Intel-GFX Archive mirror
 help / color / mirror / Atom feed
From: "Manna, Animesh" <animesh.manna@intel.com>
To: "Hogander, Jouni" <jouni.hogander@intel.com>,
	"intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>
Cc: "dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	"Murthy, Arun R" <arun.r.murthy@intel.com>,
	"Nikula, Jani" <jani.nikula@intel.com>
Subject: RE: [PATCH v4 4/6] drm/i915/alpm: Add compute config for lobf
Date: Mon, 13 May 2024 11:22:32 +0000	[thread overview]
Message-ID: <PH7PR11MB59815A85BEFD5FDC22798B68F9E22@PH7PR11MB5981.namprd11.prod.outlook.com> (raw)
In-Reply-To: <f45895701e1a6d80b163fe89b3fe5995eb38bf90.camel@intel.com>



> -----Original Message-----
> From: Hogander, Jouni <jouni.hogander@intel.com>
> Sent: Monday, May 13, 2024 1:02 PM
> To: Manna, Animesh <animesh.manna@intel.com>; intel-
> gfx@lists.freedesktop.org
> Cc: dri-devel@lists.freedesktop.org; Murthy, Arun R
> <arun.r.murthy@intel.com>; Nikula, Jani <jani.nikula@intel.com>
> Subject: Re: [PATCH v4 4/6] drm/i915/alpm: Add compute config for lobf
> 
> On Thu, 2024-05-09 at 11:01 +0530, Animesh Manna wrote:
> > Link Off Between Active Frames, is a new feature for eDP that allows
> > the panel to go to lower power state after transmission of data. This
> > is a feature on top of ALPM, AS SDP.
> > Add compute config during atomic-check phase.
> >
> > v1: RFC version.
> > v2: Add separate flag for auxless-alpm. [Jani]
> > v3:
> > - intel_dp->lobf_supported replaced with crtc_state->has_lobf.
> > [Jouni]
> > - Add DISPLAY_VER() check. [Jouni]
> > - Modify function name of get_aux_less_status. [Jani]
> > v4: Add enum alpm_mode to hold the aux-wake/less capability.
> >
> > Signed-off-by: Animesh Manna <animesh.manna@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_alpm.c     | 58
> > +++++++++++++++++++
> >  drivers/gpu/drm/i915/display/intel_alpm.h     |  5 ++
> >  .../drm/i915/display/intel_display_types.h    | 11 ++++
> >  drivers/gpu/drm/i915/display/intel_dp.c       |  4 ++
> >  4 files changed, 78 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c
> > b/drivers/gpu/drm/i915/display/intel_alpm.c
> > index ee6c2a959f09..5979eab1f2e0 100644
> > --- a/drivers/gpu/drm/i915/display/intel_alpm.c
> > +++ b/drivers/gpu/drm/i915/display/intel_alpm.c
> > @@ -11,6 +11,23 @@
> >  #include "intel_dp_aux.h"
> >  #include "intel_psr_regs.h"
> >
> > +enum alpm_mode intel_alpm_get_capability(struct intel_dp *intel_dp) {
> > +       u8 alpm_caps = 0;
> > +
> > +       if (drm_dp_dpcd_readb(&intel_dp->aux, DP_RECEIVER_ALPM_CAP,
> > +                             &alpm_caps) != 1)
> > +               return ALPM_INVALID;
> > +
> > +       if (alpm_caps & DP_ALPM_CAP)
> > +               return ALPM_AUX_WAKE;
> > +
> > +       if (alpm_caps & DP_ALPM_AUX_LESS_CAP)
> > +               return ALPM_AUX_LESS;
> > +
> > +       return ALPM_NOT_SUPPORTED;
> > +}
> 
> This will always return ALPM_AUX_WAKE if both are supported. I don't think
> this is what you want?
> 
> You could add alpm_dpcd into intel_dp. Then for this purpose add
> aux_wake_supported() and aux_less_wake_supported()?

