From: Nicholas Piggin <npiggin@gmail.com>
To: Thomas Huth <thuth@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>,
Laurent Vivier <lvivier@redhat.com>,
Andrew Jones <andrew.jones@linux.dev>,
linuxppc-dev@lists.ozlabs.org, kvm@vger.kernel.org
Subject: [kvm-unit-tests PATCH v9 11/31] powerpc/sprs: Test hypervisor registers on powernv machine
Date: Sat, 4 May 2024 22:28:17 +1000 [thread overview]
Message-ID: <20240504122841.1177683-12-npiggin@gmail.com> (raw)
In-Reply-To: <20240504122841.1177683-1-npiggin@gmail.com>
This enables HV privilege registers to be tested with the powernv
machine.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
powerpc/sprs.c | 33 +++++++++++++++++++++++++--------
1 file changed, 25 insertions(+), 8 deletions(-)
diff --git a/powerpc/sprs.c b/powerpc/sprs.c
index c25dac1f6..de9e87a21 100644
--- a/powerpc/sprs.c
+++ b/powerpc/sprs.c
@@ -199,16 +199,16 @@ static const struct spr sprs_power_common[1024] = {
[190] = { "HFSCR", 64, HV_RW, },
[256] = { "VRSAVE", 32, RW, },
[259] = { "SPRG3", 64, RO, },
-[284] = { "TBL", 32, HV_WO, },
-[285] = { "TBU", 32, HV_WO, },
-[286] = { "TBU40", 64, HV_WO, },
+[284] = { "TBL", 32, HV_WO, }, /* Things can go a bit wonky with */
+[285] = { "TBU", 32, HV_WO, }, /* Timebase changing. Should save */
+[286] = { "TBU40", 64, HV_WO, }, /* and restore it. */
[304] = { "HSPRG0", 64, HV_RW, },
[305] = { "HSPRG1", 64, HV_RW, },
[306] = { "HDSISR", 32, HV_RW, SPR_INT, },
[307] = { "HDAR", 64, HV_RW, SPR_INT, },
[308] = { "SPURR", 64, HV_RW | OS_RO, SPR_ASYNC, },
[309] = { "PURR", 64, HV_RW | OS_RO, SPR_ASYNC, },
-[313] = { "HRMOR", 64, HV_RW, },
+[313] = { "HRMOR", 64, HV_RW, SPR_HARNESS, }, /* Harness can't cope with HRMOR changing */
[314] = { "HSRR0", 64, HV_RW, SPR_INT, },
[315] = { "HSRR1", 64, HV_RW, SPR_INT, },
[318] = { "LPCR", 64, HV_RW, },
@@ -306,7 +306,7 @@ static const struct spr sprs_power9_10[1024] = {
[921] = { "TSCR", 32, HV_RW, },
[922] = { "TTR", 64, HV_RW, },
[1006]= { "TRACE", 64, WO, },
-[1008]= { "HID", 64, HV_RW, },
+[1008]= { "HID", 64, HV_RW, SPR_HARNESS, }, /* HILE would be unhelpful to change */
};
/* This covers POWER8 and POWER9 PMUs */
@@ -350,6 +350,22 @@ static const struct spr sprs_power10_pmu[1024] = {
static struct spr sprs[1024];
+static bool spr_read_perms(int spr)
+{
+ if (cpu_has_hv)
+ return !!(sprs[spr].access & SPR_HV_READ);
+ else
+ return !!(sprs[spr].access & SPR_OS_READ);
+}
+
+static bool spr_write_perms(int spr)
+{
+ if (cpu_has_hv)
+ return !!(sprs[spr].access & SPR_HV_WRITE);
+ else
+ return !!(sprs[spr].access & SPR_OS_WRITE);
+}
+
static void setup_sprs(void)
{
int i;
@@ -461,7 +477,7 @@ static void get_sprs(uint64_t *v)
int i;
for (i = 0; i < 1024; i++) {
- if (!(sprs[i].access & SPR_OS_READ))
+ if (!spr_read_perms(i))
continue;
v[i] = __mfspr(i);
}
@@ -472,8 +488,9 @@ static void set_sprs(uint64_t val)
int i;
for (i = 0; i < 1024; i++) {
- if (!(sprs[i].access & SPR_OS_WRITE))
+ if (!spr_write_perms(i))
continue;
+
if (sprs[i].type & SPR_HARNESS)
continue;
__mtspr(i, val);
@@ -561,7 +578,7 @@ int main(int argc, char **argv)
for (i = 0; i < 1024; i++) {
bool pass = true;
- if (!(sprs[i].access & SPR_OS_READ))
+ if (!spr_read_perms(i))
continue;
if (sprs[i].width == 32) {
--
2.43.0
next prev parent reply other threads:[~2024-05-04 12:29 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-04 12:28 [kvm-unit-tests PATCH v9 00/31] powerpc improvements Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 01/31] doc: update unittests doc Nicholas Piggin
2024-05-06 7:03 ` Thomas Huth
2024-05-07 3:57 ` Nicholas Piggin
2024-05-06 8:02 ` Andrew Jones
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 02/31] report: Add known failure reporting option Nicholas Piggin
