From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: kernel@pengutronix.de, Neil Armstrong <neil.armstrong@linaro.org>,
Kevin Hilman <khilman@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
linux-pwm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Subject: [PATCH v4 023/115] pwm: meson: Make use of pwmchip_parent() macro
Date: Wed, 6 Dec 2023 12:43:37 +0100 [thread overview]
Message-ID: <52b4ea8c74ef274832b06bfc57c9706c140dd329.1701860672.git.u.kleine-koenig@pengutronix.de> (raw)
In-Reply-To: <cover.1701860672.git.u.kleine-koenig@pengutronix.de>
struct pwm_chip::dev is about to change. To not have to touch this
driver in the same commit as struct pwm_chip::dev, use the macro
provided for exactly this purpose.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/pwm/pwm-meson.c | 38 +++++++++++++++++++++-----------------
1 file changed, 21 insertions(+), 17 deletions(-)
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 5bea53243ed2..640d6fe63799 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -122,7 +122,7 @@ static int meson_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct meson_pwm *meson = to_meson_pwm(chip);
struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
- struct device *dev = chip->dev;
+ struct device *dev = pwmchip_parent(chip);
int err;
err = clk_prepare_enable(channel->clk);
@@ -143,9 +143,10 @@ static void meson_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
clk_disable_unprepare(channel->clk);
}
-static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
+static int meson_pwm_calc(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
+ struct meson_pwm *meson = to_meson_pwm(chip);
struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
unsigned int cnt, duty_cnt;
unsigned long fin_freq;
@@ -169,19 +170,19 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
fin_freq = clk_round_rate(channel->clk, freq);
if (fin_freq == 0) {
- dev_err(meson->chip.dev, "invalid source clock frequency\n");
+ dev_err(pwmchip_parent(chip), "invalid source clock frequency\n");
return -EINVAL;
}
- dev_dbg(meson->chip.dev, "fin_freq: %lu Hz\n", fin_freq);
+ dev_dbg(pwmchip_parent(chip), "fin_freq: %lu Hz\n", fin_freq);
cnt = div_u64(fin_freq * period, NSEC_PER_SEC);
if (cnt > 0xffff) {
- dev_err(meson->chip.dev, "unable to get period cnt\n");
+ dev_err(pwmchip_parent(chip), "unable to get period cnt\n");
return -EINVAL;
}
- dev_dbg(meson->chip.dev, "period=%llu cnt=%u\n", period, cnt);
+ dev_dbg(pwmchip_parent(chip), "period=%llu cnt=%u\n", period, cnt);
if (duty == period) {
channel->hi = cnt;
@@ -192,7 +193,7 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
} else {
duty_cnt = div_u64(fin_freq * duty, NSEC_PER_SEC);
- dev_dbg(meson->chip.dev, "duty=%llu duty_cnt=%u\n", duty, duty_cnt);
+ dev_dbg(pwmchip_parent(chip), "duty=%llu duty_cnt=%u\n", duty, duty_cnt);
channel->hi = duty_cnt;
channel->lo = cnt - duty_cnt;
@@ -203,8 +204,9 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
return 0;
}
-static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
+static void meson_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct meson_pwm *meson = to_meson_pwm(chip);
struct meson_pwm_channel *channel = &meson->channels[pwm->hwpwm];
struct meson_pwm_channel_data *channel_data;
unsigned long flags;
@@ -215,7 +217,7 @@ static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
err = clk_set_rate(channel->clk, channel->rate);
if (err)
- dev_err(meson->chip.dev, "setting clock rate failed\n");
+ dev_err(pwmchip_parent(chip), "setting clock rate failed\n");
spin_lock_irqsave(&meson->lock, flags);
@@ -230,8 +232,9 @@ static void meson_pwm_enable(struct meson_pwm *meson, struct pwm_device *pwm)
spin_unlock_irqrestore(&meson->lock, flags);
}
-static void meson_pwm_disable(struct meson_pwm *meson, struct pwm_device *pwm)
+static void meson_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct meson_pwm *meson = to_meson_pwm(chip);
unsigned long flags;
u32 value;
@@ -269,16 +272,16 @@ static int meson_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
channel->hi = ~0;
channel->lo = 0;
- meson_pwm_enable(meson, pwm);
+ meson_pwm_enable(chip, pwm);
} else {
- meson_pwm_disable(meson, pwm);
+ meson_pwm_disable(chip, pwm);
}
} else {
- err = meson_pwm_calc(meson, pwm, state);
+ err = meson_pwm_calc(chip, pwm, state);
if (err < 0)
return err;
- meson_pwm_enable(meson, pwm);
+ meson_pwm_enable(chip, pwm);
}
return 0;
@@ -432,10 +435,11 @@ static const struct of_device_id meson_pwm_matches[] = {
};
MODULE_DEVICE_TABLE(of, meson_pwm_matches);
-static int meson_pwm_init_channels(struct meson_pwm *meson)
+static int meson_pwm_init_channels(struct pwm_chip *chip)
{
+ struct meson_pwm *meson = to_meson_pwm(chip);
struct clk_parent_data mux_parent_data[MESON_MAX_MUX_PARENTS] = {};
- struct device *dev = meson->chip.dev;
+ struct device *dev = pwmchip_parent(chip);
unsigned int i;
char name[255];
int err;
@@ -549,7 +553,7 @@ static int meson_pwm_probe(struct platform_device *pdev)
meson->data = of_device_get_match_data(&pdev->dev);
- err = meson_pwm_init_channels(meson);
+ err = meson_pwm_init_channels(&meson->chip);
if (err < 0)
return err;
--
2.42.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2023-12-06 11:49 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-06 11:43 [PATCH v4 000/115] pwm: Fix lifetime issues for pwm_chips Uwe Kleine-König
2023-12-06 11:43 ` Uwe Kleine-König [this message]
2023-12-06 11:44 ` [PATCH v4 075/115] pwm: meson: Make use of devm_pwmchip_alloc() function Uwe Kleine-König
2023-12-08 15:41 ` [PATCH v4 000/115] pwm: Fix lifetime issues for pwm_chips Thierry Reding
2023-12-08 18:50 ` Uwe Kleine-König
2023-12-11 11:33 ` Thierry Reding
2023-12-11 12:18 ` Uwe Kleine-König
2023-12-12 21:05 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52b4ea8c74ef274832b06bfc57c9706c140dd329.1701860672.git.u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=jbrunet@baylibre.com \
--cc=kernel@pengutronix.de \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pwm@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).