From: Jacob Abel <jacobabel@nullpo.dev>
To: git@vger.kernel.org
Cc: "Jacob Abel" <jacobabel@nullpo.dev>,
"Ævar Arnfjörð Bjarmason" <avarab@gmail.com>,
"Eric Sunshine" <sunshine@sunshineco.com>,
"Phillip Wood" <phillip.wood123@gmail.com>,
"Rubén Justo" <rjusto@gmail.com>, "Taylor Blau" <me@ttaylorr.com>,
rsbecker@nexbridge.com
Subject: [PATCH v4 0/3] worktree: Support `--orphan` when creating new worktrees
Date: Mon, 12 Dec 2022 01:42:05 +0000 [thread overview]
Message-ID: <20221212014003.20290-1-jacobabel@nullpo.dev> (raw)
In-Reply-To: <20221110233137.10414-1-jacobabel@nullpo.dev>
While working with the worktree based git workflow, I realised that setting
up a new git repository required switching between the traditional and
worktree based workflows. Searching online I found a SO answer [1] which
seemed to support this and which indicated that adding support for this should
not be technically difficult.
This patchset has three parts:
* adding `-B` to the usage docs (noticed during dev and it seemed too small
to justify a separate submission)
* adding orphan branch functionality (as is present in `git-switch`)
to `git-worktree-add`
* adding an advise for using --orphan when `git worktree add` fails due to
a bad ref.
Changes from v3:
* Fix mistake in SYNOPSIS and `--help`. Patch for this change can be found
in [2], by courtesy of Ævar Arnfjörð Bjarmason.
* Collapsed sequential if statements into if-else chain & simplified
conditions as requested in [2].
* Simplified tests for mutually exclusive options and removed duplicate
`-B/--detach` test case. Patch for this change can be found in [3],
by courtesy of Ævar Arnfjörð Bjarmason.
* Remove references to `git-switch`. Behavior is now explained fully in docs
instead. Changes to the docs suggested in [4], by courtesy of Eric Sunshine.
* Updated test case to use `test_path_is_missing` instead of `! test -d` [5].
* Updated signature for `make_worktree_orphan()` and changed
`const char *orphan_branch` in `struct add_opts` to `int orphan` (boolean)
to simplify the patch and maintain consistency with other flags [6].
* Added hint to common cases where `--orphan` is desired [7] to address
concerns brought up in [8][9]. Slight change from `HEAD` to `branch`.
* Added the new advice to the docs, advice.c/h, and using
`advise_if_enabled()` as requested in [10].
* Added tests to verify `--lock` and `--reason` work properly with
the newly added `--orphan` flag.
* Added tests to verify that the orphan advise [7] is emitted only at the
proper times.
* Added tests to verify the changes [7] do not interfere with existing
behavior. ex: creating a worktree from a remote branch when HEAD is
an orphan.
1. https://stackoverflow.com/a/68717229/15064705/
2. https://lore.kernel.org/git/221115.86edu3kfqz.gmgdl@evledraar.gmail.com/
3. https://lore.kernel.org/git/221116.86a64rkdcj.gmgdl@evledraar.gmail.com/
4. https://lore.kernel.org/git/CAPig+cQiyd9yGE_XpPZmzLQnNDMypnrEgkV7nqRZZn3j6E0APQ@mail.gmail.com/
5. https://lore.kernel.org/git/221115.86iljfkjjo.gmgdl@evledraar.gmail.com/
6. https://lore.kernel.org/git/20221119025701.syuscuoqjuqhqsoz@phi/
7. https://lore.kernel.org/git/20221119034728.m4kxh4tdpof7us7j@phi/
8. https://lore.kernel.org/git/CAPig+cTTn764ObHJuw8epOtBdTUwocVRV=tLieCa4zf-PGCegw@mail.gmail.com/
9. https://lore.kernel.org/git/221117.86sfihj3mw.gmgdl@evledraar.gmail.com/
10. https://lore.kernel.org/git/221123.86a64ia6bx.gmgdl@evledraar.gmail.com/
Jacob Abel (3):
worktree add: Include -B in usage docs
worktree add: add --orphan flag
worktree add: Add hint to use --orphan when bad ref
Documentation/config/advice.txt | 4 ++
Documentation/git-worktree.txt | 17 ++++++-
advice.c | 1 +
advice.h | 1 +
builtin/worktree.c | 81 ++++++++++++++++++++++++++---
t/t2400-worktree-add.sh | 90 +++++++++++++++++++++++++++++----
6 files changed, 176 insertions(+), 18 deletions(-)
Range-diff against v3:
1: f35d78cfb4 = 1: f35d78cfb4 worktree add: Include -B in usage docs
2: c040c87c6d ! 2: 8b1cdf1322 worktree add: add --orphan flag
@@ Commit message
The original reason this feature was implemented was to allow a user
to initialise a new repository using solely the worktree oriented
- workflow. Example usage included below.
