* Re: bump
[not found] <H1YMm0UlsCAAuLjY3yG9iqSb0G4tRSHoe0_-bLXMowq8eNCd7eW5Vs_D_PdO4KnriiKO5e5fehpmXmQPtAR9htqHRT5MgFZumadSikTcNWw=@protonmail.com>
@ 2024-03-20 10:41 ` Arend van Spriel
2024-03-20 10:51 ` bump Arend van Spriel
2024-03-20 21:20 ` bump Hranislav Milenkovic
0 siblings, 2 replies; 5+ messages in thread
From: Arend van Spriel @ 2024-03-20 10:41 UTC (permalink / raw
To: Hranislav Milenkovic; +Cc: brcm80211, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 8463 bytes --]
On 3/7/2024 7:53 AM, Hranislav Milenkovic wrote:
> Hi Arend, couple years later same question... can these crashes be
> fixed... who maintains chipset firmware for 43602... I get it for
> brcmfmac but who maintains firmwares from here
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/ <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/>
Hi Hranislav,
The firmware repo is maintained by kernel.org. Regarding the firmwares
for the brcm chips these have been submitted by Broadcom. The 43602 is
EOL so there will be no regular releases. Can you provide hardware
configuration details for your platform.
The firmware repo has two firmware files for 43602:
-rw-r--r-- brcmfmac43602-pcie.ap.bin 595472
-rw-r--r-- brcmfmac43602-pcie.bin 635449
Which one are you using?
> I have some crashes if you are interested (also have you seen this
> bugreport
> https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432
> <https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432>)
You made me look. So are you using OpenWrt? What release/branch are you
using?
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.722477] ieee80211 phy0:
> brcmf_fw_crashed: Firmware has halted or crashed
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.729587] 0001:01:00.0:
> CONSOLE: 005280.898
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.734051] 0001:01:00.0:
> CONSOLE: FWID 01-f458629d
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.739004] 0001:01:00.0:
> CONSOLE: flags 110005
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.743562] 0001:01:00.0:
> CONSOLE: 005280.898
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.748079] 0001:01:00.0:
> CONSOLE: TRAP 7(26fea8): pc 1871d6, lr 1867e9, sp 26ff00, cpsr 800001df,
> spsr 800001bf
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.758362] 0001:01:00.0:
> CONSOLE: 005280.898 r0 1000000, r1 40000000, r2 40, r3 1, r4 1fc8d8,
> r5 26af20, r6 25f2d4
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.769074] 0001:01:00.0:
> CONSOLE: 005280.898 r7 25eab4, r8 25f2dc, r9 0, r10 bf3c0282, r11
> db1d6d6c, r12 6038120
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.779551] 0001:01:00.0:
> CONSOLE: 005280.898
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.784043] 0001:01:00.0:
> CONSOLE: sp+0 00000000 0026af20 00000000 0018861d
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.791385] 0001:01:00.0:
> CONSOLE: 005280.898 sp+10 00000000 0025f3c0 00000000 0018078c
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.799596] 0001:01:00.0:
> CONSOLE:
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.803114] 0001:01:00.0:
> CONSOLE: 005280.898 sp+c 0018861d
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.808743] 0001:01:00.0:
> CONSOLE: 005280.898 sp+2c 00006fc7
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.814441] 0001:01:00.0:
> CONSOLE: 005280.898 sp+30 00006f9d
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.820146] 0001:01:00.0:
> CONSOLE: 005280.899 sp+3c 00007005
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.825842] 0001:01:00.0:
> CONSOLE: 005280.899 sp+4c 00007243
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.831544] 0001:01:00.0:
> CONSOLE: 005280.899 sp+5c 00183825
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.837236] 0001:01:00.0:
> CONSOLE: 005280.899 sp+70 001837f9
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.842937] 0001:01:00.0:
> CONSOLE: 005280.899 sp+8c 001823d7
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.848640] 0001:01:00.0:
> CONSOLE: 005280.899 sp+98 000001df
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.854329] 0001:01:00.0:
> CONSOLE: 005280.899 sp+d8 000071df
> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.860032] 0001:01:00.0:
> CONSOLE: 005280.899 sp+e8 00188e59
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.797981] ieee80211 phy0:
> brcmf_fil_cmd_data: bus is down. we have nothing to do.
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.805670] brcmfmac:
> brcmf_cfg80211_stop_ap: bss_enable config failed -5
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.812497] ieee80211 phy0:
> brcmf_fil_cmd_data: bus is down. we have nothing to do.
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.820190] ieee80211 phy0:
> brcmf_cfg80211_stop_ap: SET SSID error (-5)
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.826827] ieee80211 phy0:
> brcmf_fil_cmd_data: bus is down. we have nothing to do.
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.834521] ieee80211 phy0:
> brcmf_fil_cmd_data: bus is down. we have nothing to do.
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.842213] brcmfmac:
> brcmf_cfg80211_stop_ap: wl apsta failed (-5)
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.848420] ieee80211 phy0:
> brcmf_fil_cmd_data: bus is down. we have nothing to do.
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.856098] ieee80211 phy0:
> brcmf_cfg80211_stop_ap: BRCMF_C_DOWN error -5
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.864446] br0: port
> 4(wlan0) entered disabled state
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.870425] device wlan0 left
> promiscuous mode
> Mar 05 19:13:22 178.220.177.32 kernel [ 5285.874923] br0: port
> 4(wlan0) entered disabled state
> Mar 05 19:13:22 178.220.177.32 kernel [ 5286.417713] brcmfmac:
> brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
> Mar 05 19:13:22 178.220.177.32 kernel [ 5286.428364] brcmfmac
> 0001:01:00.0: Direct firmware load for �H0^[�
> �\`\v�\x04`�dp^[�`0\v�y�\x03�H0^[�\`\v�\x04`�dp^[�`0\v�r�\x04 failed with error -2
Not sure why this is all garbled. Can image there is not file with that
name though ;-) Above seems the driver attempts to recover from the
firmware crash. I can take a look at the firmware crash and the recovery
mechanism in the driver.
> Mar 05 19:13:22 178.220.177.32 kernel [ 5286.441255] brcmfmac
> 0001:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt
> failed with error -2
> Mar 05 19:13:25 178.220.177.32 kernel [ 5289.150530] BUG: Bad page
> state in process modprobe pfn:07150
> Mar 05 19:13:25 178.220.177.32 kernel [ 5289.156407] page:86cb6f40
> count:-1 mapcount:0 mapping: (null) index:0x0
> Mar 05 19:13:25 178.220.177.32 kernel [ 5289.163118] flags: 0x0()
> Mar 05 19:13:25 178.220.177.32 kernel [ 5289.165660] page dumped
> because: nonzero _count
> Mar 06 05:20:56 178.220.177.32 kernel [41739.171893] 0002:03:00.0:
> CONSOLE: 041746.172 ucode revision 986.128
> Mar 06 05:20:56 178.220.177.32 kernel [41739.178467] 0002:03:00.0:
> CONSOLE: 041746.172 wl0: PSM microcode watchdog fired at 41733 (seconds)
> Mar 06 05:20:56 178.220.177.32 kernel [41739.187768] 0002:03:00.0:
> CONSOLE: 041746.172 wl0: psmdebug 0x00ec8111, phydebug 0x00000048,
> psm_brc 0x0501 psm_brc_1 0x0000maccontrol 0x84160403 ifsstat 0x00af
> m_cts_duration 0x0000 m_ucode_dbgst 0x0002
> Mar 06 05:20:56 178.220.177.32 kernel [41739.206038] 0002:03:00.0:
> CONSOLE: 041746.172 wepctl 0x0050 wepstat 0x0000 wep_hdrloc 0x001e
> wep_psdulen 281
> Mar 06 05:20:56 178.220.177.32 kernel [41739.216025] 0002:03:00.0:
> CONSOLE: 041746.172 RXE_RXCNT: 0x011f DAGG: ctl: 0x0000, bleft:
> 0x0096
> Mar 06 05:20:56 178.220.177.32 kernel [41739.225523] 0002:03:00.0:
> CONSOLE: offs: 0x000c, stat: 0x1056, len: 0x0000
> Mar 06 05:20:56 178.220.177.32 kernel [41739.232995] 0002:03:00.0:
> CONSOLE: 041746.172 M_RXFRM_BLK scr(0:63) btc_params(0:63) phydebug PC
> ampdu clk off
> Mar 06 05:20:56 178.220.177.32 kernel [41739.243076] 0002:03:00.0:
> CONSOLE: 041746.172 wlc_dump_aggfifo:
> Mar 06 05:20:56 178.220.177.32 kernel [41739.249089] 0002:03:00.0:
> CONSOLE: 041746.172 framerdy 0x0 bmccmd 7 framecnt 1024
> Mar 06 05:20:56 178.220.177.32 kernel [41739.256822] 0002:03:00.0:
> CONSOLE: 041746.172 AQM agg params 0xfc0 maxlen hi/lo 0x0 0xffff minlen
> 0x0 adjlen 0x0
> Mar 06 05:20:56 178.220.177.32 kernel [41739.267153] 0002:03:00.0:
> CONSOLE: 041746.172 AQM agg results 0x8001 len hi/lo: 0x0 0x22
> BAbitmap(0-3) 0 0 0 0
> Mar 06 05:20:56 178.220.177.32 kernel [41739.277244] ieee80211 phy1:
> brcmf_psm_watchdog_notify: PSM's watchdog has fired!
The PSM watchdog means the microcode got stuck in a bad state. Getting
microcode development involved in fixing this will prove difficult.
Regards,
Arend
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4219 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: bump
2024-03-20 10:41 ` bump Arend van Spriel
@ 2024-03-20 10:51 ` Arend van Spriel
2024-03-20 21:20 ` bump Hranislav Milenkovic
1 sibling, 0 replies; 5+ messages in thread
From: Arend van Spriel @ 2024-03-20 10:51 UTC (permalink / raw
To: Hranislav Milenkovic; +Cc: brcm80211, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 2337 bytes --]
On 3/20/2024 11:41 AM, Arend van Spriel wrote:
> On 3/7/2024 7:53 AM, Hranislav Milenkovic wrote:
>> Hi Arend, couple years later same question... can these crashes be
>> fixed... who maintains chipset firmware for 43602... I get it for
>> brcmfmac but who maintains firmwares from here
>> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/ <https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/>
>
> Hi Hranislav,
>
> The firmware repo is maintained by kernel.org. Regarding the firmwares
> for the brcm chips these have been submitted by Broadcom. The 43602 is
> EOL so there will be no regular releases. Can you provide hardware
> configuration details for your platform.
>
> The firmware repo has two firmware files for 43602:
>
> -rw-r--r-- brcmfmac43602-pcie.ap.bin 595472
> -rw-r--r-- brcmfmac43602-pcie.bin 635449
>
> Which one are you using?
>
>> I have some crashes if you are interested (also have you seen this
>> bugreport
>> https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432 <https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432>)
>
> You made me look. So are you using OpenWrt? What release/branch are you
> using?
>
>> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.722477] ieee80211 phy0:
>> brcmf_fw_crashed: Firmware has halted or crashed
>> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.729587] 0001:01:00.0:
>> CONSOLE: 005280.898
>> Mar 05 19:13:21 178.220.177.32 kernel [ 5284.734051] 0001:01:00.0:
>> CONSOLE: FWID 01-f458629d
This FWID is not matching the firmware files in linux-firmware repo:
$ for f in brcmfmac43602-pcie.*; do strings $f | tail -1; done
43602a1-roml/pcie-ag-splitrx-fdap-mbss-mfp-wl11k-wl11u-txbf-pktctx-amsdutx-ampduretry-chkd2hdma-proptxstatus-11nprop
Version: 7.35.177.56 CRC: 548eccd4 Date: Fri 2015-09-18 03:31:06 PDT
Ucode Ver: 986.122 FWID: 01-6cb8e269
43602a1-roml/pcie-ag-pktctx-splitrx-amsdutx-txbf-p2p-mchan-idauth-idsup-tdls-mfp-sr-proptxstatus-pktfilter-wowlpf-ampduhostreorder-keepalive-srom12-chkd2hdma
Version: 7.35.177.61 CRC: 55b10cfe Date: Tue 2015-11-10 06:39:55 PST
Ucode Ver: 986.122 FWID: 01-ea662a8c
Can you provide the above details for the firmware file you are using?
Regards,
Arend
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4219 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: bump
2024-03-20 10:41 ` bump Arend van Spriel
2024-03-20 10:51 ` bump Arend van Spriel
@ 2024-03-20 21:20 ` Hranislav Milenkovic
2024-03-23 19:40 ` bump Arend van Spriel
1 sibling, 1 reply; 5+ messages in thread
From: Hranislav Milenkovic @ 2024-03-20 21:20 UTC (permalink / raw
To: Arend van Spriel, Sebastian Gottschall; +Cc: brcm80211, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 9685 bytes --]
Hi Arend, thank you for responding to my mail.