Ok, will add in next version.

Regards,
Animesh

> 
> BR,
> 
> Jouni Högander
> 
> > +
> >  /*
> >   * See Bspec: 71632 for the table
> >   *
> > @@ -242,6 +259,47 @@ bool intel_alpm_compute_params(struct intel_dp
> > *intel_dp,
> >         return true;
> >  }
> >
> > +void intel_alpm_compute_lobf_config(struct intel_dp *intel_dp,
> > +                                   struct intel_crtc_state
> > *crtc_state,
> > +                                   struct drm_connector_state
> > *conn_state)
> > +{
> > +       struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> > +       struct drm_display_mode *adjusted_mode = &crtc_state-
> > >hw.adjusted_mode;
> > +       int waketime_in_lines, first_sdp_position;
> > +       int context_latency, guardband;
> > +
> > +       if (!intel_dp_is_edp(intel_dp))
> > +               return;
> > +
> > +       if (DISPLAY_VER(i915) < 20)
> > +               return;
> > +
> > +       if (!intel_dp_as_sdp_supported(intel_dp))
> > +               return;
> > +
> > +       if (crtc_state->has_psr)
> > +               return;
> > +
> > +       if (intel_dp->alpm_parameters.mode == ALPM_INVALID ||
> > +           intel_dp->alpm_parameters.mode == ALPM_NOT_SUPPORTED)
> > +               return;
> > +
> > +       if (!intel_alpm_compute_params(intel_dp, crtc_state))
> > +               return;
> > +
> > +       context_latency = adjusted_mode->crtc_vblank_start -
> > adjusted_mode->crtc_vdisplay;
> > +       guardband = adjusted_mode->crtc_vtotal -
> > +                   adjusted_mode->crtc_vdisplay - context_latency;
> > +       first_sdp_position = adjusted_mode->crtc_vtotal -
> > adjusted_mode->crtc_vsync_start;
> > +       if (intel_dp->alpm_parameters.mode == ALPM_AUX_LESS)
> > +               waketime_in_lines = intel_dp-
> > >alpm_parameters.io_wake_lines;
> > +       else
> > +               waketime_in_lines = intel_dp-
> > >alpm_parameters.fast_wake_lines;
> > +
> > +       crtc_state->has_lobf = (context_latency + guardband) >
> > +               (first_sdp_position + waketime_in_lines); }
> > +
> >  static void lnl_alpm_configure(struct intel_dp *intel_dp)
> >  {
> >         struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); diff
> > --git a/drivers/gpu/drm/i915/display/intel_alpm.h
> > b/drivers/gpu/drm/i915/display/intel_alpm.h
> > index c45d078e5a6b..80c8a66b34af 100644
> > --- a/drivers/gpu/drm/i915/display/intel_alpm.h
> > +++ b/drivers/gpu/drm/i915/display/intel_alpm.h
> > @@ -10,9 +10,14 @@
> >
> >  struct intel_dp;
> >  struct intel_crtc_state;
> > +struct drm_connector_state;
> >
> > +enum alpm_mode intel_alpm_get_capability(struct intel_dp *intel_dp);
> >  bool intel_alpm_compute_params(struct intel_dp *intel_dp,
> >                                struct intel_crtc_state *crtc_state);
> > +void intel_alpm_compute_lobf_config(struct intel_dp *intel_dp,
> > +                                   struct intel_crtc_state
> > *crtc_state,
> > +                                   struct drm_connector_state
> > *conn_state);
> >  void intel_alpm_configure(struct intel_dp *intel_dp);
> >
> >  #endif
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index e81fd71ce57b..79e9e543020b 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -1405,6 +1405,9 @@ struct intel_crtc_state {
> >
> >         /* for loading single buffered registers during vblank */
> >         struct drm_vblank_work vblank_work;
> > +
> > +       /* LOBF flag */
> > +       bool has_lobf;
> >  };
> >
> >  enum intel_pipe_crc_source {
> > @@ -1715,6 +1718,13 @@ struct intel_psr {
> >         u8 entry_setup_frames;
> >  };
> >
> > +enum alpm_mode {
> > +       ALPM_INVALID,
> > +       ALPM_AUX_WAKE,
> > +       ALPM_AUX_LESS,
> > +       ALPM_NOT_SUPPORTED
> > +};
> > +
> >  struct intel_dp {
> >         i915_reg_t output_reg;
> >         u32 DP;
> > @@ -1835,6 +1845,7 @@ struct intel_dp {
> >                 u8 fast_wake_lines;
> >
> >                 /* LNL and beyond */
> > +               enum alpm_mode mode;
> >                 u8 check_entry_lines;
> >                 u8 silence_period_sym_clocks;
> >                 u8 lfps_half_cycle_num_of_syms; diff --git
> > a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 486361eb0070..df423a33f6fc 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -48,6 +48,7 @@
> >  #include "i915_drv.h"
> >  #include "i915_irq.h"
> >  #include "i915_reg.h"
> > +#include "intel_alpm.h"
> >  #include "intel_atomic.h"
> >  #include "intel_audio.h"
> >  #include "intel_backlight.h"
> > @@ -3000,6 +3001,7 @@ intel_dp_compute_config(struct intel_encoder
> > *encoder,
> >         intel_vrr_compute_config(pipe_config, conn_state);
> >         intel_dp_compute_as_sdp(intel_dp, pipe_config);
> >         intel_psr_compute_config(intel_dp, pipe_config, conn_state);
> > +       intel_alpm_compute_lobf_config(intel_dp, pipe_config,
> > conn_state);
> >         intel_dp_drrs_compute_config(connector, pipe_config,
> > link_bpp_x16);
> >         intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state);
> >         intel_dp_compute_hdr_metadata_infoframe_sdp(intel_dp,
> > pipe_config, conn_state);
> > @@ -6615,6 +6617,8 @@ static bool intel_edp_init_connector(struct
> > intel_dp *intel_dp,
> >
> >         intel_pps_init_late(intel_dp);
> >
> > +       intel_dp->alpm_parameters.mode =
> > intel_alpm_get_capability(intel_dp);
> > +
> >         return true;
> >
> >  out_vdd_off:


