From: Jacob Abel <jacobabel@nullpo.dev>
To: Junio C Hamano <gitster@pobox.com>
Cc: git@vger.kernel.org, "Ævar Arnfjörð Bjarmason" <avarab@gmail.com>,
"Eric Sunshine" <sunshine@sunshineco.com>,
"Phillip Wood" <phillip.wood123@gmail.com>,
"Rubén Justo" <rjusto@gmail.com>, "Taylor Blau" <me@ttaylorr.com>,
rsbecker@nexbridge.com
Subject: Re: [PATCH v5 2/4] worktree add: refactor opt exclusion tests
Date: Tue, 20 Dec 2022 23:29:27 +0000 [thread overview]
Message-ID: <20221220232920.wppkxkvuxkcoih4x@phi> (raw)
In-Reply-To: <xmqqsfhawwqf.fsf@gitster.g>
On 22/12/20 01:00PM, Junio C Hamano wrote:
> Jacob Abel <jacobabel@nullpo.dev> writes:
>
> > Pull duplicate test code into a function so that additional opt
> > combinations can be tested succinctly.
> >
> > Signed-off-by: Jacob Abel <jacobabel@nullpo.dev>
> > ---
> > t/t2400-worktree-add.sh | 20 ++++++++++----------
> > 1 file changed, 10 insertions(+), 10 deletions(-)
>
> OK.
>
> > +# Helper function to test mutually exclusive options.
> > +test_wt_add_excl() {
>
> Have SP on both sides of (), i.e.
>
> test_wt_add_excl () {
Done.
>
> > + local opts="$@" &&
> > + test_expect_success "'worktree add' with '$opts' has mutually exclusive options" '
> > + test_must_fail git worktree add $opts
> > + '
> > +}
>
> In this particular case with the given arguments, it does not make a
> difference, but make it a habit to think twice if "$*" is what you
> want when you write "$@". "$@" does a lot more than just concatenate
> $1, $2, ... with SP in between, and the use of $opts in the message
> merely wants the "concatenate with SP" behaviour, which is what "$*"
> is for.
Understood.
>
> I actually would write the above if I were doing this patch:
>
> test_wt_add_excl () {
> test_expect_success "'worktree add' with $* has mutually exclusive options" '
> test_must_fail git worktree add "$@"
> '
> }
>
Changed.
> Notice the use of "$@" on the "git worktree add" invocation? This
> allows callers of test_wt_add_excl pass parameters with SP in it,
> thanks to the magic "$@". Again, as I said earlier, for these
> callers ...
>
> > +test_wt_add_excl -b poodle -B poodle bamboo main
> > +test_wt_add_excl -b poodle --detach bamboo main
> > +test_wt_add_excl -B poodle --detach bamboo main
>
> ... the distinction does not matter, but
>
> helper --lock --reason "my reason with multiple words" bamboo main
>
> must be written with "$@", like so:
>
> helper () {
> git worktree add "$@"
> }
>
> not
>
> helper () { # BAD
> local opt="$@"
> git worktree add $opt
> }
>
> $opt in this case is a SP-concatenated string
>
> opt="--lock --reason my reason with multiple words bamboo main"
>
> and passing it without quotes around it to "git worktree add"
> will give only "my" as the parameter to the option "--reason",
> with three extra words on the comand line.
This makes sense. I'm not the best with shell scripting so I appreciate
the explanation.