To answer you, I use both ddwrt and openwrt even. Both of them have problems with this chipset.
1) Openwrt stalls sometimes described here https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432 has problem with weak siignal on 5 ghz and doesn't show signal level because of BRCMF_FEAT_DUMP_OBSS is disabled described here https://github.com/openwrt/openwrt/issues/13903
2) ddwrt (brcmfamc version) has great signal strenght, shows signal levels but crashes all the time and basic functions like su-beamformee doesn't work with 43602
I attached as many info as I could get like hostapd.conf, dmesg, build versions/branch but commad you asked for f in brcmfmac43602-pcie.*; do strings $f | tail -1; output nothing both on openwrt and ddwrt...
Hranislav Milenkovic
+381 (0)65 2026199
Sent with Proton Mail secure email.
On Wednesday, March 20th, 2024 at 11:41 AM, Arend van Spriel <arend.vanspriel@broadcom.com> wrote:
> On 3/7/2024 7:53 AM, Hranislav Milenkovic wrote:
>
> > Hi Arend, couple years later same question... can these crashes be
> > fixed... who maintains chipset firmware for 43602... I get it for
> > brcmfmac but who maintains firmwares from here
> > https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/ https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/
>
>
> Hi Hranislav,
>
> The firmware repo is maintained by kernel.org. Regarding the firmwares
> for the brcm chips these have been submitted by Broadcom. The 43602 is
> EOL so there will be no regular releases. Can you provide hardware
> configuration details for your platform.
>
> The firmware repo has two firmware files for 43602:
>
> -rw-r--r-- brcmfmac43602-pcie.ap.bin 595472
> -rw-r--r-- brcmfmac43602-pcie.bin 635449
>
> Which one are you using?
>
> > I have some crashes if you are interested (also have you seen this
> > bugreport
> > https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432
> > https://github.com/openwrt/openwrt/issues/14685#issuecomment-1980108432)
>
>
> You made me look. So are you using OpenWrt? What release/branch are you
> using?
>
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.722477] ieee80211 phy0:
> > brcmf_fw_crashed: Firmware has halted or crashed
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.729587] 0001:01:00.0:
> > CONSOLE: 005280.898
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.734051] 0001:01:00.0:
> > CONSOLE: FWID 01-f458629d
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.739004] 0001:01:00.0:
> > CONSOLE: flags 110005
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.743562] 0001:01:00.0:
> > CONSOLE: 005280.898
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.748079] 0001:01:00.0:
> > CONSOLE: TRAP 7(26fea8): pc 1871d6, lr 1867e9, sp 26ff00, cpsr 800001df,
> > spsr 800001bf
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.758362] 0001:01:00.0:
> > CONSOLE: 005280.898 r0 1000000, r1 40000000, r2 40, r3 1, r4 1fc8d8,
> > r5 26af20, r6 25f2d4
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.769074] 0001:01:00.0:
> > CONSOLE: 005280.898 r7 25eab4, r8 25f2dc, r9 0, r10 bf3c0282, r11
> > db1d6d6c, r12 6038120
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.779551] 0001:01:00.0:
> > CONSOLE: 005280.898
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.784043] 0001:01:00.0:
> > CONSOLE: sp+0 00000000 0026af20 00000000 0018861d
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.791385] 0001:01:00.0:
> > CONSOLE: 005280.898 sp+10 00000000 0025f3c0 00000000 0018078c
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.799596] 0001:01:00.0:
> > CONSOLE:
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.803114] 0001:01:00.0:
> > CONSOLE: 005280.898 sp+c 0018861d
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.808743] 0001:01:00.0:
> > CONSOLE: 005280.898 sp+2c 00006fc7
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.814441] 0001:01:00.0:
> > CONSOLE: 005280.898 sp+30 00006f9d
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.820146] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+3c 00007005
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.825842] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+4c 00007243
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.831544] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+5c 00183825
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.837236] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+70 001837f9
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.842937] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+8c 001823d7
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.848640] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+98 000001df
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.854329] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+d8 000071df
> > Mar 05 19:13:21 178.220.177.32 kernel [ 5284.860032] 0001:01:00.0:
> > CONSOLE: 005280.899 sp+e8 00188e59
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.797981] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.805670] brcmfmac:
> > brcmf_cfg80211_stop_ap: bss_enable config failed -5
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.812497] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.820190] ieee80211 phy0:
> > brcmf_cfg80211_stop_ap: SET SSID error (-5)
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.826827] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.834521] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.842213] brcmfmac:
> > brcmf_cfg80211_stop_ap: wl apsta failed (-5)
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.848420] ieee80211 phy0:
> > brcmf_fil_cmd_data: bus is down. we have nothing to do.
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.856098] ieee80211 phy0:
> > brcmf_cfg80211_stop_ap: BRCMF_C_DOWN error -5
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.864446] br0: port
> > 4(wlan0) entered disabled state
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.870425] device wlan0 left
> > promiscuous mode
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5285.874923] br0: port
> > 4(wlan0) entered disabled state
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5286.417713] brcmfmac:
> > brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5286.428364] brcmfmac
> > 0001:01:00.0: Direct firmware load for �H0^[�
> > �\\v`�\x04`�dp^[�`0\v�y�\x03�H0^[�\\`\v�\x04`�dp^[�`0\v�r�\x04 failed with error -2
>
>
> Not sure why this is all garbled. Can image there is not file with that
> name though ;-) Above seems the driver attempts to recover from the
> firmware crash. I can take a look at the firmware crash and the recovery
> mechanism in the driver.
>
> > Mar 05 19:13:22 178.220.177.32 kernel [ 5286.441255] brcmfmac
> > 0001:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt
> > failed with error -2
> > Mar 05 19:13:25 178.220.177.32 kernel [ 5289.150530] BUG: Bad page
> > state in process modprobe pfn:07150
> > Mar 05 19:13:25 178.220.177.32 kernel [ 5289.156407] page:86cb6f40
> > count:-1 mapcount:0 mapping: (null) index:0x0
> > Mar 05 19:13:25 178.220.177.32 kernel [ 5289.163118] flags: 0x0()
> > Mar 05 19:13:25 178.220.177.32 kernel [ 5289.165660] page dumped
> > because: nonzero _count
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.171893] 0002:03:00.0:
> > CONSOLE: 041746.172 ucode revision 986.128
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.178467] 0002:03:00.0:
> > CONSOLE: 041746.172 wl0: PSM microcode watchdog fired at 41733 (seconds)
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.187768] 0002:03:00.0:
> > CONSOLE: 041746.172 wl0: psmdebug 0x00ec8111, phydebug 0x00000048,
> > psm_brc 0x0501 psm_brc_1 0x0000maccontrol 0x84160403 ifsstat 0x00af
> > m_cts_duration 0x0000 m_ucode_dbgst 0x0002
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.206038] 0002:03:00.0:
> > CONSOLE: 041746.172 wepctl 0x0050 wepstat 0x0000 wep_hdrloc 0x001e
> > wep_psdulen 281
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.216025] 0002:03:00.0:
> > CONSOLE: 041746.172 RXE_RXCNT: 0x011f DAGG: ctl: 0x0000, bleft:
> > 0x0096
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.225523] 0002:03:00.0:
> > CONSOLE: offs: 0x000c, stat: 0x1056, len: 0x0000
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.232995] 0002:03:00.0:
> > CONSOLE: 041746.172 M_RXFRM_BLK scr(0:63) btc_params(0:63) phydebug PC
> > ampdu clk off
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.243076] 0002:03:00.0:
> > CONSOLE: 041746.172 wlc_dump_aggfifo:
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.249089] 0002:03:00.0:
> > CONSOLE: 041746.172 framerdy 0x0 bmccmd 7 framecnt 1024
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.256822] 0002:03:00.0:
> > CONSOLE: 041746.172 AQM agg params 0xfc0 maxlen hi/lo 0x0 0xffff minlen
> > 0x0 adjlen 0x0
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.267153] 0002:03:00.0:
> > CONSOLE: 041746.172 AQM agg results 0x8001 len hi/lo: 0x0 0x22
> > BAbitmap(0-3) 0 0 0 0
> > Mar 06 05:20:56 178.220.177.32 kernel [41739.277244] ieee80211 phy1:
> > brcmf_psm_watchdog_notify: PSM's watchdog has fired!
>
>
> The PSM watchdog means the microcode got stuck in a bad state. Getting
> microcode development involved in fixing this will prove difficult.
>
> Regards,
> Arend
[-- Attachment #2: Openwrt.snapshot.r25589.txt --]
[-- Type: text/plain, Size: 41181 bytes --]
[hranislav@toshiba-laptop ~]$ sudo ssh 192.168.1.1
[sudo] password for hranislav:
root@192.168.1.1's password:
BusyBox v1.36.1 (2024-03-16 23:19:22 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r25589-f84ed09d2c
-----------------------------------------------------
root@R8000:~# for f in brcmfmac43602-pcie.*; do strings $f | tail -1;
>
JUST BLANK SCREEN NO NOTHING NO MICROCODE VERSION
root@R8000:~# cat /tmp/run/hostapd-phy1.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=US
ieee80211d=1
hw_mode=g
supported_rates=60 90 120 180 240 360 480 540
basic_rates=60 120 240
beacon_int=100
channel=6
chanlist=6
#num_global_macaddr=1
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][SHORT-GI-20][DSSS_CCK-40]
interface=phy1-ap0
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
skip_inactivity_poll=0
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
utf8_ssid=1
multi_ap=0
wpa_passphrase=mojabeti12
wpa_psk_file=/var/run/hostapd-phy1-ap0.psk
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Marko&Pavle
bridge=br-lan
wds_bridge=
snoop_iface=br-lan
wpa_disable_eapol_key_retries=0
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
dynamic_vlan=0
vlan_naming=1
vlan_no_bridge=1
vlan_file=/var/run/hostapd-phy1-ap0.vlan
qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
bssid=2c:30:33:59:aa:68
#default_macaddr
root@R8000:~# cat /tmp/run/hostapd-phy0.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=US
ieee80211d=1
ieee80211h=1
hw_mode=a
beacon_int=100
channel=149
chanlist=149
tx_queue_data2_burst=2.0
#num_global_macaddr=1
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
ieee80211ac=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=155
vht_capab=[SHORT-GI-80][SU-BEAMFORMER][SU-BEAMFORMEE][SOUNDING-DIMENSION-3][BF-ANTENNA-3][MAX-A-MPDU-LEN-EXP0][VHT-LINK-ADAPT-3]
interface=phy0-ap0
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
skip_inactivity_poll=0
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
utf8_ssid=1
multi_ap=0
wpa_passphrase=mojabeti12
wpa_psk_file=/var/run/hostapd-phy0-ap0.psk
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Marko&Pavle
bridge=br-lan
wds_bridge=
snoop_iface=br-lan
wpa_disable_eapol_key_retries=0
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
dynamic_vlan=0
vlan_naming=1
vlan_no_bridge=1
vlan_file=/var/run/hostapd-phy0-ap0.vlan
qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
bssid=2c:30:33:59:aa:57
#default_macaddr
root@R8000:~# cat /tmp/run/hostapd-phy0.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=US
ieee80211d=1
ieee80211h=1
hw_mode=a
beacon_int=100
channel=149
chanlist=149
tx_queue_data2_burst=2.0
#num_global_macaddr=1
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
ieee80211ac=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=155
vht_capab=[SHORT-GI-80][SU-BEAMFORMER][SU-BEAMFORMEE][SOUNDING-DIMENSION-3][BF-ANTENNA-3][MAX-A-MPDU-LEN-EXP0][VHT-LINK-ADAPT-3]
interface=phy0-ap0
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
skip_inactivity_poll=0
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
utf8_ssid=1
multi_ap=0
wpa_passphrase=mojabeti12
wpa_psk_file=/var/run/hostapd-phy0-ap0.psk
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Marko&Pavle
bridge=br-lan
wds_bridge=
snoop_iface=br-lan
wpa_disable_eapol_key_retries=0
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
dynamic_vlan=0
vlan_naming=1
vlan_no_bridge=1
vlan_file=/var/run/hostapd-phy0-ap0.vlan
qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
bssid=2c:30:33:59:aa:57
#default_macaddr
root@R8000:~# cat /tmp/run/hostapd-phy2.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=US
ieee80211d=1
ieee80211h=1
hw_mode=a
beacon_int=100
channel=44
chanlist=44
tx_queue_data2_burst=2.0
#num_global_macaddr=1
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
ieee80211ac=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42
vht_capab=[SHORT-GI-80][SU-BEAMFORMER][SU-BEAMFORMEE][SOUNDING-DIMENSION-3][BF-ANTENNA-3][MAX-A-MPDU-LEN-EXP0][VHT-LINK-ADAPT-3]
interface=phy2-ap0
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
skip_inactivity_poll=0
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
utf8_ssid=1
multi_ap=0
wpa_passphrase=mojabeti12
wpa_psk_file=/var/run/hostapd-phy2-ap0.psk
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=Marko&Pavle
bridge=br-lan
wds_bridge=
snoop_iface=br-lan
wpa_disable_eapol_key_retries=0
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
dynamic_vlan=0
vlan_naming=1
vlan_no_bridge=1
vlan_file=/var/run/hostapd-phy2-ap0.vlan
qos_map_set=0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56
bssid=2c:30:33:59:aa:79
#default_macaddr
root@R8000:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.15.150 (builder@buildhost) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 12.3.0 r25589-f84ed09d2c) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Mar 19 06:20:26 2024
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Netgear R8000 (BCM4709)
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] HighMem [mem 0x0000000008000000-0x000000008fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
[ 0.000000] node 0: [mem 0x0000000088000000-0x000000008fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000008fffffff]
[ 0.000000] percpu: Embedded 11 pages/cpu s16140 r8192 d20724 u45056
[ 0.000000] pcpu-alloc: s16140 r8192 d20724 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 65248
[ 0.000000] Kernel command line: console=ttyS0,115200
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 249464K/262144K available (6488K kernel code, 570K rwdata, 1480K rodata, 1024K init, 299K bss, 12680K reserved, 0K cma-reserved, 131072K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x0a130000 -> 0x3a530000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 256 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x7e530001
[ 0.000002] sched_clock: 64 bits at 500MHz, resolution 2ns, wraps every 4398046511103ns
[ 0.000026] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[ 0.000052] Switching to timer-based delay loop, resolution 2ns
[ 0.000333] Calibrating delay loop (skipped), value calculated using timer frequency.. 1000.00 BogoMIPS (lpj=5000000)
[ 0.000350] CPU: Testing write buffer coherency: ok
[ 0.000379] CPU0: Spectre v2: using BPIALL workaround
[ 0.000388] pid_max: default: 32768 minimum: 301
[ 0.000926] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.000941] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.002283] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003017] Setting up static identity map for 0x100000 - 0x10003c
[ 0.003171] rcu: Hierarchical SRCU implementation.
