From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Kang Yang <quic_kangyang@quicinc.com>,
Jeff Johnson <quic_jjohnson@quicinc.com>,
Kalle Valo <quic_kvalo@quicinc.com>,
Sasha Levin <sashal@kernel.org>,
kvalo@kernel.org, ath12k@lists.infradead.org,
linux-wireless@vger.kernel.org
Subject: [PATCH AUTOSEL 6.7 040/108] wifi: ath12k: fix and enable AP mode for WCN7850
Date: Tue, 16 Jan 2024 14:39:06 -0500 [thread overview]
Message-ID: <20240116194225.250921-40-sashal@kernel.org> (raw)
In-Reply-To: <20240116194225.250921-1-sashal@kernel.org>
From: Kang Yang <quic_kangyang@quicinc.com>
[ Upstream commit ed7e818a7b501012038d6bc6fedadaf7375a380a ]
For AP mode, the peer is created earlier in ath12k_mac_op_add_interface() but
ath12k_mac_op_assign_vif_chanctx() will try to create peer again. Then an
error will return which makes AP mode startup fail.
Kernel log:
[ 5017.665006] ath12k_pci 0000:04:00.0: failed to create peer after vdev start delay: -22
wpa_supplicant log:
Failed to set beacon parameters
Interface initialization failed
wls1: interface state UNINITIALIZED->DISABLED
wls1: AP-DISABLED
wls1: Unable to setup interface.
Failed to initialize AP interface
wls1: interface state DISABLED->DISABLED
wls1: AP-DISABLED
So fix this check and enable AP mode for WCN7850, as now AP mode works normally.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20231121022459.17209-1-quic_kangyang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath12k/hw.c | 3 ++-
drivers/net/wireless/ath/ath12k/mac.c | 4 ++--
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath12k/hw.c b/drivers/net/wireless/ath/ath12k/hw.c
index 2245fb510ba2..b55cf33e37bd 100644
--- a/drivers/net/wireless/ath/ath12k/hw.c
+++ b/drivers/net/wireless/ath/ath12k/hw.c
@@ -949,7 +949,8 @@ static const struct ath12k_hw_params ath12k_hw_params[] = {
.rx_mac_buf_ring = true,
.vdev_start_delay = true,
- .interface_modes = BIT(NL80211_IFTYPE_STATION),
+ .interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
.supports_monitor = false,
.idle_ps = true,
diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index fc0d14ea328e..b698e55a5b7b 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -6380,8 +6380,8 @@ ath12k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
}
if (ab->hw_params->vdev_start_delay &&
- (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
- arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)) {
+ arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+ arvif->vdev_type != WMI_VDEV_TYPE_MONITOR) {
param.vdev_id = arvif->vdev_id;
param.peer_type = WMI_PEER_TYPE_DEFAULT;
param.peer_addr = ar->mac_addr;
--
2.43.0
next parent reply other threads:[~2024-01-16 19:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240116194225.250921-1-sashal@kernel.org>
2024-01-16 19:39 ` Sasha Levin [this message]
2024-01-16 19:39 ` [PATCH AUTOSEL 6.7 054/108] wifi: ath12k: fix the issue that the multicast/broadcast indicator is not read correctly for WCN7850 Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240116194225.250921-40-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=ath12k@lists.infradead.org \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_jjohnson@quicinc.com \
--cc=quic_kangyang@quicinc.com \
--cc=quic_kvalo@quicinc.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).