next prev parent reply other threads:[~2022-12-20 23:29 UTC|newest]
Thread overview: 129+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-04 1:02 [PATCH 0/4] worktree: Support `--orphan` when creating new worktrees Jacob Abel
2022-11-04 1:03 ` [PATCH 1/4] worktree add: Include -B in usage docs Jacob Abel
2022-11-04 3:05 ` Eric Sunshine
2022-11-04 4:24 ` Jacob Abel
2022-11-04 1:03 ` [PATCH 2/4] builtin/worktree.c: Update checkout_worktree() to use git-worktree Jacob Abel
2022-11-04 1:32 ` Ævar Arnfjörð Bjarmason
2022-11-04 3:58 ` Jacob Abel
2022-11-04 20:45 ` Taylor Blau
2022-11-04 1:03 ` [PATCH 3/4] worktree add: add --orphan flag Jacob Abel
2022-11-04 1:33 ` Ævar Arnfjörð Bjarmason
2022-11-04 4:11 ` Jacob Abel
2022-11-04 5:03 ` Eric Sunshine
2022-11-04 16:41 ` Jacob Abel
2022-11-10 4:13 ` Eric Sunshine
2022-11-10 21:21 ` Jacob Abel
2022-11-04 1:03 ` [PATCH 4/4] worktree add: Add unit tests for --orphan Jacob Abel
2022-11-04 1:37 ` Ævar Arnfjörð Bjarmason
2022-11-04 4:17 ` Jacob Abel
2022-11-04 4:33 ` [PATCH 0/4] worktree: Support `--orphan` when creating new worktrees Eric Sunshine
2022-11-04 4:47 ` Jacob Abel
2022-11-04 4:50 ` Jacob Abel
2022-11-04 21:34 ` [PATCH v2 0/2] " Jacob Abel
2022-11-04 21:34 ` [PATCH v2 1/2] worktree add: Include -B in usage docs Jacob Abel
2022-11-04 21:34 ` [PATCH v2 2/2] worktree add: add --orphan flag Jacob Abel
2022-11-10 23:32 ` [PATCH v3 0/2] worktree: Support `--orphan` when creating new worktrees Jacob Abel
2022-11-10 23:32 ` [PATCH v3 1/2] worktree add: Include -B in usage docs Jacob Abel
2022-11-10 23:32 ` [PATCH v3 2/2] worktree add: add --orphan flag Jacob Abel
2022-11-15 21:08 ` Ævar Arnfjörð Bjarmason
2022-11-15 21:29 ` Eric Sunshine
2022-11-15 22:35 ` Ævar Arnfjörð Bjarmason
2022-11-16 0:19 ` Eric Sunshine
2022-11-19 3:13 ` Jacob Abel
2022-11-19 3:09 ` Jacob Abel
2022-11-19 11:50 ` Ævar Arnfjörð Bjarmason
2022-11-19 1:44 ` Jacob Abel
2022-11-22 6:00 ` Eric Sunshine
2022-11-22 23:09 ` Jacob Abel
2022-11-15 22:09 ` Ævar Arnfjörð Bjarmason
2022-11-19 2:57 ` Jacob Abel
2022-11-19 11:50 ` Ævar Arnfjörð Bjarmason
2022-11-16 0:39 ` [PATCH v3 0/2] worktree: Support `--orphan` when creating new worktrees Eric Sunshine
2022-11-17 10:00 ` Ævar Arnfjörð Bjarmason
2022-11-19 3:47 ` Jacob Abel
2022-11-19 11:48 ` Ævar Arnfjörð Bjarmason
2022-11-22 5:16 ` Eric Sunshine
2022-11-22 23:26 ` Jacob Abel
2022-11-22 23:55 ` Ævar Arnfjörð Bjarmason
2022-11-23 2:47 ` Jacob Abel
2022-11-23 2:43 ` Rubén Justo
2022-11-23 5:37 ` Jacob Abel
2022-11-23 7:35 ` Rubén Justo
2022-11-22 14:45 ` Phillip Wood
2022-11-23 4:21 ` Jacob Abel
2022-12-12 1:42 ` [PATCH v4 0/3] " Jacob Abel
2022-12-12 1:42 ` [PATCH v4 1/3] worktree add: Include -B in usage docs Jacob Abel
2022-12-12 1:42 ` [PATCH v4 2/3] worktree add: add --orphan flag Jacob Abel
2022-12-12 8:11 ` Ævar Arnfjörð Bjarmason
2022-12-12 14:55 ` Jacob Abel
2022-12-12 18:14 ` Ævar Arnfjörð Bjarmason
2022-12-12 22:39 ` Jacob Abel
2022-12-12 1:43 ` [PATCH v4 3/3] worktree add: Add hint to use --orphan when bad ref Jacob Abel
2022-12-12 8:35 ` Ævar Arnfjörð Bjarmason
2022-12-12 14:59 ` Jacob Abel
2022-12-12 18:16 ` Ævar Arnfjörð Bjarmason
2022-12-12 18:35 ` Eric Sunshine
2022-12-12 22:36 ` Jacob Abel
2022-12-12 22:38 ` Jacob Abel
2022-12-20 2:37 ` [PATCH v5 0/4] worktree: Support `--orphan` when creating new worktrees Jacob Abel
2022-12-20 2:37 ` [PATCH v5 1/4] worktree add: Include -B in usage docs Jacob Abel