[ 0.003493] smp: Bringing up secondary CPUs ...
[ 0.004108] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.004123] CPU1: Spectre v2: using BPIALL workaround
[ 0.004226] smp: Brought up 1 node, 2 CPUs
[ 0.004240] SMP: Total of 2 processors activated (2000.00 BogoMIPS).
[ 0.004250] CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x13)
[ 0.004256] CPU: This may indicate a broken bootloader or firmware.
[ 0.007249] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.007279] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.007506] pinctrl core: initialized pinctrl subsystem
[ 0.008281] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.008897] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.009592] thermal_sys: Registered thermal governor 'step_wise'
[ 0.020393] clocksource: Switched to clocksource arm_global_timer
[ 0.021373] NET: Registered PF_INET protocol family
[ 0.021516] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.022022] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.022056] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.022071] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.022090] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[ 0.022113] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.022200] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.022236] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[ 0.022445] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.022484] PCI: CLS 0 bytes, default 64
[ 0.023385] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[ 0.026922] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.026945] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.027810] bounce: pool size: 64 pages
[ 0.027903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.030267] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.032267] printk: console [ttyS0] disabled
[ 0.032355] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 28, base_baud = 7812500) is a 16550
[ 0.555170] printk: console [ttyS0] enabled
[ 0.560350] bcm2835-rng 18004000.rng: hwrng registered
[ 0.691683] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 0.698072] nand: AMD/Spansion S34ML01G2
[ 0.702025] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.709637] iproc_nand 18028000.nand-controller: detected 128MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, BCH-8
[ 0.720597] Scanning device for bad blocks
[ 0.962719] random: crng init done
[ 2.786066] 4 bcm47xxpart partitions found on MTD device brcmnand.0
[ 2.792379] Creating 4 MTD partitions on "brcmnand.0":
[ 2.797533] 0x000000000000-0x000000080000 : "boot"
[ 2.803048] 0x000000080000-0x000000200000 : "nvram"
[ 2.808601] 0x000000200000-0x000002600000 : "firmware"
[ 2.815209] 2 trx partitions found on MTD device firmware
[ 2.820661] Creating 2 MTD partitions on "firmware":
[ 2.825646] 0x00000000001c-0x000000400000 : "linux"
[ 2.830545] mtd: partition "linux" doesn't start on an erase/write block boundary -- force read-only
[ 2.840345] 0x000000400000-0x000002400000 : "ubi"
[ 2.845879] 0x000002600000-0x000008000000 : "board_data"
[ 2.853949] bcm_iproc 18029200.spi: using bspi-mspi mode
[ 2.861520] iproc-mdio 18003000.mdio: Broadcom iProc MDIO bus registered
[ 2.869524] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
[ 2.877683] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
[ 2.883937] bcma-host-soc 18000000.axi: bus0: Found chip with id 53010, rev 0x00 and package 0x00
[ 2.892962] bcma-host-soc 18000000.axi: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2A, class 0x0)
[ 2.903588] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 2.903601] bcma-host-soc 18000000.axi: bus0: Core 1 found: Chipcommon B (manuf 0x4BF, id 0x50B, rev 0x01, class 0x0)
[ 2.914370] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 2.914380] bcma-host-soc 18000000.axi: bus0: Core 2 found: DMA (manuf 0x4BF, id 0x502, rev 0x01, class 0x0)
[ 2.924399] bcma-host-soc 18000000.axi: bus0: Core 3 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 2.934858] bcma-host-soc 18000000.axi: bus0: Core 4 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 2.945312] bcma-host-soc 18000000.axi: bus0: Core 5 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 2.955766] bcma-host-soc 18000000.axi: bus0: Core 6 found: GBit MAC (manuf 0x4BF, id 0x82D, rev 0x05, class 0x0)
[ 2.966158] bcma-host-soc 18000000.axi: bus0: Core 7 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 2.976725] bcma-host-soc 18000000.axi: bus0: Core 8 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 2.987303] bcma-host-soc 18000000.axi: bus0: Core 9 found: PCIe Gen 2 (manuf 0x4BF, id 0x501, rev 0x01, class 0x0)
[ 2.997907] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 2.997917] bcma-host-soc 18000000.axi: bus0: Core 10 found: ARM Cortex A9 core (ihost) (manuf 0x4BF, id 0x510, rev 0x01, class 0x0)
[ 3.009979] bcma-host-soc 18000000.axi: bus0: Core 11 found: USB 2.0 (manuf 0x4BF, id 0x504, rev 0x01, class 0x0)
[ 3.020409] bcma-host-soc 18000000.axi: bus0: Core 12 found: USB 3.0 (manuf 0x4BF, id 0x505, rev 0x01, class 0x0)
[ 3.030829] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.030838] bcma-host-soc 18000000.axi: bus0: Core 13 found: SDIO3 (manuf 0x4BF, id 0x503, rev 0x01, class 0x0)
[ 3.041081] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.041092] bcma-host-soc 18000000.axi: bus0: Core 14 found: I2S (manuf 0x4BF, id 0x834, rev 0x03, class 0x0)
[ 3.051158] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.051168] bcma-host-soc 18000000.axi: bus0: Core 15 found: ARM Cortex A9 JTAG (manuf 0x4BF, id 0x506, rev 0x01, class 0x0)
[ 3.062553] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.062563] bcma-host-soc 18000000.axi: bus0: Core 16 found: Denali DDR2/DDR3 memory controller (manuf 0x4BF, id 0x507, rev 0x01, class 0x0)
[ 3.075331] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.075341] bcma-host-soc 18000000.axi: bus0: Core 17 found: ROM (manuf 0x4BF, id 0x508, rev 0x01, class 0x0)
[ 3.085442] bcma-host-soc 18000000.axi: bus0: Core 18 found: NAND flash controller (manuf 0x4BF, id 0x509, rev 0x01, class 0x0)
[ 3.097083] bcma-host-soc 18000000.axi: bus0: bcma_of_get_irq() failed with rc=-22
[ 3.097093] bcma-host-soc 18000000.axi: bus0: Core 19 found: SPI flash controller (manuf 0x4BF, id 0x50A, rev 0x01, class 0x0)
[ 3.108558] bcma-host-soc 18000000.axi: bus0: Flash type not supported
[ 3.133153] bcma-host-soc 18000000.axi: bus0: Using SPROM revision 11 provided by platform.
[ 3.133451] bgmac_bcma bcma0:3: Found PHY addr: 30 (NOREGS)
[ 3.139061] bgmac_bcma bcma0:3: Support for Roboswitch not implemented
[ 3.145645] bgmac_bcma bcma0:3: Invalid MAC addr: 00:00:00:00:00:00
[ 3.151953] bgmac_bcma bcma0:3: Using random MAC: 5a:e3:cf:c9:18:6f
[ 3.159448] b53-srab-switch b53-srab-switch: invalid resource
[ 3.165264] b53-srab-switch: probe of b53-srab-switch failed with error -22
[ 3.172963] bgmac_bcma bcma0:4: Found PHY addr: 30 (NOREGS)
[ 3.178577] bgmac_bcma bcma0:4: Support for Roboswitch not implemented
[ 3.185142] bgmac_bcma bcma0:4: Invalid MAC addr: 00:00:00:00:00:00
[ 3.191440] bgmac_bcma bcma0:4: Using random MAC: 1e:67:d7:31:23:42
[ 3.199502] bgmac_bcma bcma0:5: Found PHY addr: 30 (NOREGS)
[ 3.205157] bgmac_bcma bcma0:5: Support for Roboswitch not implemented
[ 3.213548] bgmac_bcma bcma0:6: Unsupported core_unit 3
[ 3.218814] bgmac_bcma: probe of bcma0:6 failed with error -524
[ 3.224939] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
[ 3.232493] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
[ 3.242124] OF: /axi@18000000/pcie@12000: Missing device_type
[ 3.247893] pcie_iproc_bcma bcma0:7: non-prefetchable memory resource required
[ 3.370381] pcie_iproc_bcma bcma0:7: link: UP
[ 3.374880] pcie_iproc_bcma bcma0:7: PCI host bridge to bus 0000:00
[ 3.381199] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 3.386712] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fffffff]
[ 3.393641] pci 0000:00:00.0: [14e4:8012] type 01 class 0x060400
[ 3.399673] pci_bus 0000:00: 2-byte config write to 0000:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.409415] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 3.416604] PCI: bus0: Fast back to back transfers disabled
[ 3.422216] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.430418] pci 0000:01:00.0: [14e4:aa52] type 00 class 0x028000
[ 3.436460] pci_bus 0000:01: 2-byte config write to 0000:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.446168] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 3.453000] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 3.459909] pci 0000:01:00.0: supports D1 D2
[ 3.465232] PCI: bus1: Fast back to back transfers disabled
[ 3.470846] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 3.477505] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x085fffff]
[ 3.484331] pci 0000:01:00.0: BAR 2: assigned [mem 0x08000000-0x083fffff 64bit]
[ 3.491687] pci 0000:01:00.0: BAR 0: assigned [mem 0x08400000-0x08407fff 64bit]
[ 3.499028] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 3.504015] pci 0000:00:00.0: bridge window [mem 0x08000000-0x085fffff]
[ 3.510880] pci 0000:00:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[ 3.519243] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
[ 3.526777] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
[ 3.536402] pcie_iproc_bcma bcma0:8: non-prefetchable memory resource required
[ 3.670377] pcie_iproc_bcma bcma0:8: link: UP
[ 3.674868] pcie_iproc_bcma bcma0:8: PCI host bridge to bus 0001:00
[ 3.681181] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 3.686687] pci_bus 0001:00: root bus resource [mem 0x40000000-0x47ffffff]
[ 3.693616] pci 0001:00:00.0: [14e4:8012] type 01 class 0x060400
[ 3.699647] pci_bus 0001:00: 2-byte config write to 0001:00:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.709380] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 3.716556] PCI: bus0: Fast back to back transfers disabled
[ 3.722172] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.730403] pci 0001:01:00.0: [10b5:8603] type 01 class 0x060400
[ 3.736443] pci_bus 0001:01: 2-byte config write to 0001:01:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.746151] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff]
[ 3.752584] pci 0001:01:00.0: supports D1 D2
[ 3.756866] pci 0001:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.764568] PCI: bus1: Fast back to back transfers disabled
[ 3.770170] pci 0001:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 3.778396] pci 0001:02:00.0: [0000:0012] type 12 class 0x001200
[ 3.784449] pci_bus 0001:02: 2-byte config write to 0001:02:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 3.794154] pci 0001:02:00.0: unknown header type 12, ignoring device
[ 3.800727] pci 0001:02:01.0: [10b5:8603] type 01 class 0x060400
[ 3.806905] pci 0001:02:01.0: supports D1 D2
[ 3.811199] pci 0001:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.818133] pci 0001:02:02.0: [10b5:8603] type 01 class 0x060400
[ 3.824331] pci 0001:02:02.0: supports D1 D2
[ 3.828622] pci 0001:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 3.835564] pci 0001:02:03.0: [0008:0000] type 00 class 0x000000
[ 3.841922] pci 0001:02:04.0: [0008:0000] type 00 class 0x000000
