui Liu via B4 Relay wrote:
> From: Hui Liu <quic_huliu@quicinc.com>
>
> The Volume Down & Power buttons are controlled by the PMIC via
> the PON hardware, and the Volume Up is connected to a PMIC gpio.
>
> Enable the necessary hardware and setup the GPIO state for the
> Volume Up gpio key.
>
> Signed-off-by: Hui Liu <quic_huliu@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Konrad
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v5] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
2024-03-11 10:09 [PATCH v5] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons Hui Liu via B4 Relay
2024-03-12 0:13 ` Konrad Dybcio
@ 2024-03-19 2:48 ` Bjorn Andersson
1 sibling, 0 replies; 3+ messages in thread
From: Bjorn Andersson @ 2024-03-19 2:48 UTC (permalink / raw
To: Konrad Dybcio, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
Hui Liu
Cc: linux-arm-msm, devicetree, linux-kernel
On Mon, 11 Mar 2024 18:09:31 +0800, Hui Liu wrote:
> The Volume Down & Power buttons are controlled by the PMIC via
> the PON hardware, and the Volume Up is connected to a PMIC gpio.
>
> Enable the necessary hardware and setup the GPIO state for the
> Volume Up gpio key.
>
>
> [...]
Applied, thanks!
[1/1] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons
commit: 511b4858dc8a1b4d857dc847976a5481c9b367fa
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-03-19 2:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-03-11 10:09 [PATCH v5] arm64: dts: qcom: qcm6490-idp: enable PMIC Volume and Power buttons Hui Liu via B4 Relay
2024-03-12 0:13 ` Konrad Dybcio
2024-03-19 2:48 ` Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).