From: Lingbo Kong <quic_lingbok@quicinc.com>
To: <ath12k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <quic_lingbok@quicinc.com>
Subject: [PATCH] wifi: ath12k: fix the problem that down grade phy mode operation
Date: Thu, 25 Apr 2024 16:38:37 +0800 [thread overview]
Message-ID: <20240425083837.5340-1-quic_lingbok@quicinc.com> (raw)
Currently, when using WCN7850 or QCN9274 as AP, ath12k always performs down
grade phy mode operation regardless of whether the firmware supports EHT
capability or not and then vdev will start in HE mode. When stations that
support EHT capability try to connect to the AP, the AP will set phy mode
to EHT after receiving the association request packet, and then send
WMI_PEER_ASSOC_CMDID command to firmware, AP’s firmware will crash.
This is because when the ath12k_mac_copy_sband_iftype_data() function
handles EHT capability, it does not copy the EHT capability into the
iftype[band][type] array according to the interface type. So, interface
type should not be used as an index to get eht_cap in
ath12k_mac_check_down_grade_phy_mode() function.
To address this issue, use types_mask to select the eht_cap in
ath12k_mac_check_down_grade_phy_mode() function.
This patch affects QCN9274 and WCN7850 because they have the same issue.
Hostapd log:
wlo1: STA 02:03:7f:37:12:34 IEEE 802.11: Could not set STA to kernel driver
Kernel log:
[270894.816076] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_SET_PARAM cmd
[270894.816111] ath12k_pci 0000:03:00.0: failed to setup peer SMPS for vdev 0: -108
[270894.816122] ath12k_pci 0000:03:00.0: Failed to associate station: 02:03:7f:37:12:34
[270894.843389] ieee80211 phy5: Hardware restart was requested
[270894.843517] ath12k_pci 0000:03:00.0: failed to lookup peer 02:03:7f:37:12:34 on vdev 0
[270894.843616] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_DELETE cmd
[270894.843650] ath12k_pci 0000:03:00.0: failed to delete peer vdev_id 0 addr 02:03:7f:37:12:34 ret -108
[270894.843663] ath12k_pci 0000:03:00.0: Failed to delete peer: 02:03:7f:37:12:34 for VDEV: 0
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
---
drivers/net/wireless/ath/ath12k/mac.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 56b1f8b6844e..805cb084484a 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -6754,14 +6754,24 @@ ath12k_mac_check_down_grade_phy_mode(struct ath12k *ar,
enum nl80211_band band,
enum nl80211_iftype type)
{
- struct ieee80211_sta_eht_cap *eht_cap;
+ struct ieee80211_sta_eht_cap *eht_cap = NULL;
enum wmi_phy_mode down_mode;
+ int n = ar->mac.sbands[band].n_iftype_data;
+ int i;
+ struct ieee80211_sband_iftype_data *data;
if (mode < MODE_11BE_EHT20)
return mode;
- eht_cap = &ar->mac.iftype[band][type].eht_cap;
- if (eht_cap->has_eht)
+ data = ar->mac.iftype[band];
+ for (i = 0; i < n; i++) {
+ if (data[i].types_mask & BIT(type)) {
+ eht_cap = &data[i].eht_cap;
+ break;
+ }
+ }
+
+ if (eht_cap && eht_cap->has_eht)
return mode;
switch (mode) {
base-commit: 326f8f68f28b0b831233acfabffb486a5b0f4717
--
2.34.1
next reply other threads:[~2024-04-25 8:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-25 8:38 Lingbo Kong [this message]
2024-04-25 22:10 ` [PATCH] wifi: ath12k: fix the problem that down grade phy mode operation Jeff Johnson
2024-04-25 22:16 ` Jeff Johnson
2024-05-02 10:16 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240425083837.5340-1-quic_lingbok@quicinc.com \
--to=quic_lingbok@quicinc.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).