[ 3.848247] pci 0001:02:05.0: [0008:0000] type 00 class 0x000000
[ 3.854617] pci 0001:02:06.0: [0008:0000] type 00 class 0x000000
[ 3.860976] pci 0001:02:07.0: [0008:0000] type 00 class 0x000000
[ 3.867315] pci 0001:02:08.0: [0008:0000] type 00 class 0x000000
[ 3.873663] pci 0001:02:09.0: [0008:0000] type 00 class 0x000000
[ 3.880003] pci 0001:02:0a.0: [0008:0000] type 00 class 0x000000
[ 3.886361] pci 0001:02:0b.0: [0008:0000] type 00 class 0x000000
[ 3.892701] pci 0001:02:0c.0: [0008:0000] type 00 class 0x000000
[ 3.899045] pci 0001:02:0d.0: [0008:0000] type 00 class 0x000000
[ 3.905388] pci 0001:02:0e.0: [0008:0000] type 00 class 0x000000
[ 3.911760] pci 0001:02:0f.0: [0008:0000] type 00 class 0x000000
[ 3.918106] pci 0001:02:10.0: [0008:0000] type 00 class 0x000000
[ 3.924476] pci 0001:02:11.0: [0008:0000] type 00 class 0x000000
[ 3.930840] pci 0001:02:12.0: [0008:0000] type 00 class 0x000000
[ 3.937181] pci 0001:02:13.0: [0008:0000] type 00 class 0x000000
[ 3.943548] pci 0001:02:14.0: [0008:0000] type 00 class 0x000000
[ 3.949904] pci 0001:02:15.0: [0008:0000] type 00 class 0x000000
[ 3.956252] pci 0001:02:16.0: [0008:0000] type 00 class 0x000000
[ 3.962616] pci 0001:02:17.0: [0008:0000] type 00 class 0x000000
[ 3.968934] pci 0001:02:18.0: [0008:0000] type 00 class 0x000000
[ 3.975311] pci 0001:02:19.0: [0008:0000] type 00 class 0x000000
[ 3.981662] pci 0001:02:1a.0: [0008:0000] type 00 class 0x000000
[ 3.987999] pci 0001:02:1b.0: [0008:0000] type 00 class 0x000000
[ 3.994363] pci 0001:02:1c.0: [0008:0000] type 00 class 0x000000
[ 4.000723] pci 0001:02:1d.0: [0008:0000] type 00 class 0x000000
[ 4.007058] pci 0001:02:1e.0: [0008:0000] type 00 class 0x000000
[ 4.013407] pci 0001:02:1f.0: [0008:0000] type 00 class 0x000000
[ 4.019959] PCI: bus2: Fast back to back transfers disabled
[ 4.025581] pci 0001:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.033635] pci 0001:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 4.041885] pci 0001:03:00.0: [14e4:aa52] type 00 class 0x028000
[ 4.047923] pci_bus 0001:03: 2-byte config write to 0001:03:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 4.057647] pci 0001:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 4.064481] pci 0001:03:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 4.071471] pci 0001:03:00.0: supports D1 D2
[ 4.076855] PCI: bus3: Fast back to back transfers disabled
[ 4.082468] pci_bus 0001:03: busn_res: [bus 03-ff] end is updated to 03
[ 4.089314] pci 0001:04:00.0: [14e4:aa52] type 00 class 0x028000
[ 4.095374] pci_bus 0001:04: 2-byte config write to 0001:04:00.0 offset 0x4 may corrupt adjacent RW1C bits
[ 4.105096] pci 0001:04:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 4.111932] pci 0001:04:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 4.118917] pci 0001:04:00.0: supports D1 D2
[ 4.124322] PCI: bus4: Fast back to back transfers disabled
[ 4.129924] pci_bus 0001:04: busn_res: [bus 04-ff] end is updated to 04
[ 4.136588] pci_bus 0001:02: busn_res: [bus 02-ff] end is updated to 04
[ 4.143243] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 04
[ 4.149952] pci 0001:00:00.0: BAR 8: assigned [mem 0x40000000-0x40cfffff]
[ 4.156790] pci 0001:00:00.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.164577] pci 0001:01:00.0: BAR 8: assigned [mem 0x40000000-0x40bfffff]
[ 4.171393] pci 0001:01:00.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.179158] pci 0001:01:00.0: BAR 0: assigned [mem 0x40c00000-0x40c03fff]
[ 4.185976] pci 0001:01:00.0: BAR 7: no space for [io size 0x1000]
[ 4.192263] pci 0001:01:00.0: BAR 7: failed to assign [io size 0x1000]
[ 4.198907] pci 0001:02:01.0: BAR 8: assigned [mem 0x40000000-0x405fffff]
[ 4.205721] pci 0001:02:02.0: BAR 8: assigned [mem 0x40600000-0x40bfffff]
[ 4.212541] pci 0001:02:01.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.220310] pci 0001:02:01.0: BAR 7: no space for [io size 0x1000]
[ 4.226602] pci 0001:02:01.0: BAR 7: failed to assign [io size 0x1000]
[ 4.233247] pci 0001:03:00.0: BAR 2: assigned [mem 0x40000000-0x403fffff 64bit]
[ 4.240596] pci 0001:03:00.0: BAR 0: assigned [mem 0x40400000-0x40407fff 64bit]
[ 4.247944] pci 0001:02:01.0: PCI bridge to [bus 03]
[ 4.252935] pci 0001:02:01.0: bridge window [mem 0x40000000-0x405fffff]
[ 4.259741] pci 0001:02:01.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.267518] pci 0001:04:00.0: BAR 2: assigned [mem 0x40800000-0x40bfffff 64bit]
[ 4.274876] pci 0001:04:00.0: BAR 0: assigned [mem 0x40600000-0x40607fff 64bit]
[ 4.282225] pci 0001:02:02.0: PCI bridge to [bus 04]
[ 4.287204] pci 0001:02:02.0: bridge window [mem 0x40600000-0x40bfffff]
[ 4.294033] pci 0001:01:00.0: PCI bridge to [bus 02-04]
[ 4.299277] pci 0001:01:00.0: bridge window [mem 0x40000000-0x40bfffff]
[ 4.306088] pci 0001:01:00.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.313863] pci 0001:00:00.0: PCI bridge to [bus 01-04]
[ 4.319102] pci 0001:00:00.0: bridge window [mem 0x40000000-0x40cfffff]
[ 4.325914] pci 0001:00:00.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 4.333941] pci 0001:00:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[ 4.342321] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
[ 4.349847] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
[ 4.359476] pcie_iproc_bcma bcma0:9: non-prefetchable memory resource required
[ 4.480379] pcie_iproc_bcma bcma0:9: PHY or data link is INACTIVE!
[ 4.486585] pcie_iproc_bcma bcma0:9: no PCIe EP device detected
[ 4.493536] bcm47xx-wdt bcm47xx-wdt.0: BCM47xx Watchdog Timer enabled (30 seconds, Software Timer)
[ 4.502601] bcma-host-soc 18000000.axi: bus0: Bus registered
[ 4.509498] NET: Registered PF_INET6 protocol family
[ 4.515878] Segment Routing with IPv6
[ 4.519581] In-situ OAM (IOAM) with IPv6
[ 4.523616] NET: Registered PF_PACKET protocol family
[ 4.528732] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.542123] 8021q: 802.1Q VLAN Support v1.8
[ 4.546380] Registering SWP/SWPB emulation handler
[ 4.554393] b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
[ 4.683667] b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!
[ 4.694808] b53-srab-switch 18007000.ethernet-switch lan1 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
[ 4.707353] b53-srab-switch 18007000.ethernet-switch lan2 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY] (irq=POLL)
[ 4.719919] b53-srab-switch 18007000.ethernet-switch lan3 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY] (irq=POLL)
[ 4.732497] b53-srab-switch 18007000.ethernet-switch lan4 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY] (irq=POLL)
[ 4.745087] b53-srab-switch 18007000.ethernet-switch wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY] (irq=POLL)
[ 4.757053] DSA: tree 0 setup
[ 4.760961] UBI: auto-attach mtd4
[ 4.764306] ubi0: attaching mtd4
[ 4.937686] ubi0: scanning is finished
[ 4.950178] ubi0: attached mtd4 (name "ubi", size 32 MiB)
[ 4.955645] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 4.962554] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 4.969358] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 4.976344] ubi0: good PEBs: 256, bad PEBs: 0, corrupted PEBs: 0
[ 4.982381] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 4.989621] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1319723030
[ 4.998784] ubi0: available PEBs: 0, total reserved PEBs: 256, PEBs reserved for bad PEB handling: 20
[ 5.008074] ubi0: background thread "ubi_bgt0d" started, PID 337
[ 5.014928] block ubiblock0_0: created from ubi0:0(rootfs)
[ 5.020484] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 5.031533] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 5.039654] Freeing unused kernel image (initmem) memory: 1024K
[ 5.070557] Run /sbin/init as init process
[ 5.074669] with arguments:
[ 5.074673] /sbin/init
[ 5.074676] with environment:
[ 5.074679] HOME=/
[ 5.074683] TERM=linux
[ 5.399075] init: Console is alive
[ 5.402779] init: - watchdog -
[ 5.888979] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 5.968967] bcma_hcd bcma0:12: error -EBUSY: error obtaining VCC GPIO
[ 5.975496] bcma_hcd: probe of bcma0:12 failed with error -16
[ 5.990079] usbcore: registered new interface driver usbfs
[ 5.995712] usbcore: registered new interface driver hub
[ 6.001144] usbcore: registered new device driver usb
[ 6.010580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.018112] fsl-ehci: Freescale EHCI Host controller driver
[ 6.026061] ehci-platform: EHCI generic platform driver
[ 6.034345] ehci-platform 18021000.usb: EHCI Host Controller
[ 6.036688] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.040064] ehci-platform 18021000.usb: new USB bus registered, assigned bus number 1
[ 6.047142] ohci-platform: OHCI generic platform driver
[ 6.054432] ehci-platform 18021000.usb: irq 45, io mem 0x18021000
[ 6.059692] ohci-platform 18022000.usb: Generic Platform OHCI controller
[ 6.072425] ohci-platform 18022000.usb: new USB bus registered, assigned bus number 2
[ 6.080417] ohci-platform 18022000.usb: irq 45, io mem 0x18022000
[ 6.100458] ehci-platform 18021000.usb: USB 2.0 started, EHCI 1.00
[ 6.107305] hub 1-0:1.0: USB hub found
[ 6.111265] hub 1-0:1.0: 2 ports detected
[ 6.154987] hub 2-0:1.0: USB hub found
[ 6.158812] hub 2-0:1.0: 2 ports detected
[ 6.173846] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 6.187676] init: - preinit -
[ 6.750220] mtdblock: MTD device 'nvram' is NAND, please consider using UBI block devices instead.
[ 7.035265] mtdblock: MTD device 'nvram' is NAND, please consider using UBI block devices instead.
[ 7.450533] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
[ 7.459146] bgmac_bcma bcma0:5 eth2: Link is Up - 1Gbps/Full - flow control off
[ 7.466894] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 9.646079] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 9.651940] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 500
[ 9.700842] UBIFS (ubi0:1): recovery needed
[ 9.820295] UBIFS (ubi0:1): recovery completed
[ 9.824912] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 9.832794] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.842744] UBIFS (ubi0:1): FS size: 21966848 bytes (20 MiB, 173 LEBs), max 183 LEBs, journal size 1142784 bytes (1 MiB, 9 LEBs)
[ 9.854346] UBIFS (ubi0:1): reserved for root: 1037548 bytes (1013 KiB)
[ 9.860991] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID D155CD63-6248-4725-8B7E-002D4406B78E, small LPT model
[ 9.874608] mount_root: switching to ubifs overlay
[ 9.891420] urandom-seed: Seeding with /etc/urandom.seed
[ 10.018847] procd: - early -
[ 10.021929] procd: - watchdog -
[ 10.610690] procd: - watchdog -
[ 10.616317] procd: - ubus -
[ 10.671799] procd: - init -
[ 11.393369] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.473936] Loading modules backported from Linux version v6.6.15-0-g51f354b815c4
[ 11.481501] Backport generated by backports.git 193becf2
[ 11.588101] PPP generic driver version 2.4.2
[ 11.596025] NET: Registered PF_PPPOX protocol family
[ 11.620754] usbcore: registered new interface driver brcmfmac
[ 11.626695] pci 0000:00:00.0: enabling device (0140 -> 0142)
[ 11.632425] brcmfmac 0000:01:00.0: enabling device (0140 -> 0142)
[ 11.704656] urngd: v1.0.2 started.
