From: maobibo <maobibo@loongson.cn>
To: Song Gao <gaosong@loongson.cn>, Markus.Elfring@web.de
Cc: pbonzini@redhat.com, zhaotianrui@loongson.cn,
chenhuacai@kernel.org, kernel@xen0n.name,
loongarch@lists.linux.dev, linux-kernel@vger.kernel.org,
kernel-janitors@vger.kernel.org
Subject: Re: [PATCH v4] LoongArch: KVM: Add PMU support
Date: Tue, 30 Apr 2024 09:57:03 +0800 [thread overview]
Message-ID: <67c04cb3-abd5-fd63-2717-b9b6ec7521df@loongson.cn> (raw)
In-Reply-To: <20240429093401.2612430-1-gaosong@loongson.cn>
On 2024/4/29 下午5:34, Song Gao wrote:
> On LoongArch, the host and guest have their own PMU CSRs registers
> and they share PMU hardware resources. A set of PMU CSRs consists of
> a CTRL register and a CNTR register. We can set which PMU CSRs are used
> by the guest by writing to the GCFG register [24: 26] bits.
>
> On KVM side. we save the host PMU CSRs into structure kvm_context.
> If the host supports the PMU feature. When entering guest mode.
> we save the host PMU CSRs and restore the guest PMU CSRs. When exiting
> guest mode, we save the guest PMU CSRs and restore the host PMU CSRs.
>
> Signed-off-by: Song Gao <gaosong@loongson.cn>
> ---
>
> V4:
> - Use the macro kvm_read_clear_hw_gcsr to optimize the code
> and remove redundant code.
> - Link to V3: https://lore.kernel.org/all/20240424091813.1471440-1-gaosong@loongson.cn/
>
> V3:
> - When saving the PMU context, clear the CTRL register
> before reading the CNTR register.
> - Put kvm_lose_pmu() in kvm_handler_exit().
> - Link to V2: https://lore.kernel.org/all/20240417065236.500011-1-gaosong@loongson.cn/
>
> V2:
> - Add new vcpu->request flag KVM_REQ_PMU. If we use PMU,
> We need to set this flag;
> - Add kvm_check_pmu() to kvm_pre_enter_guest();
> - On _kvm_setcsr(), after modifying the PMU CSR register value,
> if we use PMU, we need to set KVM_REQ_PMU.
> - Link to V1: https://lore.kernel.org/all/20240410095812.2943706-1-gaosong@loongson.cn/
>
> ---
>
> arch/loongarch/include/asm/kvm_csr.h | 7 +
> arch/loongarch/include/asm/kvm_host.h | 20 +++
> arch/loongarch/include/asm/loongarch.h | 1 +
> arch/loongarch/kvm/exit.c | 8 ++
> arch/loongarch/kvm/vcpu.c | 173 ++++++++++++++++++++++++-
> 5 files changed, 207 insertions(+), 2 deletions(-)
>
> diff --git a/arch/loongarch/include/asm/kvm_csr.h b/arch/loongarch/include/asm/kvm_csr.h
> index 724ca8b7b401..0a52f115a87e 100644
> --- a/arch/loongarch/include/asm/kvm_csr.h
> +++ b/arch/loongarch/include/asm/kvm_csr.h
> @@ -30,6 +30,7 @@
> : [val] "+r" (__v) \
> : [reg] "i" (csr) \
> : "memory"); \
> + __v; \
> })
>
> #define gcsr_xchg(v, m, csr) \
> @@ -180,6 +181,7 @@ __BUILD_GCSR_OP(tlbidx)
>
> #define kvm_save_hw_gcsr(csr, gid) (csr->csrs[gid] = gcsr_read(gid))
> #define kvm_restore_hw_gcsr(csr, gid) (gcsr_write(csr->csrs[gid], gid))
> +#define kvm_read_clear_hw_gcsr(csr, gid) (csr->csrs[gid] = gcsr_write(0, gid))
