[RFC PATCH v1] arm64: dts: amlogic: Add Freebox fbx8am boards

From: Marc Gonzalez <mgonzalez@freebox.fr>
To: AML <linux-amlogic@lists.infradead.org>, DT <devicetree@vger.kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Pierre-Hugues Husson <phhusson@freebox.fr>
Subject: [RFC PATCH v1] arm64: dts: amlogic: Add Freebox fbx8am boards
Date: Tue, 6 Feb 2024 14:12:38 +0100	[thread overview]
Message-ID: <8c865c62-cd80-4c78-9fc5-c85491c037ca@freebox.fr> (raw)

From: Pierre-Hugues Husson <phhusson@freebox.fr>

The fbx8am boards are based on the Amlogic Meson G12A S905X2 SoC,
and the SEI510 board design.

Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
---
Request For Comments to spot obvious mistakes before formal submission
NB: on IRC, narmstrong mentioned:
> adding dtbos for variants seems to be the new preferred way to handle such case
> the fdtoverlay utility works well for this case
---
 Documentation/devicetree/bindings/arm/amlogic.yaml        |   8 +
 Documentation/devicetree/bindings/vendor-prefixes.yaml    |   2 +
 arch/arm64/boot/dts/amlogic/Makefile                      |   2 +
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dts    |  30 +++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dts |  23 ++
 arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dtsi        | 465 ++++++++++++++++++++++++++++++++++
 6 files changed, 530 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index caab7ceeda45a..2d9cce35d6f1d 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -150,6 +150,14 @@ properties:
               - seirobotics,sei510
           - const: amlogic,g12a
 
+      - description: Freebox Boards with the Amlogic Meson G12A S905D2/X2/Y2 SoC
+        items:
+          - enum:
+              - freebox,fbx8am-brcm
+              - freebox,fbx8am-realtek
+          - const: freebox,fbx8am
+          - const: amlogic,g12a
+
       - description: Boards with the Amlogic Meson G12B A311D SoC
         items:
           - enum:
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 1a0dc04f1db47..4f5a1f4e6689a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -500,6 +500,8 @@ patternProperties:
     description: FocalTech Systems Co.,Ltd
   "^forlinx,.*":
     description: Baoding Forlinx Embedded Technology Co., Ltd.
+  "^freebox,.*":
+    description: Freebox SAS
   "^freecom,.*":
     description: Freecom Gmbh
   "^frida,.*":
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cc8b34bd583d8..dd99ee3efec61 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -8,6 +8,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j110-rev-3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dts
new file mode 100644
index 0000000000000..1bf39d2d1eeb3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+
+#include "meson-g12a-fbx8am.dtsi"
+
+/ {
+	compatible = "freebox,fbx8am-brcm", "freebox,fbx8am", "amlogic,g12a";
+};
+
+&uart_A {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+		vbat-supply = <&vddao_3v3>;
+		vddio-supply = <&vddio_ao1v8>;
+	};
+};
+
+&sd_emmc_a {
+	/* NB: may be either AP6398S or AP6398SR3 wifi module */
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dts
new file mode 100644
index 0000000000000..dc268b8f5d169
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/dts-v1/;
+
+#include "meson-g12a-fbx8am.dtsi"
+
+/ {
+	compatible = "freebox,fbx8am-realtek", "freebox,fbx8am", "amlogic,g12a";
+};
+
+&uart_A {
+	bluetooth {
+		compatible = "realtek,rtl8822cs-bt";
+		enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_HIGH>;
+		device-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&sd_emmc_a {
+	// No explicit compatible for rtl8822cs sdio
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dtsi
new file mode 100644
index 0000000000000..5e98d0cd61998
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am.dtsi
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (c) 2024 Freebox SAS
+
+/*
+ * Codename for this board was SEI530FB.
+ * It is based on SEI510.
+ */
+
+#include "meson-g12a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "freebox,fbx8am", "amlogic,g12a";
+	model = "Freebox Player Pop";
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		/* Physical user-accessible reset button near USB port */
+		power-button {
+			label = "Reset";
+			linux,code = <BTN_MISC>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	spdif_dit: audio-codec-2 {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+		status = "okay";
+		sound-name-prefix = "DIT";
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddao_3v3_t: regultor-vddao_3v3_t {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3_T";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddao_3v3>;
+		gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+		enable-active-high;
+	};
+
+	vddcpu: regulator-vddcpu {
+		/*
+		 * SY8120B1ABC DC/DC Regulator.
+		 */
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <721000>;
+		regulator-max-microvolt = <1022000>;
+
+		pwm-supply = <&ao_5v>;
+
+		pwms = <&pwm_AO_cd 1 1250 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <10>; /* required for 43752 */
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SEI510";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
+				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
+				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* spdif hdmi or toslink interface */
+		dai-link-4 {
+			sound-dai = <&spdifout_a>;
+
+			codec-0 {
+			sound-dai = <&spdif_dit>;
+			};
+
+			codec-1 {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+			};
+		};
+
+		/* spdif hdmi interface */
+		dai-link-5 {
+			sound-dai = <&spdifout_b>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-6 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&spdifout_a {
+	pinctrl-0 = <&spdif_out_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spdifout_b {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pdm {
+	pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
+		    <&pdm_din2_z_pins>, <&pdm_din3_z_pins>,
+		    <&pdm_dclk_z_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <50000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
-- 
2.34.1

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