[ 11.770600] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 11.779640] pci 0001:00:00.0: enabling device (0140 -> 0142)
[ 11.785354] pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 11.791055] pci 0001:02:01.0: enabling device (0140 -> 0142)
[ 11.796736] brcmfmac 0001:03:00.0: enabling device (0140 -> 0142)
[ 11.803441] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.bin failed with error -2
[ 11.965154] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 11.974219] pci 0001:02:02.0: enabling device (0140 -> 0142)
[ 11.979923] brcmfmac 0001:04:00.0: enabling device (0140 -> 0142)
[ 11.987136] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.bin failed with error -2
[ 12.013717] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[ 12.023721] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[ 12.035817] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 12.046277] brcmfmac 0001:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txcap_blob failed with error -2
[ 12.102541] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 12.112946] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txcap_blob failed with error -2
[ 12.162536] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 12.172147] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.netgear,r8000.bin failed with error -2
[ 12.189262] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.197684] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[ 12.210146] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 12.220597] brcmfmac 0001:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txcap_blob failed with error -2
[ 12.346156] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 12.357279] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 12.369487] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Sep 18 2015 03:30:01 version 7.35.177.56 (r587209) FWID 01-6cb8e269
[ 12.386827] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 12.397943] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 12.408432] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Sep 18 2015 03:30:01 version 7.35.177.56 (r587209) FWID 01-6cb8e269
[ 12.445165] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 12.456339] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 12.464517] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Sep 18 2015 03:30:01 version 7.35.177.56 (r587209) FWID 01-6cb8e269
[ 18.514940] bgmac_bcma bcma0:5 eth2: Link is Up - 1Gbps/Full - flow control off
[ 18.523811] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 18.536888] b53-srab-switch 18007000.ethernet-switch lan1: configuring for phy/gmii link mode
[ 18.554612] br-lan: port 1(lan1) entered blocking state
[ 18.559917] br-lan: port 1(lan1) entered disabled state
[ 18.565665] device lan1 entered promiscuous mode
[ 18.570324] device eth2 entered promiscuous mode
[ 18.691267] b53-srab-switch 18007000.ethernet-switch lan2: configuring for phy/gmii link mode
[ 18.704565] br-lan: port 2(lan2) entered blocking state
[ 18.709850] br-lan: port 2(lan2) entered disabled state
[ 18.715600] device lan2 entered promiscuous mode
[ 18.820995] b53-srab-switch 18007000.ethernet-switch lan3: configuring for phy/gmii link mode
[ 18.835927] br-lan: port 3(lan3) entered blocking state
[ 18.841279] br-lan: port 3(lan3) entered disabled state
[ 18.846976] device lan3 entered promiscuous mode
[ 18.953423] b53-srab-switch 18007000.ethernet-switch lan4: configuring for phy/gmii link mode
[ 18.981846] br-lan: port 4(lan4) entered blocking state
[ 18.987162] br-lan: port 4(lan4) entered disabled state
[ 19.010582] device lan4 entered promiscuous mode
[ 19.141092] b53-srab-switch 18007000.ethernet-switch wan: configuring for phy/gmii link mode
[ 21.348314] brcmfmac 0000:01:00.0 phy0-ap0: renamed from wlan1
[ 21.529899] br-lan: port 5(phy0-ap0) entered blocking state
[ 21.535652] br-lan: port 5(phy0-ap0) entered disabled state
[ 21.541543] device phy0-ap0 entered promiscuous mode
[ 21.556920] device phy0-ap0 left promiscuous mode
[ 21.561818] br-lan: port 5(phy0-ap0) entered disabled state
[ 21.592717] br-lan: port 5(phy0-ap0) entered blocking state
[ 21.598332] br-lan: port 5(phy0-ap0) entered disabled state
[ 21.604283] device phy0-ap0 entered promiscuous mode
[ 21.709883] brcmfmac 0001:04:00.0 phy2-ap0: renamed from wlan0
[ 21.829180] br-lan: port 6(phy2-ap0) entered blocking state
[ 21.834857] br-lan: port 6(phy2-ap0) entered disabled state
[ 21.840798] device phy2-ap0 entered promiscuous mode
[ 21.858983] device phy2-ap0 left promiscuous mode
[ 21.863941] br-lan: port 6(phy2-ap0) entered disabled state
[ 21.892415] br-lan: port 6(phy2-ap0) entered blocking state
[ 21.898035] br-lan: port 6(phy2-ap0) entered disabled state
[ 21.903979] device phy2-ap0 entered promiscuous mode
[ 22.053728] IPv6: ADDRCONF(NETDEV_CHANGE): phy0-ap0: link becomes ready
[ 22.060637] br-lan: port 5(phy0-ap0) entered blocking state
[ 22.066280] br-lan: port 5(phy0-ap0) entered forwarding state
[ 22.080516] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 22.200466] brcmfmac 0001:03:00.0 phy1-ap0: renamed from wlan2
[ 22.267194] br-lan: port 7(phy1-ap0) entered blocking state
[ 22.272860] br-lan: port 7(phy1-ap0) entered disabled state
[ 22.278681] device phy1-ap0 entered promiscuous mode
[ 22.304656] device phy1-ap0 left promiscuous mode
[ 22.309518] br-lan: port 7(phy1-ap0) entered disabled state
[ 22.342398] br-lan: port 7(phy1-ap0) entered blocking state
[ 22.348027] br-lan: port 7(phy1-ap0) entered disabled state
[ 22.354042] device phy1-ap0 entered promiscuous mode
[ 23.113154] IPv6: ADDRCONF(NETDEV_CHANGE): phy2-ap0: link becomes ready
[ 23.119941] br-lan: port 6(phy2-ap0) entered blocking state
[ 23.125574] br-lan: port 6(phy2-ap0) entered forwarding state
[ 23.361714] b53-srab-switch 18007000.ethernet-switch wan: Link is Up - 1Gbps/Full - flow control rx/tx
[ 23.371153] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
[ 23.850129] IPv6: ADDRCONF(NETDEV_CHANGE): phy1-ap0: link becomes ready
[ 23.857038] br-lan: port 7(phy1-ap0) entered blocking state
[ 23.862707] br-lan: port 7(phy1-ap0) entered forwarding state
[-- Attachment #3: ddwrt.r55416.txt --]
[-- Type: text/plain, Size: 45287 bytes --]
[hranislav@toshiba-laptop ~]$ mactelnet r8000
Searching for 'r8000'...found
Login: root
Password:
Connecting to 2c:30:33:59:aa:55...done
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.36.1 (2024-03-19 05:14:22 +06) built-in shell (ash)
~ # for f in brcmfmac43602-pcie.*; do strings $f | tail -1;in brcmfmac43602-pcie.*; do strings $f | tail -1;
> >
NOTHING NO MICROCODE VERSION
~ # cat /tmp/wlan2_hostap.conf
eee80211h=1
no_country_ie=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx_freq=5210
hw_mode=a
basic_rates=60 120 240
channel=44
frequency=5220
beacon_int=100
interface=wlan2
no_country_ie=1
preamble=1
disassoc_low_ack=1
wmm_enabled=1
ignore_broadcast_ssid=0
max_num_sta=256
dtim_period=2
ssid=Marko&Pavle
bridge=br0
bridge=br0
logger_syslog=-1
logger_stdout=-1
logger_stdout_level=2
eapol_version=1
eapol_key_index_workaround=0
wpa=2
ieee80211w=0
wpa_passphrase=mojabeti12
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
okc=0
disable_pmksa_caching=1
wpa_group_rekey=3600
wpa_strict_rekey=0
signal_connect=-128
signal_stay=-128
signal_poll_time=10
signal_strikes=3
~ # eee80211h=1
no_country_ie=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx_freq=5210
hw_mode=a
basic_rates=60 120 240
channel=44
frequency=5220
beacon_int=100
interface=wlan2
no_country_ie=1
preamble=1
disassoc_low_ack=1
wmm_enabled=1
ignore_broadcast_ssid=0
max_num_sta=256
dtim_period=2
ssid=Marko&Pavle
bridge=br0
bridge=br0
logger_syslog=-1
logger_stdout=-1
logger_stdout_level=2
eapol_version=1
eapol_key_index_workaround=0
wpa=2
ieee80211w=0
wpa_passphrase=mojabeti12
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
okc=0
disable_pmksa_caching=1
wpa_group_rekey=3600
wpa_strict_rekey=0
signal_connect=-128
signal_stay=-128
signal_poll_time=10
signal_strikes=3
~ # cat /tmp/wlan0_hostap.conf
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
country_code=US
tx_queue_data2_burst=2.0
wmm_ac_be_txop_limit=0
ieee80211n=1
noscan=1
dynamic_ht40=0
ht_capab=[HT40+][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
vht_capab=[SHORT-GI-80][MAX-A-MPDU-LEN-EXP0]
ieee80211ac=1
ieee80211d=1
ieee80211h=1
no_country_ie=1
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx_freq=5210
hw_mode=a
basic_rates=60 120 240
channel=44
frequency=5220
beacon_int=100
interface=wlan2
no_country_ie=1
preamble=1
disassoc_low_ack=1
wmm_enabled=1
ignore_broadcast_ssid=0
max_num_sta=256
dtim_period=2
ssid=Marko&Pavle
bridge=br0
bridge=br0
logger_syslog=-1
logger_stdout=-1
logger_stdout_level=2
eapol_version=1
eapol_key_index_workaround=0
wpa=2
ieee80211w=0
wpa_passphrase=mojabeti12
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
okc=0
disable_pmksa_caching=1
wpa_group_rekey=3600
wpa_strict_rekey=0
signal_connect=-128
signal_stay=-128
signal_poll_time=10
signal_strikes=3
~ # ~ # cat /tmp/wlan1_hostap.conf
driver=nl80211
ctrl_interface=/var/run/hostapd
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
tx_queue_data3_aifs=7
tx_queue_data3_cwmin=15
tx_queue_data3_cwmax=1023
tx_queue_data3_burst=0
tx_queue_data2_aifs=3
tx_queue_data2_cwmin=15
tx_queue_data2_cwmax=63
tx_queue_data1_aifs=1
tx_queue_data1_cwmin=7
tx_queue_data1_cwmax=15
tx_queue_data1_burst=3.0
tx_queue_data0_aifs=1
tx_queue_data0_cwmin=3
tx_queue_data0_cwmax=7
tx_queue_data0_burst=1.5
country_code=US
tx_queue_data2_burst=2.0
wmm_ac_be_txop_limit=0
ieee80211n=1
noscan=1
dynamic_ht40=0
ht_capab=[HT20][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
hw_mode=g
basic_rates=10 20 55 60 110 120 240
supported_rates=10 20 55 60 90 110 120 180 240 360 480 540
channel=6
frequency=2437
beacon_int=100
interface=wlan1
vht_capab=[MAX-A-MPDU-LEN-EXP0]
ieee80211ac=1
vht_oper_chwidth=0
no_country_ie=1
vendor_vht=1
preamble=1
disassoc_low_ack=1
wmm_enabled=1
ignore_broadcast_ssid=0
max_num_sta=256
dtim_period=2
ssid=Marko&Pavle
bridge=br0
bridge=br0
logger_syslog=-1
logger_stdout=-1
logger_stdout_level=2
eapol_version=1
eapol_key_index_workaround=0
wpa=2
ieee80211w=0
wpa_passphrase=mojabeti12
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
okc=0
disable_pmksa_caching=1
wpa_group_rekey=3600
wpa_strict_rekey=0
signal_connect=-128
signal_stay=-128
signal_poll_time=10
signal_strikes=3
~ # dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Northstar Prototype
[ 0.000000] Ignoring unrecognised tag 0x00000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] map io
[ 0.000000] MPCORE found at 19020000 (VIRT 99020000) 18000000 98000000
[ 0.000000] Hit pending asynchronous external abort (FSR=0x00001c06) during first unmask, this is most likely caused by a firmware/bootloader bug.