>
> int kvm_emu_iocsr(larch_inst inst, struct kvm_run *run, struct kvm_vcpu *vcpu);
>
> @@ -208,4 +210,9 @@ static __always_inline void kvm_change_sw_gcsr(struct loongarch_csrs *csr,
> csr->csrs[gid] |= val & _mask;
> }
>
> +#define KVM_PMU_EVENT_ENABLED (CSR_PERFCTRL_PLV0 | \
> + CSR_PERFCTRL_PLV1 | \
> + CSR_PERFCTRL_PLV2 | \
> + CSR_PERFCTRL_PLV3)
> +
> #endif /* __ASM_LOONGARCH_KVM_CSR_H__ */
> diff --git a/arch/loongarch/include/asm/kvm_host.h b/arch/loongarch/include/asm/kvm_host.h
> index 2d62f7b0d377..e1d64e26e7cb 100644
> --- a/arch/loongarch/include/asm/kvm_host.h
> +++ b/arch/loongarch/include/asm/kvm_host.h
> @@ -51,9 +51,14 @@ struct kvm_arch_memory_slot {
> unsigned long flags;
> };
>
> +#define KVM_REQ_PMU KVM_ARCH_REQ(0)
> +#define HOST_MAX_PMNUM 16
> struct kvm_context {
> unsigned long vpid_cache;
> struct kvm_vcpu *last_vcpu;
> + /* Save host pmu csr */
> + u64 perf_ctrl[HOST_MAX_PMNUM];
> + u64 perf_cntr[HOST_MAX_PMNUM];
> };
>
> struct kvm_world_switch {
> @@ -99,6 +104,8 @@ enum emulation_result {
> #define KVM_LARCH_LASX (0x1 << 2)
> #define KVM_LARCH_SWCSR_LATEST (0x1 << 3)
> #define KVM_LARCH_HWCSR_USABLE (0x1 << 4)
> +#define KVM_GUEST_PMU_ENABLE (0x1 << 5)
> +#define KVM_GUEST_PMU_ACTIVE (0x1 << 6)
>
> struct kvm_vcpu_arch {
> /*
> @@ -136,6 +143,9 @@ struct kvm_vcpu_arch {
> /* CSR state */
> struct loongarch_csrs *csr;
>
> + /* Guest max PMU CSR id */
> + int max_pmu_csrid;
> +
> /* GPR used as IO source/target */
> u32 io_gpr;
>
> @@ -195,6 +205,16 @@ static inline bool kvm_guest_has_lasx(struct kvm_vcpu_arch *arch)
> return arch->cpucfg[2] & CPUCFG2_LASX;
> }
>
> +static inline bool kvm_guest_has_pmu(struct kvm_vcpu_arch *arch)
> +{
> + return arch->cpucfg[LOONGARCH_CPUCFG6] & CPUCFG6_PMP;
> +}
> +
> +static inline int kvm_get_pmu_num(struct kvm_vcpu_arch *arch)
> +{
> + return (arch->cpucfg[LOONGARCH_CPUCFG6] & CPUCFG6_PMNUM) >> CPUCFG6_PMNUM_SHIFT;
> +}
> +
> /* Debug: dump vcpu state */
> int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu);
>
> diff --git a/arch/loongarch/include/asm/loongarch.h b/arch/loongarch/include/asm/loongarch.h
> index 46366e783c84..644380b6ebec 100644
> --- a/arch/loongarch/include/asm/loongarch.h
> +++ b/arch/loongarch/include/asm/loongarch.h
> @@ -119,6 +119,7 @@
> #define CPUCFG6_PMP BIT(0)
> #define CPUCFG6_PAMVER GENMASK(3, 1)
> #define CPUCFG6_PMNUM GENMASK(7, 4)
> +#define CPUCFG6_PMNUM_SHIFT 4
> #define CPUCFG6_PMBITS GENMASK(13, 8)
> #define CPUCFG6_UPM BIT(14)
>
> diff --git a/arch/loongarch/kvm/exit.c b/arch/loongarch/kvm/exit.c
> index ed1d89d53e2e..636cd1500135 100644
> --- a/arch/loongarch/kvm/exit.c
> +++ b/arch/loongarch/kvm/exit.c
> @@ -83,6 +83,14 @@ static int kvm_handle_csr(struct kvm_vcpu *vcpu, larch_inst inst)
> rj = inst.reg2csr_format.rj;
> csrid = inst.reg2csr_format.csr;
