From: Changhui Zhong <czhong@redhat.com>
To: linux-pci@vger.kernel.org
Subject: [bug report] WARNING: CPU: 0 PID: 226 at drivers/pci/pci.c:2236 pci_disable_device+0xf4/0x100
Date: Tue, 19 Mar 2024 15:34:56 +0800 [thread overview]
Message-ID: <CAGVVp+WyM-ce=c1L4p2EZfvLyxYZSHFkxKLad1TXXyNdVn1KYg@mail.gmail.com> (raw)
Hello,
repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
branch: master
commit HEAD:b3603fcb79b1036acae10602bffc4855a4b9af80
dmesg log:
Rebooting.
[ 292.644951] {1}[Hardware Error]: Hardware error from APEI Generic
Hardware Error Source: 5
[ 292.644955] {1}[Hardware Error]: event severity: fatal
[ 292.644958] {1}[Hardware Error]: Error 0, type: fatal
[ 292.644959] {1}[Hardware Error]: section_type: PCIe error
[ 292.644960] {1}[Hardware Error]: port_type: 0, PCIe end point
[ 292.644962] {1}[Hardware Error]: version: 3.0
[ 292.644963] {1}[Hardware Error]: command: 0x0002, status: 0x0010
[ 292.644964] {1}[Hardware Error]: device_id: 0000:01:00.1
[ 292.644966] {1}[Hardware Error]: slot: 0
[ 292.644967] {1}[Hardware Error]: secondary_bus: 0x00
[ 292.644968] {1}[Hardware Error]: vendor_id: 0x14e4, device_id: 0x165f
[ 292.644969] {1}[Hardware Error]: class_code: 020000
[ 292.644971] {1}[Hardware Error]: aer_uncor_status: 0x00100000,
aer_uncor_mask: 0x00010000
[ 292.644972] {1}[Hardware Error]: aer_uncor_severity: 0x000ef030
[ 292.644973] {1}[Hardware Error]: TLP Header: 40000001 0000020f
90028090 00000000
[ 292.644976] Kernel panic - not syncing: Fatal hardware error!
[ 292.644978] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.8.0+ #1
[ 292.644981] Hardware name: Dell Inc. PowerEdge R640/0X45NX, BIOS
2.19.1 06/04/2023
[ 292.644982] Call Trace:
[ 292.644984] <NMI>
[ 292.644985] panic+0x32b/0x350
[ 292.644995] __ghes_panic+0x69/0x70
[ 292.645000] ghes_in_nmi_queue_one_entry.constprop.0+0x1d9/0x2b0
[ 292.645005] ghes_notify_nmi+0x59/0xd0
[ 292.645007] nmi_handle+0x5b/0x150
[ 292.645014] default_do_nmi+0x40/0x100
[ 292.645017] exc_nmi+0x100/0x180
[ 292.645019] end_repeat_nmi+0xf/0x53
[ 292.645023] RIP: 0010:intel_idle+0x59/0xa0
[ 292.645028] Code: d2 48 89 d1 65 48 8b 05 55 21 73 70 0f 01 c8 48
8b 00 a8 08 75 14 66 90 0f 00 2d 2e 00 43 00 b9 01 00 00 00 48 89 f0
0f 01 c9 <65> 48 8b 05 2f 21 73 70 f0 80 60 02 df f0 83 44 24 fc 00 48
8b 00
[ 292.645030] RSP: 0018:ffffffff90403e48 EFLAGS: 00000046
[ 292.645032] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000001
[ 292.645034] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff93d22fa3ffa0
[ 292.645035] RBP: ffff93d22fa3ffa0 R08: 0000000000000002 R09: 00000000fffffffd
[ 292.645036] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff908bbf60
[ 292.645037] R13: ffffffff908bc048 R14: 0000000000000002 R15: 0000000000000000
[ 292.645040] ? intel_idle+0x59/0xa0
[ 292.645043] ? intel_idle+0x59/0xa0
[ 292.645046] </NMI>
[ 292.645046] <TASK>
[ 292.645047] cpuidle_enter_state+0x7d/0x410
[ 292.645050] cpuidle_enter+0x29/0x40
[ 292.645054] cpuidle_idle_call+0xf8/0x160
[ 292.645060] do_idle+0x7a/0xe0
[ 292.645062] cpu_startup_entry+0x25/0x30
[ 292.645065] rest_init+0xcc/0xd0
[ 292.645068] start_kernel+0x325/0x400
[ 292.645072] x86_64_start_reservations+0x14/0x30
[ 292.645076] x86_64_start_kernel+0xed/0xf0
[ 292.645079] common_startup_64+0x13e/0x141
[ 292.645084] </TASK>
[ 292.645101] Kernel Offset: 0xdc00000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)
