From: Nicolas Piatto <nico@lodpp.net>
To: bridge@lists.linux-foundation.org
Subject: [Bridge] bridge issue with ARP and FDB update between 4.9.142 and 4.9.315
Date: Fri, 3 Jun 2022 17:50:57 +0200 [thread overview]
Message-ID: <00be2217-40f4-c15b-409b-8b412ac411c8@lodpp.net> (raw)
Hello,
We have a strange behavior of the linux bridge regarding ARP and FDB update.
We could see the change first between 4.9.142 and 5.15.11.
Then we were able to replicate with 4.9.315 which is reducing the search
field to a single kernel line (still huge work of digging)
We have seen a huge amount of `unknown unicast flood` on nodes running
the newer kernel version.
So far we didn't found from which commit(s) is(are) responsible, that's
why we try to get help here.
Let me explain the context and network design first:
We use 2 routers, SVIs and GLBP [1] as first-hop redundancy protocol on
them. Those routers provide connectivity to VMs running on Linux nodes.
The networking is fairly simple, the Linux node act as a simple bridge
(actually one bridge per vlan) between the router and VMs.
|--- Cisco hw devices --------|--- linux node -------------|
+--------------------------+
+----+ | +--------+ +-----+ |
| R1 |------------------------|---| bridge |---| VMx | |
+----+ | | | |
+----+ | | | +-----+ |
| R2 |------------------------|---| |---| VMy | |
+----+ | +--------+ +-----+ |
| |
+--------------------------+
Assuming this:
- The subnet configured on SVI is a /24
- MAC addresses provided are for explanation only.
- GLBP AVG: Active Virtual Gateway, one of the router is elected to
reply to ARP
requests
- GLBP AVF: Active Virtual Forwarder, each router is assigned a virtual
MAC and is
responsible to forward/route traffic for that MAC.
GLBP Virtual IP: .254 (default-gateway for VMs)
R1 is AVG
R1 SVI ip: .252
R1 SVI mac: 00:00:00:00:11:11
R1 AVF mac: 11:11:11:11:11:11
R2 SVI ip: .253
R2 SVI mac: 00:00:00:00:22:22
R2 AVF mac: 22:22:22:22:22:22
GLBP as a particular way of working with ARP (but it's in the
protocol...). When the Active Virtual Gateway (AVG) replies to an ARP
request from a VM, it does so by sourcing the ARP reply packet from the
router's SVI MAC address, while it puts the AVF as Source inside the ARP
packet payload.
GLBP never sends packet nor it sends gratuitous ARP sourced from an AVF MAC.
On 4.9.142, when a VM perform an ARP request for the GW, the AVG replies
and the bridge updates the FDB with the
AVF MAC (11:11:11:11:11:11 or 22:22:22:22:22:22) <-> interface.
The VM gets also the ARP reply and updates its ARP cache based on the
ARP payload (AVF MAC).
-> Now when the VM can send traffic toward the GW MAC address, the
bridge does the FDB lookup and forward accordingly.
On 4.9.345, when a VM perform an ARP request for the GW, the AVG replies
and the bridge updates the FDB with the
SVI MAC (00:00:00:00:11:11) <-> interface (not the AVF MAC).
The VM gets also the ARP reply and updates its ARP cache based on the
ARP Payload (AVF MAC).
Now the VM sends traffic toward the GW MAC address, the bridge does the
FDB lookup for the AVF MAC - which fails - and flood the traffic everywhere.
As a side note, the behavior on 4.9.12 is also what we see with HW
switch, aka the CAM is updated as well with the AVF MAC <-> interface.
To workaround this, we have moved from GLBP to HSRP.
As we are not very familiar with C and the netdev codebase is huge, we
could not find the packet path for unicast packet (ARP replies are
unicast) within a pure L2 bridge to find a lead...
Here is a capture of search ARP reply packet in our lab to reproduce
(vms + l2vpn setup between them):
Forged packet with scapi
```
sendp(Ether(dst='9a:d0:e7:09:8c:9e', src='22:8e:b6:cd:54:34') /
ARP(op='is-at', hwsrc='00:07:b4:00:29:02', psrc='198.18.0.20',
hwdst='9a:d0:e7:09:8c:9e', pdst=ipv4d), iface='l2tpeth0')
```
and the capture
```
15:37:21.567196 22:8e:b6:cd:54:34 (oui Unknown) > 9a:d0:e7:09:8c:9e (oui
Unknown), ethertype ARP (0x0806), length 42: Reply 198.18.0.2 is-at
00:07:b4:00:29:02 (oui Unknown), length 28
```
With 4.9.315, we can see that 00:07:b4:00:29:02 is not found in FDB, but
22:8e:b6:cd:54:34 is.
Any help is welcome and appreciated on how to work on this !
Thanks and best regards,
Nicolas
[1] https://en.wikipedia.org/wiki/Gateway_Load_Balancing_Protocol
next reply other threads:[~2022-06-03 15:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-03 15:50 Nicolas Piatto [this message]
2022-06-10 8:19 ` [Bridge] bridge issue with ARP and FDB update between 4.9.142 and 4.9.315 Nicolas Piatto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00be2217-40f4-c15b-409b-8b412ac411c8@lodpp.net \
--to=nico@lodpp.net \
--cc=bridge@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).