>
> + if (csrid >= LOONGARCH_CSR_PERFCTRL0 && csrid <= vcpu->arch.max_pmu_csrid) {
> + if (kvm_guest_has_pmu(&vcpu->arch)) {
> + vcpu->arch.pc -= 4;
> + kvm_make_request(KVM_REQ_PMU, vcpu);
> + return EMULATE_DONE;
> + }
> + }
> +
> /* Process CSR ops */
> switch (rj) {
> case 0: /* process csrrd */
> diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c
> index 3a8779065f73..6cef0fb6a2bd 100644
> --- a/arch/loongarch/kvm/vcpu.c
> +++ b/arch/loongarch/kvm/vcpu.c
> @@ -30,6 +30,131 @@ const struct kvm_stats_header kvm_vcpu_stats_header = {
> sizeof(kvm_vcpu_stats_desc),
> };
>
> +static inline void kvm_save_host_pmu(struct kvm_vcpu *vcpu)
> +{
> + struct kvm_context *context;
> +
> + context = this_cpu_ptr(vcpu->kvm->arch.vmcs);
> + context->perf_ctrl[0] = write_csr_perfctrl0(0);
> + context->perf_ctrl[1] = write_csr_perfctrl1(0);
> + context->perf_ctrl[2] = write_csr_perfctrl2(0);
> + context->perf_ctrl[3] = write_csr_perfctrl3(0);
> + context->perf_cntr[0] = read_csr_perfcntr0();
> + context->perf_cntr[1] = read_csr_perfcntr1();
> + context->perf_cntr[2] = read_csr_perfcntr2();
> + context->perf_cntr[3] = read_csr_perfcntr3();
> +}
> +
> +static inline void kvm_restore_host_pmu(struct kvm_vcpu *vcpu)
> +{
> + struct kvm_context *context;
> +
> + context = this_cpu_ptr(vcpu->kvm->arch.vmcs);
> + write_csr_perfctrl0(context->perf_ctrl[0]);
> + write_csr_perfcntr0(context->perf_cntr[0]);
We have discussed before. It is safer that perf counter register is
restored before perf control register:)
If perf control is enabled, HW will update perf counter register, there
will be potential confliction if SW update perf counter register.
> + write_csr_perfctrl1(context->perf_ctrl[1]);
> + write_csr_perfcntr1(context->perf_cntr[1]);
> + write_csr_perfctrl2(context->perf_ctrl[2]);
> + write_csr_perfcntr2(context->perf_cntr[2]);
> + write_csr_perfctrl3(context->perf_ctrl[3]);
> + write_csr_perfcntr3(context->perf_cntr[3]);
> +}
> +
> +
> +static inline void kvm_save_guest_pmu(struct kvm_vcpu *vcpu)
> +{
> + struct loongarch_csrs *csr = vcpu->arch.csr;
> +
> + kvm_read_clear_hw_gcsr(csr, LOONGARCH_CSR_PERFCTRL0);
> + kvm_read_clear_hw_gcsr(csr, LOONGARCH_CSR_PERFCTRL1);
> + kvm_read_clear_hw_gcsr(csr, LOONGARCH_CSR_PERFCTRL2);
> + kvm_read_clear_hw_gcsr(csr, LOONGARCH_CSR_PERFCTRL3);
> + kvm_save_hw_gcsr(csr, LOONGARCH_CSR_PERFCNTR0);
> + kvm_save_hw_gcsr(csr, LOONGARCH_CSR_PERFCNTR1);
> + kvm_save_hw_gcsr(csr, LOONGARCH_CSR_PERFCNTR2);
> + kvm_save_hw_gcsr(csr, LOONGARCH_CSR_PERFCNTR3);
> +}
> +
> +static inline void kvm_restore_guest_pmu(struct kvm_vcpu *vcpu)
> +{
> + struct loongarch_csrs *csr = vcpu->arch.csr;
> +
> + kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_PERFCTRL0);
> + kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_PERFCNTR0);
Ditto, the same with kvm_restore_host_pmu().