# lspci -nn -s 01:00.1
01:00.1 Ethernet controller [0200]: Broadcom Inc. and subsidiaries
NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
# lspci -vvv -s 01:00.1
01:00.1 Ethernet controller: Broadcom Inc. and subsidiaries NetXtreme
BCM5720 Gigabit Ethernet PCIe
DeviceName: NIC4
Subsystem: Broadcom Inc. and subsidiaries Device 4160
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at 92900000 (64-bit, prefetchable) [size=64K]
Region 2: Memory at 92910000 (64-bit, prefetchable) [size=64K]
Region 4: Memory at 92920000 (64-bit, prefetchable) [size=64K]
Expansion ROM at 90040000 [disabled] [size=256K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Broadcom NetXtreme Gigabit Ethernet
Read-only fields:
[PN] Part number: BCM95720
[MN] Manufacture ID: 1028
[V0] Vendor specific: FFV22.61.8
[V1] Vendor specific: DSV1028VPDR.VER1.0
[V2] Vendor specific: NPY2
[V3] Vendor specific: PMT1
[V4] Vendor specific: NMVBroadcom Corp
[V5] Vendor specific: DTINIC
[V6] Vendor specific: DCM3001008d454101008d45
[RV] Reserved: checksum good, 233 byte(s) reserved
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [a0] MSI-X: Enable+ Count=17 Masked-
Vector table: BAR=4 offset=00000000
PBA: BAR=4 offset=00001000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
<4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+
FLReset+ SlotPowerLimit 25.000W
DevCtl: CorrErr- NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop- FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq-
AuxPwr+ TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x2, ASPM not supported
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s (ok), Width x2 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
NROPrPrP- LTR-
10BitTagComp- 10BitTagReq- OBFF Not
Supported, ExtFmt- EETLPPrefix-
EmergencyPowerReduction Not Supported,
EmergencyPowerReductionInit-
FRS- TPHComp- ExtTPHComp-
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 65ms to 210ms,
TimeoutDis- LTR- OBFF Disabled,
AtomicOpsCtl: ReqEn-
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete- EqualizationPhase1-
EqualizationPhase2- EqualizationPhase3-
LinkEqualizationRequest-
Retimer- 2Retimers- CrosslinkRes: unsupported
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt-
UnxCmplt+ RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO+ CmpltAbrt+
UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
CEMsk: RxErr- BadTLP+ BadDLLP+ Rollover+ Timeout+
AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap+
ECRCGenEn- ECRCChkCap+ ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 40000001 0000020f 90028090 00000000
Capabilities: [13c v1] Device Serial Number 00-00-e4-3d-1a-3c-8b-bb
Capabilities: [150 v1] Power Budgeting <?>
Capabilities: [160 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: tg3
Kernel modules: tg3
Thanks,
next reply other threads:[~2024-03-19 7:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-19 7:34 Changhui Zhong [this message]
2024-03-19 16:23 ` [bug report] WARNING: CPU: 0 PID: 226 at drivers/pci/pci.c:2236 pci_disable_device+0xf4/0x100 Bjorn Helgaas
2024-03-20 2:16 ` Changhui Zhong
2024-03-20 2:46 ` Bjorn Helgaas
2024-03-20 3:13 ` Changhui Zhong
2024-03-21 10:11 ` Changhui Zhong
2024-03-21 12:44 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAGVVp+WyM-ce=c1L4p2EZfvLyxYZSHFkxKLad1TXXyNdVn1KYg@mail.gmail.com' \
--to=czhong@redhat.com \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.