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat 805c26c0, node_mem_map 86bb8000
[ 0.000000] Normal zone: 288 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32768 pages, LIFO batch:7
[ 0.000000] HighMem zone: 32768 pages, LIFO batch:7
[ 0.000000] PERCPU: Embedded 11 pages/cpu @86b94000 s12588 r8192 d24276 u45056
[ 0.000000] pcpu-alloc: s12588 r8192 d24276 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65248
[ 0.000000] Kernel command line: console=ttyS0,115200 panic=10 root=/dev/mtdblock3 earlyprintk=1 rootfstype=squashfs,jffs2 noinitrd init=/bin/sh
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 253004K/262144K available (4029K kernel code, 271K rwdata, 1412K rodata, 340K init, 487K bss, 9140K reserved, 0K cma-reserved, 131072K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0x88800000 - 0xff800000 (1904 MB)
[ 0.000000] lowmem : 0x80000000 - 0x88000000 ( 128 MB)
[ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
[ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80008000 - 0x80558b34 (5443 kB)
[ 0.000000] .init : 0x80559000 - 0x805ae000 ( 340 kB)
[ 0.000000] .data : 0x805ae000 - 0x805f1d1c ( 272 kB)
[ 0.000000] .bss : 0x805f4000 - 0x8066df04 ( 488 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] MPCORE GIC init
[ 0.000000] soc_dmu_init
[ 0.000000] add clk lookups
[ 0.000000] MPCORE Global Timer Clock 500000000Hz on IRQ 27
[ 0.000007] sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 4294967295ns
[ 0.000031] clocksource: mpcore_gtimer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[ 0.000054] register local timer
00] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
[ 0.000000] .text : 0x80008000 - 0x80558b34 (5443 kB)
[ 0.000000] .init : 0x80559000 - 0x805ae000 ( 340 kB)
[ 0.000000] .data : 0x805ae000 - 0x805f1d1c ( 272 kB)
[ 0.000000] .bss : 0x805f4000 - 0x8066df04 ( 488 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] MPCORE GIC init
[ 0.000000] soc_dmu_init
[ 0.000000] add clk lookups
[ 0.000000] MPCORE Global Timer Clock 500000000Hz on IRQ 27
[ 0.000007] sched_clock: 32 bits at 500MHz, resolution 2ns, wraps every 4294967295ns
[ 0.000031] clocksource: mpcore_gtimer: mask: 0xffffffffffffffff max_cycles: 0xe6a171a037, max_idle_ns: 881590485102 ns
[ 0.000054] register local timer
[ 0.000095] smp_twd: clock not found -2
[ 0.000132] Calibrating local timer... 499.75MHz.
[ 0.060078] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
[ 0.120070] pid_max: default: 32768 minimum: 301
[ 0.120201] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.120219] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.120954] Initializing cgroup subsys io
[ 0.120985] Initializing cgroup subsys memory
[ 0.121032] Initializing cgroup subsys pids
[ 0.121096] CPU: Testing write buffer coherency: ok
[ 0.121426] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.121441] 2 cores has been found
[ 0.121542] Setting up static identity map for 0x85e0 - 0x8614
[ 0.121653] L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
[ 0.180062] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.180131] Brought up 2 CPUs
[ 0.180145] SMP: Total of 2 processors activated (3981.31 BogoMIPS).
[ 0.183875] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.183910] futex hash table entries: 512 (order: 2, 16384 bytes)
[ 0.184414] NET: Registered protocol family 16
[ 0.185055] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.185633] coherence_win_size = 10000000
[ 0.185646] coherence_flag = FFFFFFF8
[ 0.185651] ddr_phys_offset_va =FFFFFFFF
[ 0.185655] ddr_phys_offset2_va =A8000000
[ 0.185682] Found a AMD NAND flash:
[ 0.185687] Total size: 128MB
[ 0.185691] Block size: 128KB
[ 0.185695] Page Size: 2048B
[ 0.185699] OOB Size: 64B
[ 0.185703] Sector size: 512B
[ 0.185707] Spare size: 16B
[ 0.185711] ECC level: 8 (8-bit)
[ 0.185717] Device ID: 0x 1 0xf1 0x80 0x1d 0x 1 0xf1
[ 0.211716] found nand nvram at 80000
[ 0.211945] CCA UART Clock Config: Sel=1 Ovr=1 Div=48
[ 0.211953] CCA UART Clock rate 125000000Hz CCB UART Clock rate 125000000Hz
[ 0.241022] alg: self-tests for poly1305-generic (poly1305) passed
[ 0.242742] clocksource: Switched to clocksource mpcore_gtimer
[ 0.243904] NET: Registered protocol family 2
[ 0.244044] IP idents hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.244427] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.244446] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.244464] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.244517] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.244544] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.244688] NET: Registered protocol family 1
[ 0.244735] PCI: CLS 0 bytes, default 32
[ 0.245109] alg: self-tests for aes-asm (aes) passed
[ 0.245466] alg: self-tests for sha1-asm (sha1) passed
[ 0.245812] alg: self-tests for sha256-asm (sha256) passed
[ 0.246082] alg: self-tests for sha224-asm (sha224) passed
[ 0.246598] alg: self-tests for sha384-arm (sha384) passed
[ 0.247099] alg: self-tests for sha512-arm (sha512) passed
[ 0.247285] alg: self-tests for poly1305-arm (poly1305) passed
[ 0.247310] init gpio code
[ 0.248938] Netgear R8000 init
[ 0.249294] PCI: no core
[ 0.249300] PCI: no core
[ 0.249565] PCI: scanning bus 0
[ 0.249668] PCI host bridge to bus 0000:00
[ 0.249687] pci_bus 0000:00: root bus resource [io 0x0000-0xffffffff]
[ 0.249697] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.249709] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.249735] pci 0000:00:00.0: [14e4:0800] type 00 class 0x050100
[ 0.249762] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x18000fff]
[ 0.249784] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.249958] pci 0000:00:01.0: [14e4:050b] type 00 class 0xffffff
[ 0.249981] pci 0000:00:01.0: reg 0x10: [mem 0x18001000-0x18001fff]
[ 0.250046] pci 0000:00:01.0: reg 0x14: [mem 0x18002000-0x18002fff]
[ 0.250063] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250191] pci 0000:00:02.0: [14e4:0502] type 00 class 0xffffff
[ 0.250210] pci 0000:00:02.0: reg 0x10: [mem 0x1802c000-0x1802cfff]
[ 0.250230] pci 0000:00:02.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250344] pci 0000:00:03.0: [14e4:4715] type 00 class 0x020000
[ 0.250363] pci 0000:00:03.0: reg 0x10: [mem 0x18024000-0x18024fff]
[ 0.250384] pci 0000:00:03.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250504] pci 0000:00:04.0: [14e4:4715] type 00 class 0x020000
[ 0.250525] pci 0000:00:04.0: reg 0x10: [mem 0x18025000-0x18025fff]
[ 0.250544] pci 0000:00:04.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250657] pci 0000:00:05.0: [14e4:4715] type 00 class 0x020000
[ 0.250675] pci 0000:00:05.0: reg 0x10: [mem 0x18026000-0x18026fff]
[ 0.250695] pci 0000:00:05.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250819] pci 0000:00:06.0: [14e4:4715] type 00 class 0x020000
[ 0.250836] pci 0000:00:06.0: reg 0x10: [mem 0x18027000-0x18027fff]
[ 0.250857] pci 0000:00:06.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.250972] pci 0000:00:07.0: [14e4:0501] type 00 class 0xffffff
[ 0.250990] pci 0000:00:07.0: reg 0x10: [mem 0x18012000-0x18012fff]
[ 0.251010] pci 0000:00:07.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251134] pci 0000:00:08.0: [14e4:0501] type 00 class 0xffffff
[ 0.251152] pci 0000:00:08.0: reg 0x10: [mem 0x18013000-0x18013fff]
[ 0.251172] pci 0000:00:08.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251285] pci 0000:00:09.0: [14e4:0501] type 00 class 0xffffff
[ 0.251303] pci 0000:00:09.0: reg 0x10: [mem 0x18014000-0x18014fff]
[ 0.251321] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251442] pci 0000:00:0a.0: [14e4:0510] type 00 class 0xffffff
[ 0.251461] pci 0000:00:0a.0: reg 0x10: [mem 0x1800b000-0x1800bfff]
[ 0.251473] pci 0000:00:0a.0: reg 0x14: [mem 0x1800c000-0x1800cfff]
[ 0.251490] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251615] pci 0000:00:0b.0: [14e4:471a] type 00 class 0x0c0310
[ 0.251632] pci 0000:00:0b.0: reg 0x10: [mem 0x18022000-0x18022fff]
[ 0.251651] pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251774] pci 0000:00:0b.1: [14e4:471a] type 00 class 0x0c0320
[ 0.251792] pci 0000:00:0b.1: reg 0x10: [mem 0x18021000-0x18021fff]
[ 0.251812] pci 0000:00:0b.1: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.251939] pci 0000:00:0c.0: [14e4:472a] type 00 class 0x0c0330
[ 0.251959] pci 0000:00:0c.0: reg 0x10: [mem 0x18023000-0x18023fff]
[ 0.251980] pci 0000:00:0c.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252097] pci 0000:00:0d.0: [14e4:0503] type 00 class 0xffffff
[ 0.252115] pci 0000:00:0d.0: reg 0x10: [mem 0x18020000-0x18020fff]
[ 0.252135] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252262] pci 0000:00:0e.0: [14e4:4711] type 00 class 0x040100
[ 0.252280] pci 0000:00:0e.0: reg 0x10: [mem 0x1802a000-0x1802afff]
[ 0.252300] pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252416] pci 0000:00:0f.0: [14e4:0506] type 00 class 0xffffff
[ 0.252434] pci 0000:00:0f.0: reg 0x10: [mem 0x18210000-0x1821ffff]
[ 0.252454] pci 0000:00:0f.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252572] pci 0000:00:10.0: [14e4:0507] type 00 class 0xffffff
[ 0.252589] pci 0000:00:10.0: reg 0x10: [mem 0x18010000-0x18010fff]
[ 0.252609] pci 0000:00:10.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252740] pci 0000:00:11.0: [14e4:0508] type 00 class 0xffffff
[ 0.252758] pci 0000:00:11.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
[ 0.252779] pci 0000:00:11.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.252896] pci 0000:00:12.0: [14e4:0509] type 00 class 0xffffff
[ 0.252917] pci 0000:00:12.0: reg 0x10: [mem 0x18028000-0x18028fff]
[ 0.252937] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.253065] pci 0000:00:13.0: [14e4:050a] type 00 class 0xffffff
[ 0.253088] pci 0000:00:13.0: reg 0x10: [mem 0x18029000-0x18029fff]
[ 0.253108] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x000007ff pref]
[ 0.253232] PCI: Fixing up bus 0 domain 0
[ 0.618699] PCIE1 link=1
[ 0.618975] PCIE1 switching to GEN2
[ 0.968409] PCIE1 link=1
[ 0.968516] PCI host bridge to bus 0001:00
[ 0.968535] pci_bus 0001:00: root bus resource [mem 0x08000000-0x0fffffff]
[ 0.968544] pci_bus 0001:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.968573] pci 0001:00:00.0: [14e4:8012] type 01 class 0x060400
[ 0.968630] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.968775] PCI: Fixing up bus 0 domain 1
[ 0.968787] PCI: bus0: Fast back to back transfers disabled
[ 0.968896] pci 0001:01:00.0: [14e4:aa52] type 00 class 0x028000
[ 0.968936] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 0.968953] pci 0001:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 0.968983] pci 0001:01:00.0: Max Payload Size set to 512 (was 128, max 512)
[ 0.969046] pci 0001:01:00.0: supports D1 D2
[ 0.969160] PCI: Fixing up bus 1 domain 1
[ 0.969175] PCI: bus1: Fast back to back transfers disabled
[ 0.969186] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.969199] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.969266] pci 0001:00:00.0: BAR 8: assigned [mem 0x08000000-0x085fffff]
[ 0.969280] pci 0001:01:00.0: BAR 2: assigned [mem 0x08000000-0x083fffff 64bit]
[ 0.969299] pci 0001:01:00.0: BAR 0: assigned [mem 0x08400000-0x08407fff 64bit]
[ 0.969315] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.969324] pci 0001:00:00.0: bridge window [mem 0x08000000-0x085fffff]
[ 1.318795] PCIE2 link=1
[ 1.319089] PCIE2 switching to GEN2
[ 1.668528] PCIE2 link=1
[ 1.668640] PCI host bridge to bus 0002:00
[ 1.668657] pci_bus 0002:00: root bus resource [mem 0x40000000-0x47ffffff]
[ 1.668667] pci_bus 0002:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.668696] pci 0002:00:00.0: [14e4:8012] type 01 class 0x060400
[ 1.668747] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[ 1.668881] PCI: Fixing up bus 0 domain 2
[ 1.668894] PCI: bus0: Fast back to back transfers disabled
[ 1.668982] PCIE: Doing PLX switch Init...Test Read = fb410003
[ 1.668993] PCIE: Doing PLX switch Init...GPIO Read = 0000003c
[ 1.718860] PCIE: Setting PEX8603 UpPort to 0dB de-emphasis.