+ workflow.
- $ GIT_DIR=".git" git init --bare
- $ git worktree add --orphan master master/
+ Current Behavior:
+
+ % git init --bare foo.git
+ Initialized empty Git repository in /path/to/foo.git/
+ % git -C foo.git worktree add main/
+ Preparing worktree (new branch 'main')
+ fatal: not a valid object name: 'HEAD'
+ %
+
+ New Behavior:
+
+ % git init --bare foo.git
+ Initialized empty Git repository in /path/to/foo.git/
+ % git -C foo.git worktree add --orphan main main/
+ Preparing worktree (new branch 'main')
+ %
Signed-off-by: Jacob Abel <jacobabel@nullpo.dev>
+ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
## Documentation/git-worktree.txt ##
@@ Documentation/git-worktree.txt: SYNOPSIS
- --------
[verse]
'git worktree add' [-f] [--detach] [--checkout] [--lock [--reason <string>]]
-- [[-b | -B] <new-branch>] <path> [<commit-ish>]
-+ [[-b | -B | --orphan] <new-branch>] <path> [<commit-ish>]
+ [[-b | -B] <new-branch>] <path> [<commit-ish>]
++'git worktree add' [-f] [--lock [--reason <string>]]
++ --orphan <new-branch> <path>
'git worktree list' [-v | --porcelain [-z]]
'git worktree lock' [--reason <string>] <worktree>
'git worktree move' <worktree> <new-path>
@@ Documentation/git-worktree.txt: exist, a new branch based on `HEAD` is automatic
+$ git worktree add --orphan <branch> <path>
+------------
++
-+Create a worktree containing an orphan branch named `<branch>` with a
-+clean working directory. See `--orphan` in linkgit:git-switch[1] for
-+more details.
++Create a worktree containing no files, with an empty index, and associated
++with a new orphan branch named `<branch>`. The first commit made on this new
++branch will have no parents and will be the root of a new history disconnected
++from any other branches.
list::
@@ Documentation/git-worktree.txt: This can also be set up as the default behaviour
remove.
+--orphan <new-branch>::
-+ With `add`, create a new orphan branch named `<new-branch>` in the new
-+ worktree. See `--orphan` in linkgit:git-switch[1] for details.
++ With `add`, make the new worktree and index empty, associating
++ the worktree with a new orphan branch named `<new-branch>`.
+
--porcelain::
With `list`, output in an easy-to-parse format for scripts.
@@ builtin/worktree.c
#define BUILTIN_WORKTREE_ADD_USAGE \
N_("git worktree add [-f] [--detach] [--checkout] [--lock [--reason <string>]]\n" \
- " [[-b | -B] <new-branch>] <path> [<commit-ish>]")
-+ " [[-b | -B | --orphan] <new-branch>] <path> [<commit-ish>]")
++ " [[-b | -B] <new-branch>] <path> [<commit-ish>]"), \
++ N_("git worktree add [-f] [--lock [--reason <string>]]\n" \
++ " --orphan <new-branch> <path>")
++
#define BUILTIN_WORKTREE_LIST_USAGE \
N_("git worktree list [-v | --porcelain [-z]]")
#define BUILTIN_WORKTREE_LOCK_USAGE \
@@ builtin/worktree.c: struct add_opts {
int detach;
int quiet;
int checkout;
-+ const char *orphan_branch;
++ int orphan;
const char *keep_locked;
};
@@ builtin/worktree.c: static int checkout_worktree(const struct add_opts *opts,
return run_command(&cp);
}
-+static int make_worktree_orphan(const struct add_opts *opts,
++static int make_worktree_orphan(const char * ref, const struct add_opts *opts,
+ struct strvec *child_env)
+{
+ int ret;
@@ builtin/worktree.c: static int checkout_worktree(const struct add_opts *opts,
+ struct child_process cp = CHILD_PROCESS_INIT;
+ cp.git_cmd = 1;
+
-+ validate_new_branchname(opts->orphan_branch, &symref, 0);
++ validate_new_branchname(ref, &symref, 0);
+ strvec_pushl(&cp.args, "symbolic-ref", "HEAD", symref.buf, NULL);
+ if (opts->quiet)
+ strvec_push(&cp.args, "--quiet");
@@ builtin/worktree.c: static int add_worktree(const char *path, const char *refnam
