* [PATCH v3 0/5] Add definitions for AST2600 i3c clocks and resets
@ 2023-02-13 13:24 Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 1/5] clk: ast2600: allow empty entries in aspeed_g6_gates Jeremy Kerr
` (4 more replies)
0 siblings, 5 replies; 9+ messages in thread
From: Jeremy Kerr @ 2023-02-13 13:24 UTC (permalink / raw
To: linux-aspeed, linux-clk
Cc: devicetree, Krzysztof Kozlowski, Michael Turquette, Rob Herring,
Stephen Boyd, Dylan Hung, Joel Stanley, Andrew Jeffery
This series adds some base configuration for the i3c controllers on
ast2600 hardware. We'll use the reset and clock definitions in the
proposed dt binding example, hence sending these first.
v3:
- split dt-bindings from clk changes
- unify subject prefixes
v2:
- based on feedback from Joel Stanley: avoid adding RESERVED clock
definitions, allowing empty entries in aspeed_g6_gates instead.
Jeremy Kerr (5):
clk: ast2600: allow empty entries in aspeed_g6_gates
dt-bindings: clock: ast2600: Add top-level I3C clock
clk: ast2600: Add full configs for I3C clocks
dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions
dt-bindings: clock: ast2600: Add reset config for I3C
drivers/clk/clk-ast2600.c | 41 ++++++++++++++++++-----
include/dt-bindings/clock/ast2600-clock.h | 9 +++--
2 files changed, 40 insertions(+), 10 deletions(-)
--
2.39.1
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v3 1/5] clk: ast2600: allow empty entries in aspeed_g6_gates
2023-02-13 13:24 [PATCH v3 0/5] Add definitions for AST2600 i3c clocks and resets Jeremy Kerr
@ 2023-02-13 13:24 ` Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 2/5] dt-bindings: clock: ast2600: Add top-level I3C clock Jeremy Kerr
` (3 subsequent siblings)
4 siblings, 0 replies; 9+ messages in thread
From: Jeremy Kerr @ 2023-02-13 13:24 UTC (permalink / raw
To: linux-aspeed, linux-clk
Cc: devicetree, Krzysztof Kozlowski, Michael Turquette, Rob Herring,
Stephen Boyd, Dylan Hung, Joel Stanley, Andrew Jeffery
We're about to remove an entry from aspeed_g6_gates, but we won't want
to alter/reorder existing entries. Allow empty entries in this array.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
---
v3:
- reword commit message
---
drivers/clk/clk-ast2600.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index 9c3305bcb27a..1f08ff3c60fa 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -652,6 +652,9 @@ static int aspeed_g6_clk_probe(struct platform_device *pdev)
const struct aspeed_gate_data *gd = &aspeed_g6_gates[i];
u32 gate_flags;
+ if (!gd->name)
+ continue;
+
/*
* Special case: the USB port 1 clock (bit 14) is always
* working the opposite way from the other ones.
--
2.39.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v3 2/5] dt-bindings: clock: ast2600: Add top-level I3C clock
2023-02-13 13:24 [PATCH v3 0/5] Add definitions for AST2600 i3c clocks and resets Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 1/5] clk: ast2600: allow empty entries in aspeed_g6_gates Jeremy Kerr
@ 2023-02-13 13:24 ` Jeremy Kerr
2023-02-13 13:42 ` Krzysztof Kozlowski
2023-02-13 13:24 ` [PATCH v3 3/5] clk: ast2600: Add full configs for I3C clocks Jeremy Kerr
` (2 subsequent siblings)
4 siblings, 1 reply; 9+ messages in thread
From: Jeremy Kerr @ 2023-02-13 13:24 UTC (permalink / raw
To: linux-aspeed, linux-clk
Cc: devicetree, Krzysztof Kozlowski, Michael Turquette, Rob Herring,
Stephen Boyd, Dylan Hung, Joel Stanley, Andrew Jeffery
The ast2600 hardware has a top-level clock for all i3c controller
peripherals (then gated to each individual controller), so add a
top-level i3c clock line to control this.