2022-12-20 3:42 ` Junio C Hamano
2022-12-20 23:24 ` Jacob Abel
2022-12-20 2:37 ` [PATCH v5 2/4] worktree add: refactor opt exclusion tests Jacob Abel
2022-12-20 4:00 ` Junio C Hamano
2022-12-20 23:29 ` Jacob Abel [this message]
2022-12-20 2:38 ` [PATCH v5 3/4] worktree add: add --orphan flag Jacob Abel
2022-12-20 4:19 ` Junio C Hamano
2022-12-21 0:17 ` Jacob Abel
2022-12-20 2:38 ` [PATCH v5 4/4] worktree add: Add hint to use --orphan when bad ref Jacob Abel
2022-12-20 6:18 ` Junio C Hamano
2022-12-21 0:42 ` Jacob Abel
2022-12-28 6:16 ` [PATCH v6 0/4] worktree: Support `--orphan` when creating new worktrees Jacob Abel
2022-12-28 6:16 ` [PATCH v6 1/4] worktree add: include -B in usage docs Jacob Abel
2022-12-28 6:16 ` [PATCH v6 2/4] worktree add: refactor opt exclusion tests Jacob Abel
2022-12-28 12:54 ` Junio C Hamano
2022-12-29 6:51 ` Jacob Abel
2022-12-29 10:07 ` Junio C Hamano
2022-12-29 20:48 ` Jacob Abel
2023-01-06 6:31 ` Jacob Abel
2023-01-06 12:34 ` Junio C Hamano
2023-01-07 4:45 ` Jacob Abel
2022-12-28 6:17 ` [PATCH v6 3/4] worktree add: add --orphan flag Jacob Abel
2022-12-28 6:17 ` [PATCH v6 4/4] worktree add: add hint to direct users towards --orphan Jacob Abel
2023-01-06 14:19 ` Phillip Wood
2022-12-28 8:01 ` [PATCH v6 0/4] worktree: Support `--orphan` when creating new worktrees Ævar Arnfjörð Bjarmason
2022-12-29 6:38 ` Jacob Abel
2022-12-29 10:42 ` Ævar Arnfjörð Bjarmason
2022-12-29 21:22 ` Jacob Abel
2023-01-07 4:58 ` [PATCH v7 " Jacob Abel
2023-01-07 4:59 ` [PATCH v7 1/4] worktree add: include -B in usage docs Jacob Abel
2023-01-07 4:59 ` [PATCH v7 2/4] worktree add: refactor opt exclusion tests Jacob Abel
2023-01-08 7:13 ` Junio C Hamano
2023-01-08 15:08 ` Jacob Abel
2023-01-07 4:59 ` [PATCH v7 3/4] worktree add: add --orphan flag Jacob Abel
2023-01-07 4:59 ` [PATCH v7 4/4] worktree add: add hint to direct users towards --orphan Jacob Abel
2023-01-09 12:26 ` [PATCH v7 0/4] worktree: Support `--orphan` when creating new worktrees Ævar Arnfjörð Bjarmason
2023-01-09 17:11 ` Jacob Abel
2023-01-09 17:21 ` Ævar Arnfjörð Bjarmason
2023-01-09 17:26 ` Jacob Abel
2023-01-09 17:32 ` [PATCH v8 " Jacob Abel
2023-01-09 17:32 ` [PATCH v8 1/4] worktree add: include -B in usage docs Jacob Abel
2023-01-09 17:33 ` [PATCH v8 2/4] worktree add: refactor opt exclusion tests Jacob Abel
2023-01-09 17:33 ` [PATCH v8 3/4] worktree add: add --orphan flag Jacob Abel
2023-01-13 10:20 ` Phillip Wood
2023-01-13 17:32 ` Junio C Hamano
2023-01-14 22:47 ` Jacob Abel
2023-01-15 3:09 ` Junio C Hamano
2023-01-15 3:41 ` rsbecker
2023-01-15 3:49 ` Junio C Hamano
2023-01-18 22:46 ` 'Jacob Abel'
2023-01-18 22:18 ` Jacob Abel
2023-01-19 15:32 ` Ævar Arnfjörð Bjarmason
2023-01-19 16:32 ` Junio C Hamano
2023-01-16 10:47 ` Phillip Wood
2023-01-18 22:40 ` Jacob Abel
2023-01-19 16:18 ` Phillip Wood
2023-01-19 22:20 ` Jacob Abel
2023-01-09 17:33 ` [PATCH v8 4/4] worktree add: add hint to direct users towards --orphan Jacob Abel
2023-01-09 19:20 ` [PATCH v8 0/4] worktree: Support `--orphan` when creating new worktrees Ævar Arnfjörð Bjarmason
2023-01-13 17:34 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221220232920.wppkxkvuxkcoih4x@phi \
--to=jacobabel@nullpo.dev \
--cc=avarab@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=me@ttaylorr.com \
--cc=phillip.wood123@gmail.com \
--cc=rjusto@gmail.com \
--cc=rsbecker@nexbridge.com \
--cc=sunshine@sunshineco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).