From: Sean Christopherson <seanjc@google.com>
To: Yang Weijiang <weijiang.yang@intel.com>
Cc: pbonzini@redhat.com, dave.hansen@intel.com, x86@kernel.org,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
peterz@infradead.org, chao.gao@intel.com,
rick.p.edgecombe@intel.com, mlevitsk@redhat.com,
john.allen@amd.com
Subject: Re: [PATCH v10 26/27] KVM: nVMX: Enable CET support for nested guest
Date: Wed, 1 May 2024 16:23:28 -0700 [thread overview]
Message-ID: <ZjLO8FsnJ7NgED0G@google.com> (raw)
In-Reply-To: <20240219074733.122080-27-weijiang.yang@intel.com>
On Sun, Feb 18, 2024, Yang Weijiang wrote:
> @@ -2438,6 +2460,30 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct loaded_vmcs *vmcs0
> }
> }
>
> +static inline void cet_vmcs_fields_get(struct kvm_vcpu *vcpu, u64 *ssp,
> + u64 *s_cet, u64 *ssp_tbl)
> +{
> + if (guest_can_use(vcpu, X86_FEATURE_SHSTK)) {
> + *ssp = vmcs_readl(GUEST_SSP);
> + *s_cet = vmcs_readl(GUEST_S_CET);
> + *ssp_tbl = vmcs_readl(GUEST_INTR_SSP_TABLE);
> + } else if (guest_can_use(vcpu, X86_FEATURE_IBT)) {
> + *s_cet = vmcs_readl(GUEST_S_CET);
> + }
Same comments about accessing S_CET, please do so in a dedicated path.
> +}
> +
> +static inline void cet_vmcs_fields_put(struct kvm_vcpu *vcpu, u64 ssp,
> + u64 s_cet, u64 ssp_tbl)
This should probably use "set" instead of "put". I can't think of a single case
where KVM uses "put" to describe writing state, e.g. "put" is always used when
putting a reference or unloading state.
> +{
> + if (guest_can_use(vcpu, X86_FEATURE_SHSTK)) {
> + vmcs_writel(GUEST_SSP, ssp);
> + vmcs_writel(GUEST_S_CET, s_cet);
> + vmcs_writel(GUEST_INTR_SSP_TABLE, ssp_tbl);
> + } else if (guest_can_use(vcpu, X86_FEATURE_IBT)) {
> + vmcs_writel(GUEST_S_CET, s_cet);
> + }
And here.
next prev parent reply other threads:[~2024-05-01 23:23 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-19 7:47 [PATCH v10 00/27] Enable CET Virtualization Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 01/27] x86/fpu/xstate: Always preserve non-user xfeatures/flags in __state_perm Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 02/27] x86/fpu/xstate: Refine CET user xstate bit enabling Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 03/27] x86/fpu/xstate: Add CET supervisor mode state support Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 04/27] x86/fpu/xstate: Introduce XFEATURE_MASK_KERNEL_DYNAMIC xfeature set Yang Weijiang
2024-05-01 18:45 ` Sean Christopherson
2024-05-02 17:46 ` Dave Hansen
2024-05-07 22:57 ` Sean Christopherson
2024-05-07 23:17 ` Dave Hansen
2024-05-08 1:19 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 05/27] x86/fpu/xstate: Introduce fpu_guest_cfg for guest FPU configuration Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 06/27] x86/fpu/xstate: Create guest fpstate with guest specific config Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 07/27] x86/fpu/xstate: Warn if kernel dynamic xfeatures detected in normal fpstate Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 08/27] KVM: x86: Rework cpuid_get_supported_xcr0() to operate on vCPU data Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 09/27] KVM: x86: Rename kvm_{g,s}et_msr()* to menifest emulation operations Yang Weijiang
2024-05-01 18:54 ` Sean Christopherson
2024-05-06 5:58 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 10/27] KVM: x86: Refine xsave-managed guest register/MSR reset handling Yang Weijiang
2024-02-20 3:04 ` Chao Gao
2024-02-20 13:23 ` Yang, Weijiang
2024-05-01 20:40 ` Sean Christopherson
2024-05-06 7:26 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 11/27] KVM: x86: Add kvm_msr_{read,write}() helpers Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 12/27] KVM: x86: Report XSS as to-be-saved if there are supported features Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 13/27] KVM: x86: Refresh CPUID on write to guest MSR_IA32_XSS Yang Weijiang
2024-02-20 8:51 ` Chao Gao