This is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7
from Aspeed's own tree, originally by Dylan Hung
<dylan_hung@aspeedtech.com>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
---
v3:
- split into separate bindings & clk changes
v2:
- reword commit message
---
include/dt-bindings/clock/ast2600-clock.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/dt-bindings/clock/ast2600-clock.h b/include/dt-bindings/clock/ast2600-clock.h
index d8b0db2f7a7d..608ce576e63e 100644
--- a/include/dt-bindings/clock/ast2600-clock.h
+++ b/include/dt-bindings/clock/ast2600-clock.h
@@ -87,6 +87,7 @@
#define ASPEED_CLK_MAC2RCLK 68
#define ASPEED_CLK_MAC3RCLK 69
#define ASPEED_CLK_MAC4RCLK 70
+#define ASPEED_CLK_I3C 74
/* Only list resets here that are not part of a gate */
#define ASPEED_RESET_ADC 55
--
2.39.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v3 3/5] clk: ast2600: Add full configs for I3C clocks
2023-02-13 13:24 [PATCH v3 0/5] Add definitions for AST2600 i3c clocks and resets Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 1/5] clk: ast2600: allow empty entries in aspeed_g6_gates Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 2/5] dt-bindings: clock: ast2600: Add top-level I3C clock Jeremy Kerr
@ 2023-02-13 13:24 ` Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 4/5] dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 5/5] dt-bindings: clock: ast2600: Add reset config for I3C Jeremy Kerr
4 siblings, 0 replies; 9+ messages in thread
From: Jeremy Kerr @ 2023-02-13 13:24 UTC (permalink / raw
To: linux-aspeed, linux-clk
Cc: devicetree, Krzysztof Kozlowski, Michael Turquette, Rob Herring,
Stephen Boyd, Dylan Hung, Joel Stanley, Andrew Jeffery
The current ast2600 I3C clock definitions are top-level (rather than
based on their actual hw sources: either HCLK or APLL), and include a
couple of definitions for (non-existent) i3c6 and i3c7.
Re-parent the individual I3C controller clocks to the main i3c clock,
explicitly sourced from the APLL rather than whatever G6_CLK_SELECTION5
was last set to.
While we're at it, remove the definitions for the i3c6 and i3c7 clock
lines; this hardware isn't present.
This is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7
from Aspeed's own tree, originally by Dylan Hung
<dylan_hung@aspeedtech.com>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
---
v3:
- split dt-bindings and clk changes
v2:
- reword commit message
---
drivers/clk/clk-ast2600.c | 38 ++++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index 1f08ff3c60fa..45549cb18107 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -4,6 +4,7 @@
#define pr_fmt(fmt) "clk-ast2600: " fmt
+#include <linux/bitfield.h>
#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
@@ -32,6 +33,18 @@
#define ASPEED_G6_CLK_SELECTION1 0x300
#define ASPEED_G6_CLK_SELECTION2 0x304
#define ASPEED_G6_CLK_SELECTION4 0x310
+#define ASPEED_G6_CLK_SELECTION5 0x314
+#define I3C_CLK_SELECTION BIT(31)