Regards
Bibo Mao
> + kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_PERFCTRL1);
> + kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_PERFCNTR1);
> + kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_PERFCTRL2);
> + kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_PERFCNTR2);
> + kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_PERFCTRL3);
> + kvm_restore_hw_gcsr(csr, LOONGARCH_CSR_PERFCNTR3);
> +}
> +
> +static void kvm_lose_pmu(struct kvm_vcpu *vcpu)
> +{
> + unsigned long val;
> + struct loongarch_csrs *csr = vcpu->arch.csr;
> +
> + if (!(vcpu->arch.aux_inuse & KVM_GUEST_PMU_ENABLE))
> + return;
> + if (!(vcpu->arch.aux_inuse & KVM_GUEST_PMU_ACTIVE))
> + return;
> +
> + kvm_save_guest_pmu(vcpu);
> + /* Disable pmu access from guest */
> + write_csr_gcfg(read_csr_gcfg() & ~CSR_GCFG_GPERF);
> +
> + /*
> + * Clear KVM_GUEST_PMU_ENABLE if the guest is not using PMU CSRs
> + * when exiting the guest, so that the next time trap into the guest.
> + * we don't need to deal with PMU CSRs contexts.
> + */
> + val = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL0);
> + val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL1);
> + val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL2);
> + val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL3);
> + if (!(val & KVM_PMU_EVENT_ENABLED))
> + vcpu->arch.aux_inuse &= ~KVM_GUEST_PMU_ENABLE;
> + kvm_restore_host_pmu(vcpu);
> +
> + /* KVM_GUEST_PMU_ACTIVE needs to be cleared when exiting the guest */
> + vcpu->arch.aux_inuse &= ~KVM_GUEST_PMU_ACTIVE;
> +}
> +
> +static void kvm_own_pmu(struct kvm_vcpu *vcpu)
> +{
> + unsigned long val;
> +
> + kvm_save_host_pmu(vcpu);
> + /* Set PM0-PM(num) to guest */
> + val = read_csr_gcfg() & ~CSR_GCFG_GPERF;
> + val |= (kvm_get_pmu_num(&vcpu->arch) + 1) << CSR_GCFG_GPERF_SHIFT;
> + write_csr_gcfg(val);
> + kvm_restore_guest_pmu(vcpu);
> +}
> +
> +static void kvm_restore_pmu(struct kvm_vcpu *vcpu)
> +{
> + if (!(vcpu->arch.aux_inuse & KVM_GUEST_PMU_ENABLE))
> + return;
> +
> + kvm_make_request(KVM_REQ_PMU, vcpu);
> +}
> +
> +static void kvm_check_pmu(struct kvm_vcpu *vcpu)
> +{
> + if (!kvm_check_request(KVM_REQ_PMU, vcpu))
> + return;
> +
> + kvm_own_pmu(vcpu);
> +
> + /*
> + * Set KVM_GUEST PMU_ENABLE and GUEST_PMU_ACTIVE
> + * when guest has KVM_REQ_PMU request.
> + */
> + vcpu->arch.aux_inuse |= KVM_GUEST_PMU_ENABLE;
> + vcpu->arch.aux_inuse |= KVM_GUEST_PMU_ACTIVE;
> +}
> +
> /*
> * kvm_check_requests - check and handle pending vCPU requests
> *
> @@ -100,6 +225,7 @@ static int kvm_pre_enter_guest(struct kvm_vcpu *vcpu)
> /* Make sure the vcpu mode has been written */
> smp_store_mb(vcpu->mode, IN_GUEST_MODE);
> kvm_check_vpid(vcpu);
> + kvm_check_pmu(vcpu);
> vcpu->arch.host_eentry = csr_read64(LOONGARCH_CSR_EENTRY);
> /* Clear KVM_LARCH_SWCSR_LATEST as CSR will change when enter guest */
> vcpu->arch.aux_inuse &= ~KVM_LARCH_SWCSR_LATEST;
> @@ -130,6 +256,8 @@ static int kvm_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu)
> /* Set a default exit reason */
> run->exit_reason = KVM_EXIT_UNKNOWN;
>
> + kvm_lose_pmu(vcpu);
> +
> guest_timing_exit_irqoff();
> guest_state_exit_irqoff();
> local_irq_enable();
> @@ -295,6 +423,21 @@ static int _kvm_setcsr(struct kvm_vcpu *vcpu, unsigned int id, u64 val)
>
> kvm_write_sw_gcsr(csr, id, val);
>
> + /*
> + * After modifying the PMU CSR register value of the vcpu.
> + * If the PMU CSRs are used, we need to set KVM_REQ_PMU.