2024-05-01 20:43 ` Sean Christopherson
2024-05-06 7:30 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 14/27] KVM: x86: Initialize kvm_caps.supported_xss Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 15/27] KVM: x86: Load guest FPU state when access XSAVE-managed MSRs Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 16/27] KVM: x86: Add fault checks for guest CR4.CET setting Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 17/27] KVM: x86: Report KVM supported CET MSRs as to-be-saved Yang Weijiang
2024-05-01 22:40 ` Sean Christopherson
2024-05-06 8:31 ` Yang, Weijiang
2024-05-07 17:27 ` Sean Christopherson
2024-05-08 7:00 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 18/27] KVM: VMX: Introduce CET VMCS fields and control bits Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 19/27] KVM: x86: Use KVM-governed feature framework to track "SHSTK/IBT enabled" Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 20/27] KVM: VMX: Emulate read and write to CET MSRs Yang Weijiang
2024-03-12 22:55 ` Sean Christopherson
2024-03-13 9:43 ` Yang, Weijiang
2024-03-13 16:00 ` Sean Christopherson
2024-02-19 7:47 ` [PATCH v10 21/27] KVM: x86: Save and reload SSP to/from SMRAM Yang Weijiang
2024-05-01 22:50 ` Sean Christopherson
2024-05-06 8:41 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 22/27] KVM: VMX: Set up interception for CET MSRs Yang Weijiang
2024-05-01 23:07 ` Sean Christopherson
2024-05-06 8:48 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 23/27] KVM: VMX: Set host constant supervisor states to VMCS fields Yang Weijiang
2024-02-19 7:47 ` [PATCH v10 24/27] KVM: x86: Enable CET virtualization for VMX and advertise to userspace Yang Weijiang
2024-05-01 23:15 ` Sean Christopherson
2024-05-01 23:24 ` Edgecombe, Rick P
2024-05-06 9:19 ` Yang, Weijiang
2024-05-06 16:54 ` Sean Christopherson
2024-05-07 2:37 ` Yang, Weijiang
2024-05-06 17:05 ` Edgecombe, Rick P
2024-05-06 23:33 ` Sean Christopherson
2024-05-06 23:53 ` Edgecombe, Rick P
2024-05-07 14:21 ` Sean Christopherson
2024-05-07 14:45 ` Edgecombe, Rick P
2024-05-07 15:08 ` Sean Christopherson
2024-05-07 15:33 ` Edgecombe, Rick P
2024-05-16 7:13 ` Yang, Weijiang
2024-05-16 14:39 ` Sean Christopherson
2024-05-16 15:36 ` Dave Hansen
2024-05-16 16:58 ` Sean Christopherson
2024-05-17 8:27 ` Yang, Weijiang
2024-05-17 8:57 ` Thomas Gleixner
2024-05-17 14:26 ` Sean Christopherson
2024-05-20 9:43 ` Yang, Weijiang
2024-05-20 17:09 ` Sean Christopherson
2024-05-20 17:15 ` Dave Hansen
2024-05-22 9:03 ` Yang, Weijiang
2024-05-22 15:06 ` Edgecombe, Rick P
2024-05-23 10:07 ` Yang, Weijiang
2024-05-22 8:41 ` Yang, Weijiang
2024-05-27 9:05 ` Yang, Weijiang
2024-05-01 23:34 ` Sean Christopherson
2024-05-06 9:41 ` Yang, Weijiang
2024-05-16 7:20 ` Yang, Weijiang
2024-05-16 14:43 ` Sean Christopherson
2024-05-17 8:04 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 25/27] KVM: nVMX: Introduce new VMX_BASIC bit for event error_code delivery to L1 Yang Weijiang
2024-05-01 23:19 ` Sean Christopherson
2024-05-06 9:19 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 26/27] KVM: nVMX: Enable CET support for nested guest Yang Weijiang
2024-05-01 23:23 ` Sean Christopherson [this message]
2024-05-06 9:25 ` Yang, Weijiang
2024-02-19 7:47 ` [PATCH v10 27/27] KVM: x86: Don't emulate instructions guarded by CET Yang Weijiang
2024-05-01 23:24 ` Sean Christopherson
2024-05-06 9:26 ` Yang, Weijiang
2024-03-06 14:44 ` [PATCH v10 00/27] Enable CET Virtualization Yang, Weijiang
2024-05-01 23:27 ` Sean Christopherson
2024-05-06 9:31 ` Yang, Weijiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZjLO8FsnJ7NgED0G@google.com \
--to=seanjc@google.com \
--cc=chao.gao@intel.com \
--cc=dave.hansen@intel.com \
--cc=john.allen@amd.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mlevitsk@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=rick.p.edgecombe@intel.com \
--cc=weijiang.yang@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).