+#define I3C_CLK_SELECT_HCLK 0
+#define I3C_CLK_SELECT_APLL_DIV 1
+#define APLL_DIV_SELECTION GENMASK(30, 28)
+#define APLL_DIV_2 0b001
+#define APLL_DIV_3 0b010
+#define APLL_DIV_4 0b011
+#define APLL_DIV_5 0b100
+#define APLL_DIV_6 0b101
+#define APLL_DIV_7 0b110
+#define APLL_DIV_8 0b111
#define ASPEED_HPLL_PARAM 0x200
#define ASPEED_APLL_PARAM 0x210
@@ -97,14 +110,13 @@ static const struct aspeed_gate_data aspeed_g6_gates[] = {
[ASPEED_CLK_GATE_LHCCLK] = { 37, -1, "lhclk-gate", "lhclk", 0 }, /* LPC master/LPC+ */
/* Reserved 38 RSA: no longer used */
/* Reserved 39 */
- [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", NULL, 0 }, /* I3C0 */
- [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", NULL, 0 }, /* I3C1 */
- [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", NULL, 0 }, /* I3C2 */
- [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", NULL, 0 }, /* I3C3 */
- [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", NULL, 0 }, /* I3C4 */
- [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", NULL, 0 }, /* I3C5 */
- [ASPEED_CLK_GATE_I3C6CLK] = { 46, 46, "i3c6clk-gate", NULL, 0 }, /* I3C6 */
- [ASPEED_CLK_GATE_I3C7CLK] = { 47, 47, "i3c7clk-gate", NULL, 0 }, /* I3C7 */
+ [ASPEED_CLK_GATE_I3C0CLK] = { 40, 40, "i3c0clk-gate", "i3cclk", 0 }, /* I3C0 */
+ [ASPEED_CLK_GATE_I3C1CLK] = { 41, 41, "i3c1clk-gate", "i3cclk", 0 }, /* I3C1 */
+ [ASPEED_CLK_GATE_I3C2CLK] = { 42, 42, "i3c2clk-gate", "i3cclk", 0 }, /* I3C2 */
+ [ASPEED_CLK_GATE_I3C3CLK] = { 43, 43, "i3c3clk-gate", "i3cclk", 0 }, /* I3C3 */
+ [ASPEED_CLK_GATE_I3C4CLK] = { 44, 44, "i3c4clk-gate", "i3cclk", 0 }, /* I3C4 */
+ [ASPEED_CLK_GATE_I3C5CLK] = { 45, 45, "i3c5clk-gate", "i3cclk", 0 }, /* I3C5 */
+ /* Reserved: 46 & 47 */
[ASPEED_CLK_GATE_UART1CLK] = { 48, -1, "uart1clk-gate", "uart", 0 }, /* UART1 */
[ASPEED_CLK_GATE_UART2CLK] = { 49, -1, "uart2clk-gate", "uart", 0 }, /* UART2 */
[ASPEED_CLK_GATE_UART3CLK] = { 50, -1, "uart3clk-gate", "uart", 0 }, /* UART3 */
@@ -775,6 +787,16 @@ static void __init aspeed_g6_cc(struct regmap *map)
/* USB 2.0 port1 phy 40MHz clock */
hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000);
aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw;
+
+ /* i3c clock: source from apll, divide by 8 */
+ regmap_read(map, ASPEED_G6_CLK_SELECTION5, &val);
+ val &= ~(I3C_CLK_SELECTION | APLL_DIV_SELECTION);
+ val |= FIELD_PREP(I3C_CLK_SELECTION, I3C_CLK_SELECT_APLL_DIV);
+ val |= FIELD_PREP(APLL_DIV_SELECTION, APLL_DIV_8);
+ regmap_write(map, ASPEED_G6_CLK_SELECTION5, val);
+
+ hw = clk_hw_register_fixed_factor(NULL, "i3cclk", "apll", 0, 1, 8);
+ aspeed_g6_clk_data->hws[ASPEED_CLK_I3C] = hw;
};
static void __init aspeed_g6_cc_init(struct device_node *np)
--
2.39.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v3 4/5] dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions
2023-02-13 13:24 [PATCH v3 0/5] Add definitions for AST2600 i3c clocks and resets Jeremy Kerr
` (2 preceding siblings ...)