}
commit = lookup_commit_reference_by_name(refname);
- if (!commit)
-+ if (!commit && !opts->orphan_branch)
++ if (!commit && !opts->orphan) {
die(_("invalid reference: %s"), refname);
++ }
name = worktree_basename(path, &len);
+ strbuf_add(&sb, name, path + len - name);
@@ builtin/worktree.c: static int add_worktree(const char *path, const char *refname,
strvec_pushf(&child_env, "%s=%s", GIT_WORK_TREE_ENVIRONMENT, path);
cp.git_cmd = 1;
@@ builtin/worktree.c: static int add_worktree(const char *path, const char *refnam
if (ret)
goto done;
-+ if (opts->orphan_branch &&
-+ (ret = make_worktree_orphan(opts, &child_env)))
++ if (opts->orphan &&
++ (ret = make_worktree_orphan(refname, opts, &child_env)))
+ goto done;
+
if (opts->checkout &&
@@ builtin/worktree.c: static int add_worktree(const char *path, const char *refnam
* is_junk is cleared, but do return appropriate code when hook fails.
*/
- if (!ret && opts->checkout) {
-+ if (!ret && opts->checkout && !opts->orphan_branch) {
++ if (!ret && opts->checkout && !opts->orphan) {
struct run_hooks_opt opt = RUN_HOOKS_OPT_INIT;
strvec_pushl(&opt.env, "GIT_DIR", "GIT_WORK_TREE", NULL);
+@@ builtin/worktree.c: static int add(int ac, const char **av, const char *prefix)
+ char *path;
+ const char *branch;
+ const char *new_branch = NULL;
++ const char *orphan_branch = NULL;
+ const char *opt_track = NULL;
+ const char *lock_reason = NULL;
+ int keep_locked = 0;
@@ builtin/worktree.c: static int add(int ac, const char **av, const char *prefix)
N_("create a new branch")),
OPT_STRING('B', NULL, &new_branch_force, N_("branch"),
N_("create or reset a branch")),
-+ OPT_STRING(0, "orphan", &opts.orphan_branch, N_("branch"),
++ OPT_STRING(0, "orphan", &orphan_branch, N_("branch"),
+ N_("new unparented branch")),
OPT_BOOL('d', "detach", &opts.detach, N_("detach HEAD at named commit")),
OPT_BOOL(0, "checkout", &opts.checkout, N_("populate the new working tree")),
OPT_BOOL(0, "lock", &keep_locked, N_("keep the new working tree locked")),
@@ builtin/worktree.c: static int add(int ac, const char **av, const char *prefix)
+ memset(&opts, 0, sizeof(opts));
+ opts.checkout = 1;
ac = parse_options(ac, av, prefix, options, git_worktree_add_usage, 0);
++ opts.orphan = !!orphan_branch;
if (!!opts.detach + !!new_branch + !!new_branch_force > 1)
die(_("options '%s', '%s', and '%s' cannot be used together"), "-b", "-B", "--detach");
-+ if (!!opts.detach + !!new_branch + !!new_branch_force + !!opts.orphan_branch > 1)
++ if (!!opts.detach + !!opts.orphan + !!new_branch + !!new_branch_force > 1)
+ die(_("options '%s', '%s', '%s', and '%s' cannot be used together"),
+ "-b", "-B", "--orphan", "--detach");
-+ if (opts.orphan_branch && opt_track)
++ if (opts.orphan && opt_track)
+ die(_("'%s' and '%s' cannot be used together"), "--orphan", "--track");
-+ if (opts.orphan_branch && !opts.checkout)
++ if (opts.orphan && !opts.checkout)
+ die(_("'%s' and '%s' cannot be used together"), "--orphan",
+ "--no-checkout");
++ if (opts.orphan && ac == 2)
++ die(_("'%s' and '%s' cannot be used together"), "--orphan",
++ _("<commit-ish>"));
if (lock_reason && !keep_locked)
die(_("the option '%s' requires '%s'"), "--reason", "--lock");
if (lock_reason)
@@ builtin/worktree.c: static int add(int ac, const char **av, const char *prefix)
}
- if (ac < 2 && !new_branch && !opts.detach) {
-+ /*
-+ * As the orphan cannot be created until the contents of branch
-+ * are staged, opts.orphan_branch should be treated as both a boolean
-+ * indicating that `--orphan` was selected and as the name of the new
-+ * orphan branch from this point on.