[ 1.718868] PCIE 0002:01:0000: PLX UpPort mem_base 0x40000000, mem_limit 0x41ffffff
[ 1.718917] pci 0002:01:00.0: [10b5:8603] type 01 class 0x060400
[ 1.718963] pci 0002:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff]
[ 1.719065] pci 0002:01:00.0: supports D1 D2
[ 1.719074] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.719213] PCI: Fixing up bus 1 domain 2
[ 1.719233] PCI: bus1: Fast back to back transfers disabled
[ 1.719367] PCIE: Doing PLX switch Init...Test Read = fb410003
[ 1.719379] PCIE: Doing PLX switch Init...GPIO Read = 00000000
[ 1.769249] PCIE 0002:02:0008: PLX DownPort mem_base 0x43000000, mem_limit 0x44ffffff
[ 1.868970] PCIE 0002:02:0008: PLX DownPort Link speed is GEN2
[ 1.868975] PCIE 0002:02:0008: PLX DownPort Link status 0x6012
[ 1.869020] pci 0002:02:01.0: [10b5:8603] type 01 class 0x060400
[ 1.869159] pci 0002:02:01.0: supports D1 D2
[ 1.869168] pci 0002:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.869306] PCIE: Doing PLX switch Init...Test Read = fb410003
[ 1.869317] PCIE: Doing PLX switch Init...GPIO Read = 00000000
[ 1.919186] PCIE 0002:02:0010: PLX DownPort mem_base 0x46000000, mem_limit 0x47ffffff
[ 2.018907] PCIE 0002:02:0010: PLX DownPort Link speed is GEN2
[ 2.018912] PCIE 0002:02:0010: PLX DownPort Link status 0x6012
[ 2.018964] pci 0002:02:02.0: [10b5:8603] type 01 class 0x060400
[ 2.019100] pci 0002:02:02.0: supports D1 D2
[ 2.019108] pci 0002:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.019264] PCI: Fixing up bus 2 domain 2
[ 2.019295] PCI: bus2: Fast back to back transfers disabled
[ 2.019449] pci 0002:03:00.0: [14e4:aa52] type 00 class 0x028000
[ 2.019510] pci 0002:03:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 2.019534] pci 0002:03:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 2.019664] pci 0002:03:00.0: supports D1 D2
[ 2.019805] PCI: Fixing up bus 3 domain 2
[ 2.019823] PCI: bus3: Fast back to back transfers disabled
[ 2.019835] pci_bus 0002:03: busn_res: [bus 03-ff] end is updated to 03
[ 2.019995] pci 0002:04:00.0: [14e4:aa52] type 00 class 0x028000
[ 2.020058] pci 0002:04:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
[ 2.020081] pci 0002:04:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
[ 2.020214] pci 0002:04:00.0: supports D1 D2
[ 2.020359] PCI: Fixing up bus 4 domain 2
[ 2.020376] PCI: bus4: Fast back to back transfers disabled
[ 2.020388] pci_bus 0002:04: busn_res: [bus 04-ff] end is updated to 04
[ 2.020402] pci_bus 0002:02: busn_res: [bus 02-ff] end is updated to 04
[ 2.020415] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 04
[ 2.020426] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 04
[ 2.020546] pci 0002:00:00.0: BAR 8: assigned [mem 0x40000000-0x40cfffff]
[ 2.020559] pci 0002:00:00.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020573] pci 0002:01:00.0: BAR 8: assigned [mem 0x40000000-0x40bfffff]
[ 2.020583] pci 0002:01:00.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020592] pci 0002:01:00.0: BAR 0: assigned [mem 0x40c00000-0x40c03fff]
[ 2.020604] pci 0002:01:00.0: BAR 7: no space for [io size 0x1000]
[ 2.020613] pci 0002:01:00.0: BAR 7: failed to assign [io size 0x1000]
[ 2.020625] pci 0002:02:01.0: BAR 8: assigned [mem 0x40000000-0x405fffff]
[ 2.020634] pci 0002:02:02.0: BAR 8: assigned [mem 0x40600000-0x40bfffff]
[ 2.020643] pci 0002:02:01.0: BAR 9: assigned [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020651] pci 0002:02:01.0: BAR 7: no space for [io size 0x1000]
[ 2.020659] pci 0002:02:01.0: BAR 7: failed to assign [io size 0x1000]
[ 2.020669] pci 0002:03:00.0: BAR 2: assigned [mem 0x40000000-0x403fffff 64bit]
[ 2.020693] pci 0002:03:00.0: BAR 0: assigned [mem 0x40400000-0x40407fff 64bit]
[ 2.020715] pci 0002:02:01.0: PCI bridge to [bus 03]
[ 2.020726] pci 0002:02:01.0: bridge window [mem 0x40000000-0x405fffff]
[ 2.020735] pci 0002:02:01.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020749] pci 0002:04:00.0: BAR 2: assigned [mem 0x40800000-0x40bfffff 64bit]
[ 2.020772] pci 0002:04:00.0: BAR 0: assigned [mem 0x40600000-0x40607fff 64bit]
[ 2.020793] pci 0002:02:02.0: PCI bridge to [bus 04]
[ 2.020803] pci 0002:02:02.0: bridge window [mem 0x40600000-0x40bfffff]
[ 2.020817] pci 0002:01:00.0: PCI bridge to [bus 02-04]
[ 2.020826] pci 0002:01:00.0: bridge window [mem 0x40000000-0x40bfffff]
[ 2.020835] pci 0002:01:00.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.020846] pci 0002:00:00.0: PCI bridge to [bus 01-04]
[ 2.020854] pci 0002:00:00.0: bridge window [mem 0x40000000-0x40cfffff]
[ 2.020862] pci 0002:00:00.0: bridge window [mem 0x40d00000-0x40efffff 64bit pref]
[ 2.270576] PCIE3 link=0
[ 2.276805] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.277033] alg: self-tests for cipher_null-generic (cipher_null) passed
[ 2.277119] alg: self-tests for ecb-cipher_null (ecb(cipher_null)) passed
[ 2.277189] alg: self-tests for compress_null-generic (compress_null) passed
[ 2.277262] alg: self-tests for digest_null-generic (digest_null) passed
[ 2.277439] alg: self-tests for md4-generic (md4) passed
[ 2.277610] alg: self-tests for md5-generic (md5) passed
[ 2.277864] alg: self-tests for sha1-generic (sha1) passed
[ 2.278168] alg: self-tests for sha256-generic (sha256) passed
[ 2.278462] alg: self-tests for sha224-generic (sha224) passed
[ 2.278644] alg: self-tests for aes-generic (aes) passed
[ 2.278824] alg: self-tests for arc4-generic (arc4) passed
[ 2.279396] alg: self-tests for ecb(arc4)-generic (ecb(arc4)) passed
[ 2.279757] alg: self-tests for crc32c-generic (crc32c) passed
[ 2.280356] alg: self-tests for drbg_pr_ctr_aes128 (stdrng) passed
[ 2.280450] alg: self-tests for drbg_pr_ctr_aes192 (stdrng) passed
[ 2.280528] alg: self-tests for drbg_pr_ctr_aes256 (stdrng) passed
[ 2.280600] alg: self-tests for drbg_pr_sha1 (stdrng) passed
[ 2.280675] alg: self-tests for drbg_pr_sha384 (stdrng) passed
[ 2.280754] alg: self-tests for drbg_pr_sha512 (stdrng) passed
[ 2.281167] alg: self-tests for drbg_pr_sha256 (stdrng) passed
[ 2.281252] alg: self-tests for drbg_pr_hmac_sha1 (stdrng) passed
[ 2.281331] alg: self-tests for drbg_pr_hmac_sha384 (stdrng) passed
[ 2.281404] alg: self-tests for drbg_pr_hmac_sha512 (stdrng) passed
[ 2.282305] alg: self-tests for hmac(sha256-asm) (hmac(sha256)) passed
[ 2.283209] alg: self-tests for drbg_pr_hmac_sha256 (stdrng) passed
[ 2.283695] alg: self-tests for drbg_nopr_ctr_aes128 (stdrng) passed
[ 2.283900] alg: self-tests for drbg_nopr_ctr_aes192 (stdrng) passed
[ 2.284104] alg: self-tests for drbg_nopr_ctr_aes256 (stdrng) passed
[ 2.284186] alg: self-tests for drbg_nopr_sha1 (stdrng) passed
[ 2.284262] alg: self-tests for drbg_nopr_sha384 (stdrng) passed
[ 2.284338] alg: self-tests for drbg_nopr_sha512 (stdrng) passed
[ 2.284633] alg: self-tests for drbg_nopr_sha256 (stdrng) passed
[ 2.284728] alg: self-tests for drbg_nopr_hmac_sha1 (stdrng) passed
[ 2.284807] alg: self-tests for drbg_nopr_hmac_sha384 (stdrng) passed
[ 2.284880] alg: self-tests for drbg_nopr_hmac_sha512 (stdrng) passed
[ 2.285724] alg: self-tests for drbg_nopr_hmac_sha256 (stdrng) passed
[ 2.287123] alg: self-tests for jitterentropy_rng (jitterentropy_rng) passed
[ 2.287483] alg: self-tests for ghash-generic (ghash) passed
[ 2.287516] NET: Registered protocol family 38
[ 2.287660] io scheduler noop registered (default)
[ 2.287721] io scheduler cfq registered
[ 2.288995] serial8250_init
[ 2.289013] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
[ 2.289518] console [ttyS0] disabled
[ 2.289563] serial8250.0: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 7812500) is a 16550
[ 3.575404] console [ttyS0] enabled
[ 3.579149] serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117, base_baud = 7812500) is a 16550
[ 3.596909] brd: module loaded
[ 3.604786] loop: module loaded
[ 3.608832] bcmsflash: found no supported devices
[ 4.199136] Boot partition size = 524288(0x80000)
[ 4.205742] lookup_nflash_rootfs_offset: offset = 0x200000 size = 0x2400000, 0x20000
[ 4.214409] found TRX Header on nflash!
[ 4.219152] nflash: squash filesystem with lzma found at block 32
[ 4.227269] Creating 5 MTD partitions on "nflash":
[ 4.232082] 0x000000000000-0x000000080000 : "boot"
[ 4.237579] 0x000000080000-0x000000200000 : "nvram"
[ 4.243433] 0x000000200000-0x000002600000 : "linux"
[ 4.249258] 0x000000400000-0x000002600000 : "rootfs"
[ 4.254919] 0x000002600000-0x000002680000 : "board_data"
[ 4.260975] PPP generic driver version 2.4.2
[ 4.265469] PPP BSD Compression module registered
[ 4.270196] PPP Deflate Compression module registered
[ 4.275291] PPP MPPE Compression module registered
[ 4.280103] NET: Registered protocol family 24
[ 4.284584] i2c /dev entries driver
[ 4.288143] GACT probability NOT on
[ 4.291658] Mirror/redirect action on
[ 4.295343] Simple TC action Loaded
[ 4.299375] netem: version 1.3
[ 4.302484] u32 classifier
[ 4.305197] Performance counters on
[ 4.309035] input device check on
[ 4.312714] Actions configured
[ 4.316144] Netfilter messages via NETLINK v0.30.
