Linux-Amlogic Archive mirror
 help / color / mirror / Atom feed
From: Alexey Romanov <avromanov@salutedevices.com>
To: <neil.armstrong@linaro.org>, <clabbe@baylibre.com>,
	<herbert@gondor.apana.org.au>, <davem@davemloft.net>,
	<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
	<conor+dt@kernel.org>, <khilman@baylibre.com>,
	<jbrunet@baylibre.com>, <martin.blumenstingl@googlemail.com>
Cc: <linux-crypto@vger.kernel.org>,
	<linux-amlogic@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<kernel@salutedevices.com>,
	Alexey Romanov <avromanov@salutedevices.com>
Subject: [PATCH v3 01/20] drivers: crypto: meson: don't hardcode IRQ count
Date: Mon, 5 Feb 2024 18:55:02 +0300	[thread overview]
Message-ID: <20240205155521.1795552-2-avromanov@salutedevices.com> (raw)
In-Reply-To: <20240205155521.1795552-1-avromanov@salutedevices.com>

IRQ count is no longer hardcoded, and make it part of
struct meson_flow. We need this for extend driver support for
other Amlogic SoC's.

Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
---
 drivers/crypto/amlogic/amlogic-gxl-cipher.c |  2 +-
 drivers/crypto/amlogic/amlogic-gxl-core.c   | 47 ++++++++++++---------
 drivers/crypto/amlogic/amlogic-gxl.h        |  8 ++--
 3 files changed, 31 insertions(+), 26 deletions(-)

diff --git a/drivers/crypto/amlogic/amlogic-gxl-cipher.c b/drivers/crypto/amlogic/amlogic-gxl-cipher.c
index 29048da6f50a..b19032f92415 100644
--- a/drivers/crypto/amlogic/amlogic-gxl-cipher.c
+++ b/drivers/crypto/amlogic/amlogic-gxl-cipher.c
@@ -19,7 +19,7 @@
 
 static int get_engine_number(struct meson_dev *mc)
 {
-	return atomic_inc_return(&mc->flow) % MAXFLOW;
+	return atomic_inc_return(&mc->flow) % mc->flow_cnt;
 }
 
 static bool meson_cipher_need_fallback(struct skcipher_request *areq)
diff --git a/drivers/crypto/amlogic/amlogic-gxl-core.c b/drivers/crypto/amlogic/amlogic-gxl-core.c
index f54ab0d0b1e8..35ec64df5b3a 100644
--- a/drivers/crypto/amlogic/amlogic-gxl-core.c
+++ b/drivers/crypto/amlogic/amlogic-gxl-core.c
@@ -28,8 +28,8 @@ static irqreturn_t meson_irq_handler(int irq, void *data)
 	int flow;
 	u32 p;
 
-	for (flow = 0; flow < MAXFLOW; flow++) {
-		if (mc->irqs[flow] == irq) {
+	for (flow = 0; flow < mc->flow_cnt; flow++) {
+		if (mc->chanlist[flow].irq == irq) {
 			p = readl(mc->base + ((0x04 + flow) << 2));
 			if (p) {
 				writel_relaxed(0xF, mc->base + ((0x4 + flow) << 2));
@@ -110,7 +110,7 @@ static int meson_debugfs_show(struct seq_file *seq, void *v)
 	struct meson_dev *mc __maybe_unused = seq->private;
 	int i;
 
-	for (i = 0; i < MAXFLOW; i++)
+	for (i = 0; i < mc->flow_cnt; i++)
 		seq_printf(seq, "Channel %d: nreq %lu\n", i,
 #ifdef CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG
 			   mc->chanlist[i].stat_req);
@@ -153,14 +153,32 @@ static void meson_free_chanlist(struct meson_dev *mc, int i)
  */
 static int meson_allocate_chanlist(struct meson_dev *mc)
 {
+	struct platform_device *pdev = to_platform_device(mc->dev);
 	int i, err;
 
-	mc->chanlist = devm_kcalloc(mc->dev, MAXFLOW,
+	mc->flow_cnt = platform_irq_count(pdev);
+	if (mc->flow_cnt <= 0) {
+		dev_err(mc->dev, "No IRQs defined\n");
+		return -ENODEV;
+	}
+
+	mc->chanlist = devm_kcalloc(mc->dev, mc->flow_cnt,
 				    sizeof(struct meson_flow), GFP_KERNEL);
 	if (!mc->chanlist)
 		return -ENOMEM;
 
-	for (i = 0; i < MAXFLOW; i++) {
+	for (i = 0; i < mc->flow_cnt; i++) {
+		mc->chanlist[i].irq = platform_get_irq(pdev, i);
+		if (mc->chanlist[i].irq < 0)
+			return mc->chanlist[i].irq;
+
+		err = devm_request_irq(mc->dev, mc->chanlist[i].irq,
+				       meson_irq_handler, 0, "aml-crypto", mc);
+		if (err < 0) {
+			dev_err(mc->dev, "Cannot request IRQ for flow %d\n", i);
+			return err;
+		}
+
 		init_completion(&mc->chanlist[i].complete);
 
 		mc->chanlist[i].engine = crypto_engine_alloc_init(mc->dev, true);
@@ -230,7 +248,7 @@ static void meson_unregister_algs(struct meson_dev *mc)
 static int meson_crypto_probe(struct platform_device *pdev)
 {
 	struct meson_dev *mc;
-	int err, i;
+	int err;
 