-+ */
-+ if (opts.orphan_branch) {
-+ new_branch = opts.orphan_branch;
-+ }
-+
-+ if (ac < 2 && !new_branch && !opts.detach && !opts.orphan_branch) {
++ if (opts.orphan) {
++ new_branch = orphan_branch;
++ } else if (ac < 2 && !new_branch && !opts.detach) {
const char *s = dwim_branch(path, &new_branch);
if (s)
branch = s;
@@ builtin/worktree.c: static int add(int ac, const char **av, const char *prefix)
print_preparing_worktree_line(opts.detach, branch, new_branch, !!new_branch_force);
- if (new_branch) {
-+ if (new_branch && !opts.orphan_branch) {
++ if (opts.orphan) {
++ branch = new_branch;
++ } else if (!lookup_commit_reference_by_name(branch)) {
++ /*
++ * If `branch` does not reference a valid commit, a new
++ * worktree (and/or branch) cannot be created based off of it.
++ */
++ die(_("invalid reference: %s"), branch);
++ } else if (new_branch) {
struct child_process cp = CHILD_PROCESS_INIT;
cp.git_cmd = 1;
strvec_push(&cp.args, "branch");
## t/t2400-worktree-add.sh ##
-@@ t/t2400-worktree-add.sh: test_expect_success '"add" -B/--detach mutually exclusive' '
- test_must_fail git worktree add -B poodle --detach bamboo main
+@@ t/t2400-worktree-add.sh: test_expect_success '"add" no auto-vivify with --detach and <branch> omitted' '
+ test_must_fail git -C mish/mash symbolic-ref HEAD
'
-+test_expect_success '"add" --orphan/-b mutually exclusive' '
-+ test_must_fail git worktree add --orphan poodle -b poodle bamboo
-+'
-+
-+test_expect_success '"add" --orphan/-B mutually exclusive' '
-+ test_must_fail git worktree add --orphan poodle -B poodle bamboo
-+'
-+
-+test_expect_success '"add" --orphan/--detach mutually exclusive' '
-+ test_must_fail git worktree add --orphan poodle --detach bamboo
-+'
-+
-+test_expect_success '"add" --orphan/--no-checkout mutually exclusive' '
-+ test_must_fail git worktree add --orphan poodle --no-checkout bamboo
-+'
-+
-+test_expect_success '"add" -B/--detach mutually exclusive' '
-+ test_must_fail git worktree add -B poodle --detach bamboo main
-+'
-+
+-test_expect_success '"add" -b/-B mutually exclusive' '
+- test_must_fail git worktree add -b poodle -B poodle bamboo main
+-'
+-
+-test_expect_success '"add" -b/--detach mutually exclusive' '
+- test_must_fail git worktree add -b poodle --detach bamboo main
+-'
++# Helper function to test mutually exclusive options.