2023-02-13 13:24 ` [PATCH v3 3/5] clk: ast2600: Add full configs for I3C clocks Jeremy Kerr
@ 2023-02-13 13:24 ` Jeremy Kerr
2023-02-13 13:43 ` Krzysztof Kozlowski
2023-02-13 13:24 ` [PATCH v3 5/5] dt-bindings: clock: ast2600: Add reset config for I3C Jeremy Kerr
4 siblings, 1 reply; 9+ messages in thread
From: Jeremy Kerr @ 2023-02-13 13:24 UTC (permalink / raw
To: linux-aspeed, linux-clk
Cc: devicetree, Krzysztof Kozlowski, Michael Turquette, Rob Herring,
Stephen Boyd, Dylan Hung, Joel Stanley, Andrew Jeffery
The current ast2600 clock definitions include entries for i3c6 and i3c7
devices, which don't exist: there are no clock control lines documented
for these, and only i3c devices 0 through 5 are present.
So, remove the definitions for I3C6 and I3C7. Although this is a
potential ABI-breaking change, there are no in-tree users of these, and
any references would be broken anyway, as the hardware doesn't exist.
This is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7
from Aspeed's own tree, originally by Dylan Hung
<dylan_hung@aspeedtech.com>.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
---
v3:
- split dt-bindings and clk changes
v2:
- reword commit message
---
include/dt-bindings/clock/ast2600-clock.h | 2 --
1 file changed, 2 deletions(-)
diff --git a/include/dt-bindings/clock/ast2600-clock.h b/include/dt-bindings/clock/ast2600-clock.h
index 608ce576e63e..600549d7bee8 100644
--- a/include/dt-bindings/clock/ast2600-clock.h
+++ b/include/dt-bindings/clock/ast2600-clock.h
@@ -57,8 +57,6 @@
#define ASPEED_CLK_GATE_I3C3CLK 40
#define ASPEED_CLK_GATE_I3C4CLK 41
#define ASPEED_CLK_GATE_I3C5CLK 42
-#define ASPEED_CLK_GATE_I3C6CLK 43
-#define ASPEED_CLK_GATE_I3C7CLK 44
#define ASPEED_CLK_GATE_FSICLK 45
--
2.39.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v3 5/5] dt-bindings: clock: ast2600: Add reset config for I3C
2023-02-13 13:24 [PATCH v3 0/5] Add definitions for AST2600 i3c clocks and resets Jeremy Kerr
` (3 preceding siblings ...)
2023-02-13 13:24 ` [PATCH v3 4/5] dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions Jeremy Kerr
@ 2023-02-13 13:24 ` Jeremy Kerr
2023-02-13 13:44 ` Krzysztof Kozlowski
4 siblings, 1 reply; 9+ messages in thread
From: Jeremy Kerr @ 2023-02-13 13:24 UTC (permalink / raw
To: linux-aspeed, linux-clk
Cc: devicetree, Krzysztof Kozlowski, Michael Turquette, Rob Herring,
Stephen Boyd, Dylan Hung, Joel Stanley, Andrew Jeffery
Add reset line definitions for the AST2600 I3C block's reset inputs.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
---
v2:
- reword commit message
---
include/dt-bindings/clock/ast2600-clock.h | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/include/dt-bindings/clock/ast2600-clock.h b/include/dt-bindings/clock/ast2600-clock.h
index 600549d7bee8..16b7389bbb9c 100644
--- a/include/dt-bindings/clock/ast2600-clock.h
+++ b/include/dt-bindings/clock/ast2600-clock.h
@@ -90,6 +90,12 @@
/* Only list resets here that are not part of a gate */
#define ASPEED_RESET_ADC 55
#define ASPEED_RESET_JTAG_MASTER2 54
+#define ASPEED_RESET_I3C5 45
+#define ASPEED_RESET_I3C4 44
+#define ASPEED_RESET_I3C3 43
+#define ASPEED_RESET_I3C2 42
+#define ASPEED_RESET_I3C1 41
+#define ASPEED_RESET_I3C0 40
#define ASPEED_RESET_I3C_DMA 39
#define ASPEED_RESET_PWM 37
#define ASPEED_RESET_PECI 36
--
2.39.1
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH v3 2/5] dt-bindings: clock: ast2600: Add top-level I3C clock
2023-02-13 13:24 ` [PATCH v3 2/5] dt-bindings: clock: ast2600: Add top-level I3C clock Jeremy Kerr
@ 2023-02-13 13:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-13 13:42 UTC (permalink / raw
To: Jeremy Kerr, linux-aspeed, linux-clk
Cc: devicetree, Krzysztof Kozlowski, Michael Turquette, Rob Herring,
Stephen Boyd, Dylan Hung, Joel Stanley, Andrew Jeffery
On 13/02/2023 14:24, Jeremy Kerr wrote:
> The ast2600 hardware has a top-level clock for all i3c controller
> peripherals (then gated to each individual controller), so add a
> top-level i3c clock line to control this.
