From: Sergey Matyukevich <geomatsi@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2 00/28] sunxi: use mainline arm-trusted-firmware
Date: Thu, 10 Jun 2021 22:37:34 +0300 [thread overview]
Message-ID: <YMJp/rvETuvzWPSL@curiosity> (raw)
In-Reply-To: <20210610152205.451e1374@windsurf>
Hello Thomas,
> Thanks a lot for this work! See below some comments/doubts, though.
>
> On Wed, 9 Jun 2021 22:59:35 +0300
> Sergey Matyukevich <geomatsi@gmail.com> wrote:
>
> > Finally, let me re-iterate once again: I have only orangepi-zero-plus2
> > board at my disposal. So only this board has been tested. For all the
> > other boards only build tests have been completed. ATF provides only
> > basic support for H5/A64 and SCP firmware is disabled, so I do not
> > expect any surprises here. But still, any help with boot tests on
> > other H5/A64 sunxi boards is more than welcome.
>
> Then, I'm not sure of the approach. Indeed, the defconfigs are really
> meant to be configurations that have been tested on HW. If we start
> changing them without testing them on HW, their purpose kind of goes
> away. What is your plan here? Wait for the initial submitters to
> confirm that the change is OK and working on HW ? It might take a
> while. Or should we give up on that promise that all defconfigs have
> been tested on HW ?
I believe that promise should be kept. My plan is to wait for a while
and to collect feedback from the boards submitters/maintainers, if any.
In the meantime we can come to the decision on TF-A stack protection.
Then, final version of the patch set will include only tested boards.
Regards,
Sergey
next prev parent reply other threads:[~2021-06-10 19:37 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-09 19:59 [Buildroot] [PATCH v2 00/28] sunxi: use mainline arm-trusted-firmware Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 01/28] boot/arm-trusted-firmware: option to disable stack protection Sergey Matyukevich
2021-06-09 21:40 ` Thomas Petazzoni
2021-06-09 22:03 ` Sergey Matyukevich
2021-06-10 6:36 ` Heiko Thiery
2021-06-10 19:26 ` Sergey Matyukevich
2021-06-10 14:10 ` Thomas Petazzoni
2021-06-09 19:59 ` [Buildroot] [PATCH v2 02/28] support/testing: switch TestATFAllwinner to mainline ATF Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 03/28] support/testing/tests/boot/test_atf: update U-Boot in TestATFAllwinner Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 04/28] configs/orangepi_zero_plus2_defconfig: switch to mainline ATF Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 05/28] configs/bananapi_m64_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 06/28] configs/orangepi_zero_plus_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 07/28] configs/orangepi_pc2_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 08/28] configs/orangepi_prime_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 09/28] configs/orangepi_win_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 10/28] configs/friendlyarm_nanopi_a64_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 11/28] configs/friendlyarm_nanopi_neo2_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 12/28] configs/friendlyarm_nanopi_neo_plus2_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 13/28] configs/amarula_a64_relic_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 14/28] configs/olimex_a64_olinuxino_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 15/28] configs/pine64_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 16/28] configs/pine64_sopine_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 17/28] configs/orangepi-zero-plus2: bump BSP versions Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 18/28] configs/bananapi_m64_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 19/28] configs/orangepi_zero_plus_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 20/28] configs/orangepi_pc2_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 21/28] configs/orangepi_prime_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 22/28] configs/orangepi_win_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 23/28] configs/friendlyarm_nanopi_a64_defconfig: " Sergey Matyukevich
2021-06-09 19:59 ` [Buildroot] [PATCH v2 24/28] configs/friendlyarm_nanopi_neo2_defconfig: " Sergey Matyukevich
2021-06-09 20:00 ` [Buildroot] [PATCH v2 25/28] configs/friendlyarm_nanopi_neo_plus2_defconfig: " Sergey Matyukevich
2021-06-09 20:00 ` [Buildroot] [PATCH v2 26/28] configs/olimex_a64_olinuxino_defconfig: " Sergey Matyukevich
2021-06-09 20:00 ` [Buildroot] [PATCH v2 27/28] configs/pine64_defconfig: " Sergey Matyukevich
2021-06-09 20:00 ` [Buildroot] [PATCH v2 28/28] configs/pine64_sopine_defconfig: " Sergey Matyukevich
2021-06-10 13:22 ` [Buildroot] [PATCH v2 00/28] sunxi: use mainline arm-trusted-firmware Thomas Petazzoni
2021-06-10 19:37 ` Sergey Matyukevich [this message]
2021-06-24 21:25 ` Yann E. MORIN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YMJp/rvETuvzWPSL@curiosity \
--to=geomatsi@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.