 	mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
 	if (!mc)
@@ -252,19 +270,6 @@ static int meson_crypto_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	for (i = 0; i < MAXFLOW; i++) {
-		mc->irqs[i] = platform_get_irq(pdev, i);
-		if (mc->irqs[i] < 0)
-			return mc->irqs[i];
-
-		err = devm_request_irq(&pdev->dev, mc->irqs[i], meson_irq_handler, 0,
-				       "gxl-crypto", mc);
-		if (err < 0) {
-			dev_err(mc->dev, "Cannot request IRQ for flow %d\n", i);
-			return err;
-		}
-	}
-
 	err = clk_prepare_enable(mc->busclk);
 	if (err != 0) {
 		dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
@@ -294,7 +299,7 @@ static int meson_crypto_probe(struct platform_device *pdev)
 error_alg:
 	meson_unregister_algs(mc);
 error_flow:
-	meson_free_chanlist(mc, MAXFLOW - 1);
+	meson_free_chanlist(mc, mc->flow_cnt - 1);
 	clk_disable_unprepare(mc->busclk);
 	return err;
 }
@@ -309,7 +314,7 @@ static void meson_crypto_remove(struct platform_device *pdev)
 
 	meson_unregister_algs(mc);
 
-	meson_free_chanlist(mc, MAXFLOW - 1);
+	meson_free_chanlist(mc, mc->flow_cnt - 1);
 
 	clk_disable_unprepare(mc->busclk);
 }
diff --git a/drivers/crypto/amlogic/amlogic-gxl.h b/drivers/crypto/amlogic/amlogic-gxl.h
index 1013a666c932..79177cfa8b88 100644
--- a/drivers/crypto/amlogic/amlogic-gxl.h
+++ b/drivers/crypto/amlogic/amlogic-gxl.h
@@ -22,8 +22,6 @@
 #define MESON_OPMODE_ECB 0
 #define MESON_OPMODE_CBC 1
 
-#define MAXFLOW 2
-
 #define MAXDESC 64
 
 #define DESC_LAST BIT(18)
@@ -62,6 +60,7 @@ struct meson_desc {
  * @keylen:	keylen for this flow operation
  * @complete:	completion for the current task on this flow
  * @status:	set to 1 by interrupt if task is done
+ * @irq:	IRQ number for amlogic-crypto
  * @t_phy:	Physical address of task
  * @tl:		pointer to the current ce_task for this flow
  * @stat_req:	number of request done by this flow
@@ -70,6 +69,7 @@ struct meson_flow {
 	struct crypto_engine *engine;
 	struct completion complete;
 	int status;
+	int irq;
 	unsigned int keylen;
 	dma_addr_t t_phy;
 	struct meson_desc *tl;
@@ -85,7 +85,7 @@ struct meson_flow {
  * @dev:	the platform device
  * @chanlist:	array of all flow
  * @flow:	flow to use in next request
- * @irqs:	IRQ numbers for amlogic-crypto
+ * @flow_cnt:	flow count for amlogic-crypto
  * @dbgfs_dir:	Debugfs dentry for statistic directory
  * @dbgfs_stats: Debugfs dentry for statistic counters
  */
@@ -95,7 +95,7 @@ struct meson_dev {
 	struct device *dev;
 	struct meson_flow *chanlist;
 	atomic_t flow;
-	int irqs[MAXFLOW];
+	int flow_cnt;
 #ifdef CONFIG_CRYPTO_DEV_AMLOGIC_GXL_DEBUG
 	struct dentry *dbgfs_dir;
 #endif
-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2024-02-05 15:55 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-05 15:55 [PATCH v3 00/20] Support more Amlogic SoC families in crypto driver Alexey Romanov
2024-02-05 15:55 ` Alexey Romanov [this message]
2024-02-05 15:55 ` [PATCH v3 02/20] drviers: crypto: meson: add platform data Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 03/20] drivers: crypto: meson: make CLK controller optional Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 04/20] drivers: crypto: meson: add MMIO helpers Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 05/20] drivers: crypto: meson: move get_engine_number() Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 06/20] drivers: crypto: meson: drop status field from meson_flow Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 07/20] drivers: crypto: meson: move algs definition and cipher API to cipher.c Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 08/20] drivers: crypto: meson: cleanup defines Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 09/20] drivers: crypto: meson: process more than MAXDESCS descriptors Alexey Romanov
2024-02-06 13:13   ` neil.armstrong
2024-02-06 14:07   ` Vadim Fedorenko
2024-02-05 15:55 ` [PATCH v3 10/20] drivers: crypto: meson: avoid kzalloc in engine thread Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 11/20] drivers: crypto: meson: introduce hasher Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 12/20] drivers: crypto: meson: add support for AES-CTR Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 13/20] drivers: crypto: meson: use fallback for 192-bit keys Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 14/20] drivers: crypto: meson: add support for G12-series Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 15/20] drivers: crypto: meson: add support for AXG-series Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 16/20] dt-bindings: crypto: meson: support new SoC's Alexey Romanov
2024-02-08  8:38   ` Krzysztof Kozlowski
2024-02-05 15:55 ` [PATCH v3 17/20] arch: arm64: dts: meson: a1: add crypto node Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 18/20] arch: arm64: dts: meson: s4: " Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 19/20] arch: arm64: dts: meson: g12: " Alexey Romanov
2024-02-05 15:55 ` [PATCH v3 20/20] arch: arm64: dts: meson: axg: " Alexey Romanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240205155521.1795552-2-avromanov@salutedevices.com \
    --to=avromanov@salutedevices.com \
    --cc=clabbe@baylibre.com \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=jbrunet@baylibre.com \
    --cc=kernel@salutedevices.com \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).