  reply	other threads:[~2024-05-13 11:22 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-09  5:31 [PATCH v4 0/6] Link off between frames for edp Animesh Manna
2024-05-09  5:31 ` [PATCH v4 1/6] drm/i915/alpm: Move alpm parameters from intel_psr Animesh Manna
2024-05-09  5:31 ` [PATCH v4 2/6] drm/i915/alpm: Move alpm related code to a new file Animesh Manna
2024-05-09  5:31 ` [PATCH v4 3/6] drm/display: Add missing aux less alpm wake related bits Animesh Manna
2024-05-09  5:31 ` [PATCH v4 4/6] drm/i915/alpm: Add compute config for lobf Animesh Manna
2024-05-13  7:31   ` Hogander, Jouni
2024-05-13 11:22     ` Manna, Animesh [this message]
2024-05-09  5:31 ` [PATCH v4 5/6] drm/i915/alpm: Enable lobf from source in ALPM_CTL Animesh Manna
2024-05-09  5:31 ` [PATCH v4 6/6] drm/i915/alpm: Add debugfs for LOBF Animesh Manna
2024-05-09  6:37 ` ✗ Fi.CI.CHECKPATCH: warning for Link off between frames for edp (rev4) Patchwork
2024-05-09  6:37 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-05-09  6:44 ` ✓ Fi.CI.BAT: success " Patchwork
2024-05-09 18:06 ` ✗ Fi.CI.IGT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=PH7PR11MB59815A85BEFD5FDC22798B68F9E22@PH7PR11MB5981.namprd11.prod.outlook.com \
    --to=animesh.manna@intel.com \
    --cc=arun.r.murthy@intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=jouni.hogander@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).