From: "Rob Herring (Arm)" <robh@kernel.org>
To: Andreas Kemnade <andreas@kemnade.info>
Cc: kernel@pengutronix.de, s.hauer@pengutronix.de,
shawnguo@kernel.org, leoyang.li@nxp.com, krzk+dt@kernel.org,
conor+dt@kernel.org, linux-kernel@vger.kernel.org,
festevam@gmail.com, linux-arm-kernel@lists.infradead.org,
marex@denx.de, imx@lists.linux.dev, devicetree@vger.kernel.org
Subject: Re: [PATCH 0/2] ARM: dts: mix: Add Kobo Clara HD rev B
Date: Mon, 06 May 2024 15:40:23 -0500 [thread overview]
Message-ID: <171502764288.89501.11764429607857982890.robh@kernel.org> (raw)
In-Reply-To: <20240504215344.861327-1-andreas@kemnade.info>
On Sat, 04 May 2024 23:53:42 +0200, Andreas Kemnade wrote:
> Apparently there exists another revision of the Kobo Clara HD
> which has just different regulator setup. So add support for it.
>
> For details: https://gitlab.com/postmarketOS/pmaports/-/issues/2356
>
> Andreas Kemnade (2):
> dt-bindings: arm: fsl: Add Kobo Clara HD rev B
> ARM: dts: imx: Add Kobo Clara HD rev b
>
> .../devicetree/bindings/arm/fsl.yaml | 6 ++
> arch/arm/boot/dts/nxp/imx/Makefile | 1 +
> .../dts/nxp/imx/imx6sll-kobo-clarahd-b.dts | 79 +++++++++++++++++++
> 3 files changed, 86 insertions(+)
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dts
>
> --
> 2.39.2
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y nxp/imx/imx6sll-kobo-clarahd-b.dtb' for 20240504215344.861327-1-andreas@kemnade.info:
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: /soc/bus@2000000/spba-bus@2000000/spdif@2004000: failed to match any schema with compatible: ['fsl,imx6sl-spdif', 'fsl,imx35-spdif']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: serial@2034000: dma-name: b'rx\x00tx\x00' is not of type 'object', 'array', 'boolean', 'null'
from schema $id: http://devicetree.org/schemas/dt-core.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: timer@2098000: compatible:
'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-gpt'] is too short
'fsl,imx1-gpt' was expected
'fsl,imx21-gpt' was expected
'fsl,imx27-gpt' was expected
'fsl,imx31-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx25-gpt', 'fsl,imx50-gpt', 'fsl,imx51-gpt', 'fsl,imx53-gpt', 'fsl,imx6q-gpt']
'fsl,imx6dl-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx6ul-gpt', 'fsl,imx7d-gpt']
from schema $id: http://devicetree.org/schemas/timer/fsl,imxgpt.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: anatop@20c8000: '#address-cells', '#size-cells', 'regulator-3p0@20c8120', 'temperature-sensor' do not match any of the regexes: 'pinctrl-[0-9]+', 'regulator-((1p1)|(2p5)|(3p0)|(vddcore)|(vddpu)|(vddsoc))$'
from schema $id: http://devicetree.org/schemas/soc/imx/fsl,imx-anatop.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: regulator-3p0@20c8120: Unevaluated properties are not allowed ('reg' was unexpected)
from schema $id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: temperature-sensor: '#thermal-sensor-cells' is a required property
from schema $id: http://devicetree.org/schemas/thermal/imx-thermal.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: /soc/bus@2000000/interrupt-controller@20dc000: failed to match any schema with compatible: ['fsl,imx6sll-gpc', 'fsl,imx6q-gpc']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6sll-iomuxc']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: /soc/bus@2000000/csi@20e8000: failed to match any schema with compatible: ['fsl,imx6sll-csi', 'fsl,imx6s-csi']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: /soc/bus@2000000/csi@20e8000: failed to match any schema with compatible: ['fsl,imx6sll-csi', 'fsl,imx6s-csi']
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: lcd-controller@20f8000: compatible:
'oneOf' conditional failed, one must be fixed:
['fsl,imx6sll-lcdif', 'fsl,imx28-lcdif'] is too long
'fsl,imx6sll-lcdif' is not one of ['fsl,imx23-lcdif', 'fsl,imx28-lcdif', 'fsl,imx6sx-lcdif', 'fsl,imx8mp-lcdif', 'fsl,imx93-lcdif']
'fsl,imx6sx-lcdif' was expected
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: lcd-controller@20f8000: clocks: [[2, 129], [2, 123], [2, 0]] is too long
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
arch/arm/boot/dts/nxp/imx/imx6sll-kobo-clarahd-b.dtb: lcd-controller@20f8000: clock-names: ['pix', 'axi', 'disp_axi'] is too long
from schema $id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
prev parent reply other threads:[~2024-05-06 20:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-04 21:53 [PATCH 0/2] ARM: dts: mix: Add Kobo Clara HD rev B Andreas Kemnade
2024-05-04 21:53 ` [PATCH 1/2] dt-bindings: arm: fsl: " Andreas Kemnade
2024-05-05 8:28 ` Krzysztof Kozlowski
2024-05-04 21:53 ` [PATCH 2/2] ARM: dts: imx: Add Kobo Clara HD rev b Andreas Kemnade
2024-05-18 9:41 ` Andreas Kemnade
2024-05-06 20:40 ` Rob Herring (Arm) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=171502764288.89501.11764429607857982890.robh@kernel.org \
--to=robh@kernel.org \
--cc=andreas@kemnade.info \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).