From: Frank Li <Frank.Li@nxp.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>
Cc: devicetree@vger.kernel.org, imx@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Frank Li <Frank.Li@nxp.com>
Subject: [PATCH v4 10/10] arm64: dts: imx8qm-mek: add fec2 support
Date: Thu, 25 Apr 2024 16:24:46 -0400 [thread overview]
Message-ID: <20240425-dts_8qm_audio-v4-10-7fa6ab2fd64e@nxp.com> (raw)
In-Reply-To: <20240425-dts_8qm_audio-v4-0-7fa6ab2fd64e@nxp.com>
Add fec2 support.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 40 ++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 3e57c760e40a5..c024be33fbcce 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -40,6 +40,15 @@ reg_usdhc2_vmmc: usdhc2-vmmc {
enable-active-high;
};
+ reg_fec2_supply: regulator-fec2-nvcc {
+ compatible = "regulator-fixed";
+ regulator-name = "fec2_nvcc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
reg_can01_en: regulator-can01-gen {
compatible = "regulator-fixed";
regulator-name = "can01-en";
@@ -334,6 +343,19 @@ ethphy1: ethernet-phy@1 {
};
};
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec2>;
+ phy-mode = "rgmii-txid";
+ phy-handle = <ðphy1>;
+ phy-supply = <®_fec2_supply>;
+ nvmem-cells = <&fec_mac1>;
+ nvmem-cell-names = "mac-address";
+ rx-internal-delay-ps = <2000>;
+ fsl,magic-packet;
+ status = "okay";
+};
+
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
@@ -500,6 +522,24 @@ IMX8QM_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B 0x06000021
>;
};
+ pinctrl_fec2: fec2grp {
+ fsl,pins = <
+ IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0
+ IMX8QM_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL 0x00000060
+ IMX8QM_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC 0x00000060
+ IMX8QM_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0 0x00000060
+ IMX8QM_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1 0x00000060
+ IMX8QM_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2 0x00000060
+ IMX8QM_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3 0x00000060
+ IMX8QM_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC 0x00000060
+ IMX8QM_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL 0x00000060
+ IMX8QM_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0 0x00000060
+ IMX8QM_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1 0x00000060
+ IMX8QM_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2 0x00000060
+ IMX8QM_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3 0x00000060
+ >;
+ };
+
pinctrl_flexcan1: flexcan0grp {
fsl,pins = <
IMX8QM_FLEXCAN0_TX_DMA_FLEXCAN0_TX 0x21
--
2.34.1
prev parent reply other threads:[~2024-04-25 20:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-25 20:24 [PATCH v4 00/10] arm64: dts: imx8qm Add audio\flexcan\i2c\fec1 nodes for imx8qm-mek board Frank Li
2024-04-25 20:24 ` [PATCH v4 01/10] arm64: dts: imx8-ss-audio: remove memory-region = <&dsp_reserved>; Frank Li
2024-04-25 20:24 ` [PATCH v4 02/10] arm64: dts: imx8qm-ss-audio: add audio nodes Frank Li
2024-04-25 20:24 ` [PATCH v4 03/10] arm64: dts: imx8qm-mek: add sai and wm8960 support Frank Li
2024-04-25 20:24 ` [PATCH v4 04/10] arm64: dts: imx8x: add cm41 subsystem dtsi Frank Li
2024-04-25 20:24 ` [PATCH v4 05/10] arm64: dts: imx8qm-mek: add i2c0 and children devices Frank Li
2024-04-25 20:24 ` [PATCH v4 06/10] arm64: dts: imx8qm-mek: add cm41_i2c " Frank Li
2024-04-25 20:24 ` [PATCH v4 07/10] arm64: dts: imx8qm-mek: add flexcan support Frank Li
2024-04-25 20:24 ` [PATCH v4 08/10] arm64: dts: imx8qm-mek: add lsio mu5 and mu6 Frank Li
2024-04-25 20:24 ` [PATCH v4 09/10] arm64: dts: imx8qm: add ocopt and fec_mac[0,1] Frank Li
2024-04-25 20:24 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240425-dts_8qm_audio-v4-10-7fa6ab2fd64e@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).