From: Shawn Guo <shawnguo2@yeah.net>
To: Frank Li <Frank.Li@nxp.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 10/10] arm64: dts: imx8qm-mek: add fec2 support
Date: Thu, 25 Apr 2024 16:09:18 +0800 [thread overview]
Message-ID: <ZioPrhKPWBrTdLUS@dragon> (raw)
In-Reply-To: <20240422-dts_8qm_audio-v3-10-680cee731ced@nxp.com>
On Mon, Apr 22, 2024 at 03:50:12PM -0400, Frank Li wrote:
> Add fec2 support.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 40 ++++++++++++++++++++++++++++
> 1 file changed, 40 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> index cef395e919395..570a9bf583132 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> @@ -40,6 +40,15 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
> enable-active-high;
> };
>
> + reg_fec2_supply: fec2_nvcc {
regulator-fec2-nvcc for node name?
Shawn
> + compatible = "regulator-fixed";
> + regulator-name = "fec2_nvcc";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> reg_can01_en: regulator-can01-gen {
> compatible = "regulator-fixed";
> regulator-name = "can01-en";
> @@ -381,6 +390,19 @@ ethphy1: ethernet-phy@1 {
> };
> };
>
> +&fec2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec2>;
> + phy-mode = "rgmii-txid";
> + phy-handle = <ðphy1>;
> + phy-supply = <®_fec2_supply>;
> + nvmem-cells = <&fec_mac1>;
> + nvmem-cell-names = "mac-address";
> + rx-internal-delay-ps = <2000>;
> + fsl,magic-packet;
> + status = "okay";
> +};
> +
> &usdhc1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_usdhc1>;
> @@ -500,6 +522,24 @@ IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021
> >;
> };
>
> + pinctrl_fec2: fec2grp {
> + fsl,pins = <
> + IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0
> + IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060
> + IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060
> + IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060
> + IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060
> + IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060
> + IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060
> + IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060
> + IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060
> + IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060
> + IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060
> + IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060
> + IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060
> + >;
> + };
> +
> pinctrl_flexcan1: flexcan0grp {
> fsl,pins = <
> IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21
>
> --
> 2.34.1
>
prev parent reply other threads:[~2024-04-25 8:09 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-22 19:50 [PATCH v3 00/10] arm64: dts: imx8qm Add audio\flexcan\i2c\fec1 nodes for imx8qm-mek board Frank Li
2024-04-22 19:50 ` [PATCH v3 01/10] arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>; Frank Li
2024-04-22 19:50 ` [PATCH v3 02/10] arm64: dts: imx8qm-ss-audio: add audio nodes Frank Li
2024-04-22 19:50 ` [PATCH v3 03/10] arm64: dts: imx8qm-mek: add sai and wm8960 support Frank Li
2024-04-22 19:50 ` [PATCH v3 04/10] arm64: dts: imx8x: add cm41 subsystem dtsi Frank Li
2024-04-22 19:50 ` [PATCH v3 05/10] arm64: dts: imx8qm-mek: add i2c0 and children devices Frank Li
2024-04-22 19:50 ` [PATCH v3 06/10] arm64: dts: imx8qm-mek: add cm41_i2c " Frank Li
2024-04-22 19:50 ` [PATCH v3 07/10] arm64: dts: imx8qm-mek: add flexcan support Frank Li
2024-04-23 7:53 ` Marc Kleine-Budde
2024-04-22 19:50 ` [PATCH v3 08/10] arm64: dts: imx8qm-mek: add lsio mu5 and mu6 Frank Li
2024-04-25 8:07 ` Shawn Guo
2024-04-22 19:50 ` [PATCH v3 09/10] arm64: dts: imx8qm: add ocopt and fec_mac[0,1] Frank Li
2024-04-22 19:50 ` [PATCH v3 10/10] arm64: dts: imx8qm-mek: add fec2 support Frank Li
2024-04-25 8:09 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZioPrhKPWBrTdLUS@dragon \
--to=shawnguo2@yeah.net \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).