> + */
> + if (id >= LOONGARCH_CSR_PERFCTRL0 && id <= LOONGARCH_CSR_PERFCNTR3) {
> + unsigned long val;
> +
> + val = kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL0);
> + val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL1);
> + val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL2);
> + val |= kvm_read_sw_gcsr(csr, LOONGARCH_CSR_PERFCTRL3);
> + if (val & KVM_PMU_EVENT_ENABLED)
> + kvm_make_request(KVM_REQ_PMU, vcpu);
> + }
> +
> return ret;
> }
>
> @@ -333,6 +476,12 @@ static int _kvm_get_cpucfg_mask(int id, u64 *v)
> case LOONGARCH_CPUCFG5:
> *v = GENMASK(31, 0);
> return 0;
> + case LOONGARCH_CPUCFG6:
> + if (cpu_has_pmp)
> + *v = GENMASK(14, 0);
> + else
> + *v = 0;
> + return 0;
> case LOONGARCH_CPUCFG16:
> *v = GENMASK(16, 0);
> return 0;
> @@ -351,7 +500,7 @@ static int _kvm_get_cpucfg_mask(int id, u64 *v)
>
> static int kvm_check_cpucfg(int id, u64 val)
> {
> - int ret;
> + int ret, host;
> u64 mask = 0;
>
> ret = _kvm_get_cpucfg_mask(id, &mask);
> @@ -377,6 +526,18 @@ static int kvm_check_cpucfg(int id, u64 val)
> /* LASX architecturally implies LSX and FP but val does not satisfy that */
> return -EINVAL;
> return 0;
> + case LOONGARCH_CPUCFG6:
> + if (val & CPUCFG6_PMP) {
> + host = read_cpucfg(LOONGARCH_CPUCFG6);
> + if ((val & CPUCFG6_PMBITS) != (host & CPUCFG6_PMBITS))
> + /* Guest pmbits must be the same with host */
> + return -EINVAL;
> + if ((val & CPUCFG6_PMNUM) > (host & CPUCFG6_PMNUM))
> + return -EINVAL;
> + if ((val & CPUCFG6_UPM) && !(host & CPUCFG6_UPM))
> + return -EINVAL;
> + }
> + return 0;
> default:
> /*
> * Values for the other CPUCFG IDs are not being further validated
> @@ -459,6 +620,10 @@ static int kvm_set_one_reg(struct kvm_vcpu *vcpu,
> if (ret)
> break;
> vcpu->arch.cpucfg[id] = (u32)v;
> + if (id == LOONGARCH_CPUCFG6) {
> + vcpu->arch.max_pmu_csrid = LOONGARCH_CSR_PERFCTRL0 +
> + 2 * kvm_get_pmu_num(&vcpu->arch) + 1;
> + }
> break;
> case KVM_REG_LOONGARCH_KVM:
> switch (reg->id) {
> @@ -552,7 +717,8 @@ static int kvm_loongarch_cpucfg_has_attr(struct kvm_vcpu *vcpu,
> struct kvm_device_attr *attr)
> {
> switch (attr->attr) {
> - case 2:
> + case LOONGARCH_CPUCFG2:
> + case LOONGARCH_CPUCFG6:
> return 0;
> default:
> return -ENXIO;
> @@ -982,6 +1148,9 @@ static int _kvm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
> /* Control guest page CCA attribute */
> change_csr_gcfg(CSR_GCFG_MATC_MASK, CSR_GCFG_MATC_ROOT);
>
> + /* Restore hardware PMU CSRs */
> + kvm_restore_pmu(vcpu);
> +
> /* Don't bother restoring registers multiple times unless necessary */
> if (vcpu->arch.aux_inuse & KVM_LARCH_HWCSR_USABLE)
> return 0;
>
prev parent reply other threads:[~2024-04-30 1:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-29 9:34 [PATCH v4] LoongArch: KVM: Add PMU support Song Gao
2024-04-29 11:06 ` Markus Elfring
2024-04-30 1:57 ` maobibo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=67c04cb3-abd5-fd63-2717-b9b6ec7521df@loongson.cn \
--to=maobibo@loongson.cn \
--cc=Markus.Elfring@web.de \
--cc=chenhuacai@kernel.org \
--cc=gaosong@loongson.cn \
--cc=kernel-janitors@vger.kernel.org \
--cc=kernel@xen0n.name \
--cc=linux-kernel@vger.kernel.org \
--cc=loongarch@lists.linux.dev \
--cc=pbonzini@redhat.com \
--cc=zhaotianrui@loongson.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).