From: Kang Yang <quic_kangyang@quicinc.com>
To: <ath12k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <quic_kangyang@quicinc.com>
Subject: [PATCH 2/2] wifi: ath12k: dynamically update puncturing bitmap
Date: Tue, 12 Mar 2024 12:59:47 +0800 [thread overview]
Message-ID: <20240312045947.576231-3-quic_kangyang@quicinc.com> (raw)
In-Reply-To: <20240312045947.576231-1-quic_kangyang@quicinc.com>
Every time EHT Operation element changed, mac80211 will parse it and
extract the valid puncturing bitmap according to the bandwidth.
So update bandwidth and puncturing bitmap once they changed. Then
send them to the firmware by WMI event.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
---
drivers/net/wireless/ath/ath12k/mac.c | 58 +++++++++++++++++++++++++++
drivers/net/wireless/ath/ath12k/wmi.h | 16 ++++++++
2 files changed, 74 insertions(+)
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index 52a5fb8b03e9..94ebc14e7f35 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -6502,6 +6502,54 @@ ath12k_mac_change_chanctx_fill_iter(void *data, u8 *mac,
arg->next_vif++;
}
+static u32 ath12k_mac_nlwidth_to_wmiwidth(enum nl80211_chan_width width)
+{
+ switch (width) {
+ case NL80211_CHAN_WIDTH_20:
+ return WMI_CHAN_WIDTH_20;
+ case NL80211_CHAN_WIDTH_40:
+ return WMI_CHAN_WIDTH_40;
+ case NL80211_CHAN_WIDTH_80:
+ return WMI_CHAN_WIDTH_80;
+ case NL80211_CHAN_WIDTH_160:
+ return WMI_CHAN_WIDTH_160;
+ case NL80211_CHAN_WIDTH_80P80:
+ return WMI_CHAN_WIDTH_80P80;
+ case NL80211_CHAN_WIDTH_5:
+ return WMI_CHAN_WIDTH_5;
+ case NL80211_CHAN_WIDTH_10:
+ return WMI_CHAN_WIDTH_10;
+ case NL80211_CHAN_WIDTH_320:
+ return WMI_CHAN_WIDTH_320;
+ default:
+ WARN_ON(1);
+ return WMI_CHAN_WIDTH_20;
+ }
+}
+
+static int ath12k_mac_update_peer_puncturing_width(struct ath12k *ar,
+ struct ath12k_vif *arvif,
+ struct cfg80211_chan_def def)
+{
+ u32 param_id, param_value;
+ int ret;
+
+ param_id = WMI_PEER_CHWIDTH_PUNCTURE_20MHZ_BITMAP;
+ param_value = ath12k_mac_nlwidth_to_wmiwidth(def.width) |
+ u32_encode_bits((~def.punctured),
+ WMI_PEER_PUNCTURE_BITMAP);
+
+ ath12k_dbg(ar->ab, ATH12K_DBG_MAC,
+ "Set puncturing bitmap %02x and width %d for vdev: %d\n",
+ def.punctured, def.width, arvif->vdev_id);
+
+ ret = ath12k_wmi_set_peer_param(ar, arvif->bssid,
+ arvif->vdev_id, param_id,
+ param_value);
+
+ return ret;
+}
+
static void
ath12k_mac_update_vif_chan(struct ath12k *ar,
struct ieee80211_vif_chanctx_switch *vifs,
@@ -6594,6 +6642,16 @@ ath12k_mac_update_vif_chan(struct ath12k *ar,
arvif->vdev_id, ret);
continue;
}
+
+ ret = ath12k_mac_update_peer_puncturing_width(arvif->ar, arvif,
+ vifs[i].new_ctx->def);
+ if (ret) {
+ ath12k_warn(ar->ab,
+ "failed to update puncturing bitmap %02x and width %d: %d\n",
+ vifs[i].new_ctx->def.punctured,
+ vifs[i].new_ctx->def.width, ret);
+ continue;
+ }
}
/* Restart the internal monitor vdev on new channel */
diff --git a/drivers/net/wireless/ath/ath12k/wmi.h b/drivers/net/wireless/ath/ath12k/wmi.h
index 103462feb935..d0599a6dce4d 100644
--- a/drivers/net/wireless/ath/ath12k/wmi.h
+++ b/drivers/net/wireless/ath/ath12k/wmi.h
@@ -2199,8 +2199,11 @@ enum wmi_peer_param {
WMI_PEER_SET_MAX_TX_RATE = 17,
WMI_PEER_SET_MIN_TX_RATE = 18,
WMI_PEER_SET_DEFAULT_ROUTING = 19,
+ WMI_PEER_CHWIDTH_PUNCTURE_20MHZ_BITMAP = 39,
};
+#define WMI_PEER_PUNCTURE_BITMAP GENMASK(23, 8)
+
enum wmi_slot_time {
WMI_VDEV_SLOT_TIME_LONG = 1,
WMI_VDEV_SLOT_TIME_SHORT = 2,
@@ -2604,6 +2607,19 @@ struct ath12k_wmi_soc_hal_reg_caps_params {
__le32 num_phy;
} __packed;
+enum wmi_channel_width {
+ WMI_CHAN_WIDTH_20 = 0,
+ WMI_CHAN_WIDTH_40 = 1,
+ WMI_CHAN_WIDTH_80 = 2,
+ WMI_CHAN_WIDTH_160 = 3,
+ WMI_CHAN_WIDTH_80P80 = 4,
+ WMI_CHAN_WIDTH_5 = 5,
+ WMI_CHAN_WIDTH_10 = 6,
+ WMI_CHAN_WIDTH_165 = 7,
+ WMI_CHAN_WIDTH_160P160 = 8,
+ WMI_CHAN_WIDTH_320 = 9,
+};
+
#define WMI_MAX_EHTCAP_MAC_SIZE 2
#define WMI_MAX_EHTCAP_PHY_SIZE 3
#define WMI_MAX_EHTCAP_RATE_SET 3
--
2.34.1
next prev parent reply other threads:[~2024-03-12 5:01 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-12 4:59 [PATCH 0/2] wifi: ath12k: dynamically update puncturing bitmap Kang Yang
2024-03-12 4:59 ` [PATCH 1/2] wifi: mac80211: supplement parsing of " Kang Yang
2024-03-12 8:16 ` Johannes Berg
2024-03-12 8:45 ` Kang Yang
2024-03-12 9:22 ` Kang Yang
2024-03-12 10:17 ` Johannes Berg
2024-03-14 3:21 ` Kang Yang
2024-03-14 8:03 ` Johannes Berg
2024-03-12 4:59 ` Kang Yang [this message]
2024-03-18 8:56 ` [PATCH 2/2] wifi: ath12k: dynamically update " Kang Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240312045947.576231-3-quic_kangyang@quicinc.com \
--to=quic_kangyang@quicinc.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).