>
> This is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7
> from Aspeed's own tree, originally by Dylan Hung
> <dylan_hung@aspeedtech.com>.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 4/5] dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions
2023-02-13 13:24 ` [PATCH v3 4/5] dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions Jeremy Kerr
@ 2023-02-13 13:43 ` Krzysztof Kozlowski
0 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-13 13:43 UTC (permalink / raw
To: Jeremy Kerr, linux-aspeed, linux-clk
Cc: devicetree, Krzysztof Kozlowski, Michael Turquette, Rob Herring,
Stephen Boyd, Dylan Hung, Joel Stanley, Andrew Jeffery
On 13/02/2023 14:24, Jeremy Kerr wrote:
> The current ast2600 clock definitions include entries for i3c6 and i3c7
> devices, which don't exist: there are no clock control lines documented
> for these, and only i3c devices 0 through 5 are present.
>
> So, remove the definitions for I3C6 and I3C7. Although this is a
> potential ABI-breaking change, there are no in-tree users of these, and
> any references would be broken anyway, as the hardware doesn't exist.
>
> This is a partial cherry-pick and rework of ed44b8cdfdb and 1a35eb926d7
> from Aspeed's own tree, originally by Dylan Hung
> <dylan_hung@aspeedtech.com>.
>
> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH v3 5/5] dt-bindings: clock: ast2600: Add reset config for I3C
2023-02-13 13:24 ` [PATCH v3 5/5] dt-bindings: clock: ast2600: Add reset config for I3C Jeremy Kerr
@ 2023-02-13 13:44 ` Krzysztof Kozlowski
0 siblings, 0 replies; 9+ messages in thread
From: Krzysztof Kozlowski @ 2023-02-13 13:44 UTC (permalink / raw
To: Jeremy Kerr, linux-aspeed, linux-clk
Cc: devicetree, Krzysztof Kozlowski, Michael Turquette, Rob Herring,
Stephen Boyd, Dylan Hung, Joel Stanley, Andrew Jeffery
On 13/02/2023 14:24, Jeremy Kerr wrote:
> Add reset line definitions for the AST2600 I3C block's reset inputs.
>
> Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2023-02-13 13:44 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-02-13 13:24 [PATCH v3 0/5] Add definitions for AST2600 i3c clocks and resets Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 1/5] clk: ast2600: allow empty entries in aspeed_g6_gates Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 2/5] dt-bindings: clock: ast2600: Add top-level I3C clock Jeremy Kerr
2023-02-13 13:42 ` Krzysztof Kozlowski
2023-02-13 13:24 ` [PATCH v3 3/5] clk: ast2600: Add full configs for I3C clocks Jeremy Kerr
2023-02-13 13:24 ` [PATCH v3 4/5] dt-bindings: clock: ast2600: remove IC36 & I3C7 clock definitions Jeremy Kerr
2023-02-13 13:43 ` Krzysztof Kozlowski
2023-02-13 13:24 ` [PATCH v3 5/5] dt-bindings: clock: ast2600: Add reset config for I3C Jeremy Kerr
2023-02-13 13:44 ` Krzysztof Kozlowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.