++test_wt_add_excl() {
++ local opts="$@" &&
++ test_expect_success "'worktree add' with '$opts' has mutually exclusive options" '
++ test_must_fail git worktree add $opts
++ '
++}
+
+-test_expect_success '"add" -B/--detach mutually exclusive' '
+- test_must_fail git worktree add -B poodle --detach bamboo main
+-'
++test_wt_add_excl -b poodle -B poodle bamboo main
++test_wt_add_excl -b poodle --orphan poodle bamboo
++test_wt_add_excl -b poodle --detach bamboo main
++test_wt_add_excl -B poodle --detach bamboo main
++test_wt_add_excl -B poodle --detach bamboo main
++test_wt_add_excl -B poodle --orphan poodle bamboo
++test_wt_add_excl --orphan poodle --detach bamboo
++test_wt_add_excl --orphan poodle --no-checkout bamboo
++test_wt_add_excl --orphan poodle bamboo main
+
test_expect_success '"add -B" fails if the branch is checked out' '
git rev-parse newmain >before &&
- test_must_fail git worktree add -B newmain bamboo main &&
@@ t/t2400-worktree-add.sh: test_expect_success 'add --quiet' '
test_must_be_empty actual
'
@@ t/t2400-worktree-add.sh: test_expect_success 'add --quiet' '
+ test_when_finished "git worktree remove -f -f orphandir" &&
+ git worktree add -b existingbranch orphandir main &&
+ test_must_fail git worktree add --orphan existingbranch orphandir2 &&
-+ test ! -d orphandir2
++ test_path_is_missing orphandir2
+'
+
+test_expect_success '"add --orphan" with empty repository' '
@@ t/t2400-worktree-add.sh: test_expect_success 'add --quiet' '
+ git -C empty_repo/worktreedir symbolic-ref HEAD >actual &&
+ test_cmp expected actual
+'
++
++test_expect_success '"add" worktree with orphan branch and lock' '
++ git worktree add --lock --orphan orphanbr orphan-with-lock &&
++ test_when_finished "git worktree unlock orphan-with-lock || :" &&
++ test -f .git/worktrees/orphan-with-lock/locked
++'
++
++test_expect_success '"add" worktree with orphan branch, lock, and reason' '
++ lock_reason="why not" &&
++ git worktree add --detach --lock --reason "$lock_reason" orphan-with-lock-reason main &&
++ test_when_finished "git worktree unlock orphan-with-lock-reason || :" &&
++ test -f .git/worktrees/orphan-with-lock-reason/locked &&
++ echo "$lock_reason" >expect &&
++ test_cmp expect .git/worktrees/orphan-with-lock-reason/locked
++'
+
test_expect_success 'local clone from linked checkout' '
git clone --local here here-clone &&
( cd here-clone && git fsck )
+@@ t/t2400-worktree-add.sh: setup_remote_repo () {
+ )
+ }
+
++test_expect_success '"add" <path> <remote/branch> w/ no HEAD' '
++ test_when_finished rm -rf repo_upstream repo_local foo &&
++ setup_remote_repo repo_upstream repo_local &&
++ git -C repo_local config --bool core.bare true &&
++ git -C repo_local branch -D main &&
++ git -C repo_local worktree add ./foo repo_upstream/foo
++'
++
+ test_expect_success '--no-track avoids setting up tracking' '
+ test_when_finished rm -rf repo_upstream repo_local foo &&
+ setup_remote_repo repo_upstream repo_local &&
-: ---------- > 3: 74cb091bb3 worktree add: Add hint to use --orphan when bad ref
--
2.37.4
next prev parent reply other threads:[~2022-12-12 1:42 UTC|newest]
Thread overview: 129+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-04 1:02 [PATCH 0/4] worktree: Support `--orphan` when creating new worktrees Jacob Abel
