[PATCH v5 0/5] pwm: meson: dt-bindings fixup

From: Jerome Brunet <jbrunet@baylibre.com>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Neil Armstrong" <neil.armstrong@linaro.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-amlogic@lists.infradead.org, linux-pwm@vger.kernel.org,
	JunYi Zhao <junyi.zhao@amlogic.com>
Subject: [PATCH v5 0/5] pwm: meson: dt-bindings fixup
Date: Wed, 21 Feb 2024 16:11:46 +0100	[thread overview]
Message-ID: <20240221151154.26452-1-jbrunet@baylibre.com> (raw)

This patchset aims to:
* Fix the incorrect bindings for the s4 type of pwm that was introduced
  while converting the documentation from txt to yaml format.
* Introduce a new compatible for the existing PWMs to better describe the
  HW in DT, instead of describing driver settings.
* Make the introduction of a new pwm variant (s4) slightly easier.

Changes since v4 [4]:
 * Rebased on Uwe's pwm rework in pwm-next
 * Drop change to carry device data in drvdata
 * Make the length of parent name array fixed
 * Single allocation instead 3 for the internal clock elements
 * meson8-pwm-v2 and meson-pwm-s4 compatibles under an enum instead of
   2 const

Changes since v3 [3]:
 * Split first rework patch into 3 changes
 * Use dev_warn_once() to notify use of obsolete bindings
 * Rebased on Uwe dev_err_probe() change.

Changes since v2 [2]:
* Drop DTS changes. These will be re-submitted later on. Possibly after
  u-boot gets support for the new compatible to minimise conversion
  problems.
* Position deprecated property correctly in dt-bindings for the old
  meson8 type pwm bindings
* Reword commit description of patch #2 to make more obvious it does not
  introduce a new HW support but fixes a bad bindings.
* Dropped Rob's Reviewed-by on patch #2. It seemed appropriate considering
  the discussion on this change.

Changes since v1 [1]:
* Fix typo in the new binding compatible documentation
* Disallow clock-names for the new compatibles in the schema documenation

[1]: https://lore.kernel.org/linux-amlogic/20231106103259.703417-1-jbrunet@baylibre.com
[2]: https://lore.kernel.org/linux-amlogic/20231117125919.1696980-1-jbrunet@baylibre.com
[3]: https://lore.kernel.org/linux-amlogic/20231129134004.3642121-1-jbrunet@baylibre.com
[4]: https://lore.kernel.org/linux-amlogic/20231222111658.832167-1-jbrunet@baylibre.com

Jerome Brunet (5):
  dt-bindings: pwm: amlogic: fix s4 bindings
  dt-bindings: pwm: amlogic: Add a new binding for meson8 pwm types
  pwm: meson: generalize 4 inputs clock on meson8 pwm type
  pwm: meson: don't carry internal clock elements around
  pwm: meson: add generic compatible for meson8 to sm1

 .../devicetree/bindings/pwm/pwm-amlogic.yaml  | 115 ++++++-
 drivers/pwm/pwm-meson.c                       | 289 ++++++++++--------
 2 files changed, 260 insertions(+), 144 deletions(-)

-- 
2.43.0

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic