* Looking for How To for New PPC Board
@ 1999-01-29 22:01 Cory Myers
0 siblings, 0 replies; only message in thread
From: Cory Myers @ 1999-01-29 22:01 UTC (permalink / raw
To: linuxppc-dev
My group is developing a PCI-based board containing a PPC750 and some
special hardware. We are considering alternative operating systems for the
PPC 750 and would like to determine if Linux is a viable alternative. I am
looking for reference material or assistance in figuring this out. The
board we are developing will have a PPC 750, an MPC 106 PCI bus
interface/memory controller, a small flash, and an FPGA with UART, Timers,
and Interrupt controllers. The board does not contain a network interface,
peripheral interfaces, or a display interface. The minimal operational
model is that the board can be "networked" to from the host PC.
It is possible to use/modify Linux to run in such an environment?
Please send you comments to me directly since I am not a regular reader of
this mailing list.
Thanks in advance.
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~1999-01-29 22:01 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-01-29 22:01 Looking for How To for New PPC Board Cory Myers
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.