2022-11-04 1:03 ` [PATCH 1/4] worktree add: Include -B in usage docs Jacob Abel
2022-11-04 3:05 ` Eric Sunshine
2022-11-04 4:24 ` Jacob Abel
2022-11-04 1:03 ` [PATCH 2/4] builtin/worktree.c: Update checkout_worktree() to use git-worktree Jacob Abel
2022-11-04 1:32 ` Ævar Arnfjörð Bjarmason
2022-11-04 3:58 ` Jacob Abel
2022-11-04 20:45 ` Taylor Blau
2022-11-04 1:03 ` [PATCH 3/4] worktree add: add --orphan flag Jacob Abel
2022-11-04 1:33 ` Ævar Arnfjörð Bjarmason
2022-11-04 4:11 ` Jacob Abel
2022-11-04 5:03 ` Eric Sunshine
2022-11-04 16:41 ` Jacob Abel
2022-11-10 4:13 ` Eric Sunshine
2022-11-10 21:21 ` Jacob Abel
2022-11-04 1:03 ` [PATCH 4/4] worktree add: Add unit tests for --orphan Jacob Abel
2022-11-04 1:37 ` Ævar Arnfjörð Bjarmason
2022-11-04 4:17 ` Jacob Abel
2022-11-04 4:33 ` [PATCH 0/4] worktree: Support `--orphan` when creating new worktrees Eric Sunshine
2022-11-04 4:47 ` Jacob Abel
2022-11-04 4:50 ` Jacob Abel
2022-11-04 21:34 ` [PATCH v2 0/2] " Jacob Abel
2022-11-04 21:34 ` [PATCH v2 1/2] worktree add: Include -B in usage docs Jacob Abel
2022-11-04 21:34 ` [PATCH v2 2/2] worktree add: add --orphan flag Jacob Abel
2022-11-10 23:32 ` [PATCH v3 0/2] worktree: Support `--orphan` when creating new worktrees Jacob Abel
2022-11-10 23:32 ` [PATCH v3 1/2] worktree add: Include -B in usage docs Jacob Abel
2022-11-10 23:32 ` [PATCH v3 2/2] worktree add: add --orphan flag Jacob Abel
2022-11-15 21:08 ` Ævar Arnfjörð Bjarmason
2022-11-15 21:29 ` Eric Sunshine
2022-11-15 22:35 ` Ævar Arnfjörð Bjarmason
2022-11-16 0:19 ` Eric Sunshine
2022-11-19 3:13 ` Jacob Abel
2022-11-19 3:09 ` Jacob Abel
2022-11-19 11:50 ` Ævar Arnfjörð Bjarmason
2022-11-19 1:44 ` Jacob Abel
2022-11-22 6:00 ` Eric Sunshine
2022-11-22 23:09 ` Jacob Abel
2022-11-15 22:09 ` Ævar Arnfjörð Bjarmason
2022-11-19 2:57 ` Jacob Abel
2022-11-19 11:50 ` Ævar Arnfjörð Bjarmason
2022-11-16 0:39 ` [PATCH v3 0/2] worktree: Support `--orphan` when creating new worktrees Eric Sunshine
2022-11-17 10:00 ` Ævar Arnfjörð Bjarmason
2022-11-19 3:47 ` Jacob Abel
2022-11-19 11:48 ` Ævar Arnfjörð Bjarmason
2022-11-22 5:16 ` Eric Sunshine
2022-11-22 23:26 ` Jacob Abel
2022-11-22 23:55 ` Ævar Arnfjörð Bjarmason
2022-11-23 2:47 ` Jacob Abel
2022-11-23 2:43 ` Rubén Justo
2022-11-23 5:37 ` Jacob Abel
2022-11-23 7:35 ` Rubén Justo
2022-11-22 14:45 ` Phillip Wood
2022-11-23 4:21 ` Jacob Abel
2022-12-12 1:42 ` Jacob Abel [this message]
2022-12-12 1:42 ` [PATCH v4 1/3] worktree add: Include -B in usage docs Jacob Abel
2022-12-12 1:42 ` [PATCH v4 2/3] worktree add: add --orphan flag Jacob Abel
2022-12-12 8:11 ` Ævar Arnfjörð Bjarmason
2022-12-12 14:55 ` Jacob Abel
2022-12-12 18:14 ` Ævar Arnfjörð Bjarmason
2022-12-12 22:39 ` Jacob Abel
2022-12-12 1:43 ` [PATCH v4 3/3] worktree add: Add hint to use --orphan when bad ref Jacob Abel
2022-12-12 8:35 ` Ævar Arnfjörð Bjarmason
2022-12-12 14:59 ` Jacob Abel
2022-12-12 18:16 ` Ævar Arnfjörð Bjarmason
2022-12-12 18:35 ` Eric Sunshine
2022-12-12 22:36 ` Jacob Abel
2022-12-12 22:38 ` Jacob Abel
2022-12-20 2:37 ` [PATCH v5 0/4] worktree: Support `--orphan` when creating new worktrees Jacob Abel
2022-12-20 2:37 ` [PATCH v5 1/4] worktree add: Include -B in usage docs Jacob Abel
2022-12-20 3:42 ` Junio C Hamano
2022-12-20 23:24 ` Jacob Abel
2022-12-20 2:37 ` [PATCH v5 2/4] worktree add: refactor opt exclusion tests Jacob Abel