2024-05-06 7:25 ` Thomas Huth
2024-05-06 8:01 ` Andrew Jones
2024-05-06 10:19 ` Thomas Huth
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 03/31] powerpc: Mark known failing tests as kfail Nicholas Piggin
2024-05-06 7:37 ` Thomas Huth
2024-05-07 4:07 ` Nicholas Piggin
2024-05-07 11:44 ` Thomas Huth
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 04/31] powerpc: Update unittests for latest QEMU version Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 05/31] powerpc/sprs: Specify SPRs with data rather than code Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 06/31] powerpc/sprs: Avoid taking PMU interrupts caused by register fuzzing Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 07/31] scripts: allow machine option to be specified in unittests.cfg Nicholas Piggin
2024-05-07 15:08 ` Thomas Huth
2024-05-08 12:27 ` Nicholas Piggin
2024-05-08 12:55 ` Thomas Huth
2024-05-08 12:58 ` Thomas Huth
2024-05-08 13:36 ` Thomas Huth
2024-05-09 5:44 ` Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 08/31] scripts: Accommodate powerpc powernv machine differences Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 09/31] powerpc: Support powernv machine with QEMU TCG Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 10/31] powerpc: Fix emulator illegal instruction test for powernv Nicholas Piggin
2024-05-04 12:28 ` Nicholas Piggin [this message]
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 12/31] powerpc: general interrupt tests Nicholas Piggin
2024-05-07 12:12 ` Thomas Huth
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 13/31] powerpc: Add rtas stop-self support Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 14/31] powerpc: Remove broken SMP exception stack setup Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 15/31] powerpc: Enable page alloc operations Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 16/31] powerpc: add SMP and IPI support Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 17/31] powerpc: Add cpu_relax Nicholas Piggin
2024-05-07 13:44 ` Thomas Huth
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 18/31] powerpc: Permit ACCEL=tcg,thread=single Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 19/31] powerpc: Avoid using larx/stcx. in spinlocks when only one CPU is running Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 20/31] powerpc: Add atomics tests Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 21/31] powerpc: Add timebase tests Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 22/31] powerpc: Add MMU support Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 23/31] common/sieve: Use vmalloc.h for setup_mmu definition Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 24/31] common/sieve: Support machines without MMU Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 25/31] powerpc: Add sieve.c common test Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 26/31] powerpc: add usermode support Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 27/31] powerpc: add pmu tests Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 28/31] configure: Make arch_libdir a first-class entity Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 29/31] powerpc: Remove remnants of ppc64 directory and build structure Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 30/31] powerpc: Add facility to query TCG or KVM host Nicholas Piggin
2024-05-04 12:28 ` [kvm-unit-tests PATCH v9 31/31] powerpc: gitlab CI update Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240504122841.1177683-12-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=andrew.jones@linux.dev \
--cc=kvm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lvivier@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).