* [PATCH] usb: common: debug: Check non-standard control requests
@ 2022-07-28 1:38 Thinh Nguyen
0 siblings, 0 replies; only message in thread
From: Thinh Nguyen @ 2022-07-28 1:38 UTC (permalink / raw
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb
Previously usb_decode_ctrl() only decodes standard control requests, but
it was used for non-standard requests also. If it's non-standard or
unknown standard bRequest, print the Setup data values.
Fixes: af32423a2d86 ("usb: dwc3: trace: decode ctrl request")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
---
New patch from previous feedback:
https://lore.kernel.org/linux-usb/bf1e225b660d0bb68ccdb3ce1bd7bd2d33edb817.1648253632.git.Thinh.Nguyen@synopsys.com/
drivers/usb/common/debug.c | 96 +++++++++++++++++++++++++-------------
1 file changed, 64 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c
index 075f6b1b2a1a..f204cec8d380 100644
--- a/drivers/usb/common/debug.c
+++ b/drivers/usb/common/debug.c
@@ -208,30 +208,28 @@ static void usb_decode_set_isoch_delay(__u8 wValue, char *str, size_t size)
snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue);
}
-/**
- * usb_decode_ctrl - Returns human readable representation of control request.
- * @str: buffer to return a human-readable representation of control request.
- * This buffer should have about 200 bytes.
- * @size: size of str buffer.
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (CPU byte order)
- * @wIndex: matches the USB wIndex field (CPU byte order)
- * @wLength: matches the USB wLength field (CPU byte order)
- *
- * Function returns decoded, formatted and human-readable description of
- * control request packet.
- *
- * The usage scenario for this is for tracepoints, so function as a return
- * use the same value as in parameters. This approach allows to use this
- * function in TP_printk
- *
- * Important: wValue, wIndex, wLength parameters before invoking this function
- * should be processed by le16_to_cpu macro.
- */
-const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
- __u8 bRequest, __u16 wValue, __u16 wIndex,
- __u16 wLength)
+static void usb_decode_ctrl_generic(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
+{
+ u8 recip = bRequestType & USB_RECIP_MASK;
+ u8 type = bRequestType & USB_TYPE_MASK;
+
+ snprintf(str, size,
+ "Type=%s Recipient=%s Dir=%s bRequest=%u wValue=%u wIndex=%u wLength=%u",
+ (type == USB_TYPE_STANDARD) ? "Standard" :
+ (type == USB_TYPE_VENDOR) ? "Vendor" :
+ (type == USB_TYPE_CLASS) ? "Class" : "Unknown",
+ (recip == USB_RECIP_DEVICE) ? "Device" :
+ (recip == USB_RECIP_INTERFACE) ? "Interface" :
+ (recip == USB_RECIP_ENDPOINT) ? "Endpoint" : "Unknown",
+ (bRequestType & USB_DIR_IN) ? "IN" : "OUT",
+ bRequest, wValue, wIndex, wLength);
+}
+
+static void usb_decode_ctrl_standard(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
{
switch (bRequest) {
case USB_REQ_GET_STATUS:
@@ -272,14 +270,48 @@ const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
usb_decode_set_isoch_delay(wValue, str, size);
break;
default:
- snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x",
- bRequestType, bRequest,
- (u8)(cpu_to_le16(wValue) & 0xff),
- (u8)(cpu_to_le16(wValue) >> 8),
- (u8)(cpu_to_le16(wIndex) & 0xff),
- (u8)(cpu_to_le16(wIndex) >> 8),
- (u8)(cpu_to_le16(wLength) & 0xff),
- (u8)(cpu_to_le16(wLength) >> 8));
+ usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+ wValue, wIndex, wLength);
+ break;
+ }
+}
+
+/**
+ * usb_decode_ctrl - Returns human readable representation of control request.
+ * @str: buffer to return a human-readable representation of control request.
+ * This buffer should have about 200 bytes.
+ * @size: size of str buffer.
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (CPU byte order)
+ * @wIndex: matches the USB wIndex field (CPU byte order)
+ * @wLength: matches the USB wLength field (CPU byte order)
+ *
+ * Function returns decoded, formatted and human-readable description of
+ * control request packet.
+ *
+ * The usage scenario for this is for tracepoints, so function as a return
+ * use the same value as in parameters. This approach allows to use this
+ * function in TP_printk
+ *
+ * Important: wValue, wIndex, wLength parameters before invoking this function
+ * should be processed by le16_to_cpu macro.
+ */
+const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType,
+ __u8 bRequest, __u16 wValue, __u16 wIndex,
+ __u16 wLength)
+{
+ switch (bRequestType & USB_TYPE_MASK) {
+ case USB_TYPE_STANDARD:
+ usb_decode_ctrl_standard(str, size, bRequestType, bRequest,
+ wValue, wIndex, wLength);
+ break;
+ case USB_TYPE_VENDOR:
+ case USB_TYPE_CLASS:
+ default:
+ usb_decode_ctrl_generic(str, size, bRequestType, bRequest,
+ wValue, wIndex, wLength);
+ break;
}
return str;
base-commit: ed92f4353ef53e544db5311fd8efa0cd7fdc4e08
--
2.28.0
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2022-07-28 1:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-07-28 1:38 [PATCH] usb: common: debug: Check non-standard control requests Thinh Nguyen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.