2022-12-20 4:00 ` Junio C Hamano
2022-12-20 23:29 ` Jacob Abel
2022-12-20 2:38 ` [PATCH v5 3/4] worktree add: add --orphan flag Jacob Abel
2022-12-20 4:19 ` Junio C Hamano
2022-12-21 0:17 ` Jacob Abel
2022-12-20 2:38 ` [PATCH v5 4/4] worktree add: Add hint to use --orphan when bad ref Jacob Abel
2022-12-20 6:18 ` Junio C Hamano
2022-12-21 0:42 ` Jacob Abel
2022-12-28 6:16 ` [PATCH v6 0/4] worktree: Support `--orphan` when creating new worktrees Jacob Abel
2022-12-28 6:16 ` [PATCH v6 1/4] worktree add: include -B in usage docs Jacob Abel
2022-12-28 6:16 ` [PATCH v6 2/4] worktree add: refactor opt exclusion tests Jacob Abel
2022-12-28 12:54 ` Junio C Hamano
2022-12-29 6:51 ` Jacob Abel
2022-12-29 10:07 ` Junio C Hamano
2022-12-29 20:48 ` Jacob Abel
2023-01-06 6:31 ` Jacob Abel
2023-01-06 12:34 ` Junio C Hamano
2023-01-07 4:45 ` Jacob Abel
2022-12-28 6:17 ` [PATCH v6 3/4] worktree add: add --orphan flag Jacob Abel
2022-12-28 6:17 ` [PATCH v6 4/4] worktree add: add hint to direct users towards --orphan Jacob Abel
2023-01-06 14:19 ` Phillip Wood
2022-12-28 8:01 ` [PATCH v6 0/4] worktree: Support `--orphan` when creating new worktrees Ævar Arnfjörð Bjarmason
2022-12-29 6:38 ` Jacob Abel
2022-12-29 10:42 ` Ævar Arnfjörð Bjarmason
2022-12-29 21:22 ` Jacob Abel
2023-01-07 4:58 ` [PATCH v7 " Jacob Abel
2023-01-07 4:59 ` [PATCH v7 1/4] worktree add: include -B in usage docs Jacob Abel
2023-01-07 4:59 ` [PATCH v7 2/4] worktree add: refactor opt exclusion tests Jacob Abel
2023-01-08 7:13 ` Junio C Hamano
2023-01-08 15:08 ` Jacob Abel
2023-01-07 4:59 ` [PATCH v7 3/4] worktree add: add --orphan flag Jacob Abel
2023-01-07 4:59 ` [PATCH v7 4/4] worktree add: add hint to direct users towards --orphan Jacob Abel
2023-01-09 12:26 ` [PATCH v7 0/4] worktree: Support `--orphan` when creating new worktrees Ævar Arnfjörð Bjarmason
2023-01-09 17:11 ` Jacob Abel
2023-01-09 17:21 ` Ævar Arnfjörð Bjarmason
2023-01-09 17:26 ` Jacob Abel
2023-01-09 17:32 ` [PATCH v8 " Jacob Abel
2023-01-09 17:32 ` [PATCH v8 1/4] worktree add: include -B in usage docs Jacob Abel
2023-01-09 17:33 ` [PATCH v8 2/4] worktree add: refactor opt exclusion tests Jacob Abel
2023-01-09 17:33 ` [PATCH v8 3/4] worktree add: add --orphan flag Jacob Abel
2023-01-13 10:20 ` Phillip Wood
2023-01-13 17:32 ` Junio C Hamano
2023-01-14 22:47 ` Jacob Abel
2023-01-15 3:09 ` Junio C Hamano
2023-01-15 3:41 ` rsbecker
2023-01-15 3:49 ` Junio C Hamano
2023-01-18 22:46 ` 'Jacob Abel'
2023-01-18 22:18 ` Jacob Abel
2023-01-19 15:32 ` Ævar Arnfjörð Bjarmason
2023-01-19 16:32 ` Junio C Hamano
2023-01-16 10:47 ` Phillip Wood
2023-01-18 22:40 ` Jacob Abel
2023-01-19 16:18 ` Phillip Wood
2023-01-19 22:20 ` Jacob Abel
2023-01-09 17:33 ` [PATCH v8 4/4] worktree add: add hint to direct users towards --orphan Jacob Abel
2023-01-09 19:20 ` [PATCH v8 0/4] worktree: Support `--orphan` when creating new worktrees Ævar Arnfjörð Bjarmason
2023-01-13 17:34 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221212014003.20290-1-jacobabel@nullpo.dev \
--to=jacobabel@nullpo.dev \
--cc=avarab@gmail.com \
--cc=git@vger.kernel.org \
--cc=me@ttaylorr.com \
--cc=phillip.wood123@gmail.com \
--cc=rjusto@gmail.com \
--cc=rsbecker@nexbridge.com \
--cc=sunshine@sunshineco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).