[ 4.320902] nf_conntrack version 0.5.0.4 (3953 buckets, 15812 max)
[ 4.327561] nf_conntrack_rtsp v0.7 loading
[ 4.332040] xt_time: kernel timezone is -0000
[ 4.336424] ip_set: protocol 6
[ 4.339701] gre: GRE over IPv4 demultiplexor driver
[ 4.344891] nf_nat_rtsp v0.7 loading
[ 4.348494] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.354082] NET: Registered protocol family 17
[ 4.358596] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 4.371462] Bridge firewalling registered
[ 4.375489] 8021q: 802.1Q VLAN Support v1.8
[ 4.379811] Registering SWP/SWPB emulation handler
[ 4.384647] max nvram space = 131072
[ 4.388271] read 65536 bytes to offset 0
[ 4.407195] registered taskstats version 1
[ 4.412152] Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
[ 4.420958] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 4.427324] nand: AMD/Spansion NAND 128MiB 3,3V 8-bit
[ 4.432396] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 4.439996] Spare area=64 eccbytes 56, ecc bytes located at:
[ 4.445662] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
[ 4.445662] Available 7 bytes at (off,len):
[ 4.464454] (1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0) (0,0)
[ 4.483218] Scanning device for bad blocks
[ 5.073857] Options: NO_SUBPAGE_WRITE,
[ 5.077650] Creating 1 MTD partitions on "brcmnand":
[ 5.082627] 0x000002680000-0x000008000000 : "ddwrt"
[ 5.093370] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[ 5.100833] Freeing unused kernel memory: 340K
[ 8.211237] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
[ 8.480732] eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.164.18 (r692288)
[ 8.538637] switch id 12
[ 8.541188] switch id32 53012
[ 8.544183] b5301x_common: found switch: BCM53012, rev 5
[ 8.685541] b53_robo_cpu_port_upd, pdesc[8].cpu=1
[ 8.690335] bcm_robo_config_vlan_fun vid=1, vlan->members=0x1af, vlan->untag=0xaf
[ 8.697956] bcm_robo_config_vlan_fun ports=0 1 2 3 5 7 8t
[ 8.703483] bcm_robo_config_vlan_fun vid=2, vlan->members=0x110, vlan->untag=0x110
[ 8.711165] bcm_robo_config_vlan_fun ports=4 8
[ 8.837360] Loading modules backported from Linux version v5.15.33-0-g06f50ca83ace
[ 8.844961] Backport generated by backports.git v5.15.33-1-0-g183c4ab2
[ 9.305707] PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
[ 9.458628] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 9.818658] scan for domain_nr 1 and bus 1
[ 9.822796] load nvram for 0
[ 9.825882] nvram len = 2066
[ 9.828841] Halt ARM.
[ 9.831119] Download FW brcm/brcmfmac43602-pcie.bin
[ 9.863611] Download NVRAM brcm/brcmfmac43602-pcie.txt
[ 9.868873] Bring ARM in running state
[ 9.908348] Wait for FW init
[ 9.968318] Shared RAM addr: 0x001e946c
[ 9.972177] Console: base 26eccc, buf 26e8c4, size 1024
[ 9.979988] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 9.985084] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 9.990997] 0001:01:00.0: CONSOLE: 604, Failed: 0
[ 9.995789] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.004603] brcmfmac 0001:01:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 10.014915] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 10.026614] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Jun 12 2022 22:08:58 version 7.49.6 (r588839) FWID 01-f458629d
[ 10.041172] 0001:01:00.0: CONSOLE:
[ 10.046476] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 10.055301] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was pfn_gscan_cfg
[ 10.063802] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 10.072446] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was pfn
[ 10.080089] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 10.088730] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was rsdb_mode
[ 10.096893] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 10.105536] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was tdls_enable
[ 10.114034] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 10.122676] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was pfn_macaddr
[ 10.131009] enabling firmware feature: MONITOR_FMT_RADIOTAP
[ 10.137896] brcmfmac: brcmf_setup_wiphybands: nmode=1, vhtmode=1, vhtmode_init=1 , bw_cap=(0, 7)
[ 10.151023] 0001:01:00.0: CONSOLE: 000000.241 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 10.161704] 0001:01:00.0: CONSOLE: 000000.241 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 10.172728] PCI: Enabling device 0002:03:00.0 (0140 -> 0142)
[ 10.328237] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.340994] scan for domain_nr 2 and bus 3
[ 10.345133] load nvram for 1
[ 10.348249] nvram len = 1303
[ 10.351207] Halt ARM.
[ 10.353491] Download FW brcm/brcmfmac43602-pcie.bin
[ 10.392506] Download NVRAM brcm/brcmfmac43602-pcie.txt
[ 10.397746] Bring ARM in running state
[ 10.438097] Wait for FW init
[ 10.498059] Shared RAM addr: 0x001e946c
[ 10.501919] Console: base 26eccc, buf 26e8c4, size 1024
[ 10.509749] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 10.514848] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 10.520767] 0002:03:00.0: CONSOLE: 604, Failed: 0
[ 10.526062] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.534845] brcmfmac 0002:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 10.545161] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 10.556902] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Jun 12 2022 22:08:58 version 7.49.6 (r588839) FWID 01-f458629d
[ 10.571594] 0002:03:00.0: CONSOLE:
[ 10.578475] enabling firmware feature: MONITOR_FMT_RADIOTAP
[ 10.585648] brcmfmac: brcmf_setup_wiphybands: nmode=1, vhtmode=1, vhtmode_init=1 , bw_cap=(1, 0)
[ 10.599602] 0002:03:00.0: CONSOLE: 000000.159 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 10.610492] 0002:03:00.0: CONSOLE: 000000.170 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 10.622226] PCI: Enabling device 0002:04:00.0 (0140 -> 0142)
[ 10.778025] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.790672] scan for domain_nr 2 and bus 4
[ 10.794807] load nvram for 2
[ 10.797897] nvram len = 2128
[ 10.800886] Halt ARM.
[ 10.803165] Download FW brcm/brcmfmac43602-pcie.bin
[ 10.855278] Download NVRAM brcm/brcmfmac43602-pcie.txt
[ 10.860604] Bring ARM in running state
[ 10.897869] Wait for FW init
[ 10.957836] Shared RAM addr: 0x001e946c
[ 10.961698] Console: base 26eccc, buf 26e8c4, size 1024
[ 10.969525] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 10.974614] brcmfmac: brcmf_pcie_ringbell_v2: RING !
[ 10.980532] 0002:04:00.0: CONSOLE: 604, Failed: 0
[ 10.985816] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43602-pcie for chip BCM43602/1
[ 10.994599] brcmfmac 0002:04:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.clm_blob failed with error -2
[ 11.004914] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 11.016726] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43602/1 wl0: Jun 12 2022 22:08:58 version 7.49.6 (r588839) FWID 01-f458629d
[ 11.031435] 0002:04:00.0: CONSOLE:
[ 11.039832] enabling firmware feature: MONITOR_FMT_RADIOTAP
[ 11.048629] brcmfmac: brcmf_setup_wiphybands: nmode=1, vhtmode=1, vhtmode_init=1 , bw_cap=(0, 7)
[ 11.065737] 0002:04:00.0: CONSOLE: 000000.165 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 11.077051] 0002:04:00.0: CONSOLE: 000000.176 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 11.241646] eth0: mixed HW and IP checksum settings.
[ 12.615580] NET: Registered protocol family 10
[ 12.778732] sit: IPv6 over IPv4 tunneling driver
[ 12.992007] mip6: Mobile IPv6
[ 18.009332] net_ratelimit: 26 callbacks suppressed
[ 18.014152] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 18.022901] ieee80211 phy0: brcmf_fil_iovar_data_get: fil_iovar_data_get was toe_ol
[ 18.054767] 0001:01:00.0: CONSOLE: 000008.145 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 18.065794] brcmfmac: brcmf_config_dongle: power save set to disabled
[ 18.072862] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=2
[ 18.082242] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 18.090876] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 18.099121] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 18.106146] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.112946] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 18.121618] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 18.159844] b53_robo_cpu_port_upd, pdesc[8].cpu=1
[ 18.164626] bcm_robo_config_vlan_fun vid=1, vlan->members=0x1af, vlan->untag=0xaf
[ 18.172213] bcm_robo_config_vlan_fun ports=0 1 2 3 5 7 8t
[ 18.177839] bcm_robo_config_vlan_fun vid=2, vlan->members=0x110, vlan->untag=0x110
[ 18.185525] bcm_robo_config_vlan_fun ports=4 8
[ 18.207944] device br0 entered promiscuous mode
[ 18.308415] device vlan1 entered promiscuous mode
[ 18.313532] device eth0 entered promiscuous mode
[ 18.326746] br0: port 1(vlan1) entered forwarding state
[ 18.332264] br0: port 1(vlan1) entered forwarding state
[ 18.337793] device br0 left promiscuous mode
[ 18.345953] device br0 entered promiscuous mode
[ 18.358835] device br0 left promiscuous mode
[ 18.399060] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 18.407977] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 18.992868] Current Country US, ccode Q2, rev 86
[ 18.997798] Current Country US, ccode Q2, rev 86
[ 19.002787] Current Country US, ccode Q2, rev 86
[ 19.011490] Current Country US, ccode Q2, rev 86
[ 19.023493] Current Country US, ccode Q2, rev 86
[ 19.035970] Current Country US, ccode Q2, rev 86
[ 19.060642] brcmfmac: brcmf_setup_wiphybands: nmode=3, vhtmode=1, vhtmode_init=1 , bw_cap=(0, 7)
[ 20.075202] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 20.086449] ieee80211 phy2: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 262
[ 20.095124] ieee80211 phy2: brcmf_fil_iovar_data_get: fil_iovar_data_get was toe_ol
[ 20.126983] 0002:04:00.0: CONSOLE: 000009.224 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 20.138007] brcmfmac: brcmf_config_dongle: power save set to disabled
[ 20.145095] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 20.154902] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 20.162212] device wlan2 entered promiscuous mode
[ 20.422332] 0002:04:00.0: CONSOLE: 000009.520 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 20.460983] br0: port 2(wlan2) entered forwarding state
[ 20.466270] br0: port 2(wlan2) entered forwarding state
[ 20.471563] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[ 20.538559] brcmfmac: brcmf_setup_wiphybands: nmode=1, vhtmode=0, vhtmode_init=1 , bw_cap=(3, 0)
[ 20.684547] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 20.720568] 0002:03:00.0: CONSOLE: 000010.278 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 20.731608] brcmfmac: brcmf_config_dongle: power save set to disabled
[ 20.738780] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 20.748579] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 20.756304] device wlan1 entered promiscuous mode
[ 20.822037] 0002:03:00.0: CONSOLE: 000010.380 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 20.865925] br0: port 3(wlan1) entered forwarding state
[ 20.871212] br0: port 3(wlan1) entered forwarding state
[ 20.876537] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 20.909074] random: nonblocking pool is initialized
[ 20.948081] brcmfmac: brcmf_setup_wiphybands: nmode=3, vhtmode=1, vhtmode_init=1 , bw_cap=(0, 7)
[ 21.086846] brcmfmac: brcmf_cfg80211_change_iface: brcmf_cfg80211_change_iface bsscfgidx=0, type=3
[ 21.098255] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.106046] device wlan0 entered promiscuous mode
[ 21.171435] 0001:01:00.0: CONSOLE: 000011.264 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 21.262958] 0001:01:00.0: CONSOLE: 000011.302 wl0: wlc_enable_probe_req: state down, deferring setting of host flags
[ 21.273622] br0: port 4(wlan0) entered forwarding state
[ 21.278915] br0: port 4(wlan0) entered forwarding state
[ 21.284265] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.362388] Current Country US, ccode Q2, rev 86
[ 21.367372] Current Country US, ccode Q2, rev 86
[ 21.372276] Current Country US, ccode Q2, rev 86
[ 21.381526] Current Country US, ccode Q2, rev 86
[ 21.393657] Current Country US, ccode Q2, rev 86
[ 21.405711] Current Country US, ccode Q2, rev 86
[ 21.832586] device vlan2 entered promiscuous mode
[ 22.079219] tun: Universal TUN/TAP device driver, 1.6
[ 22.084745] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 27.523036] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 27.955051] net_ratelimit: 72 callbacks suppressed
[ 27.959983] ieee80211 phy1: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 27.968678] ieee80211 phy1: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 27.977185] ieee80211 phy2: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 27.979986] CTF: disabled
[ 27.988676] ieee80211 phy2: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 27.996576] ieee80211 phy0: brcmf_fil_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 28.005224] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 28.495934] device vlan2 left promiscuous mode
[ 33.366845] br0: port 1(vlan1) entered forwarding state
[ 35.485807] br0: port 2(wlan2) entered forwarding state
[ 35.885609] br0: port 3(wlan1) entered forwarding state
[ 36.282353] br0: port 4(wlan0) entered forwarding state
~ # il_cmd_data: Firmware error: BCME_UNSUPPORTED (-23) cmd 263
[ 28.005224] ieee80211 phy0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 28.495934] device vlan2 left promiscuous mode
[ 33.366845] br0: port 1(vlan1) entered forwarding state
[ 35.485807] br0: port 2(wlan2) entered forwarding state
[ 35.885609] br0: port 3(wlan1) entered forwarding state
[ 36.282353] br0: port 4(wlan0) entered forwarding state
~ # 0: brcmf_fil_iovar_data_set: fil_iovar_data_set was arp_ol
[ 28.495934] device vlan2 left promiscuous mode
[ 33.366845] br0: port 1(vlan1) entered forwarding state
[ 35.485807] br0: port 2(wlan2) entered forwarding state
[ 35.885609] br0: port 3(wlan1) entered forwarding state
[ 36.282353] br0: port 4(wlan0) entered forwarding state
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: bump
2024-03-20 21:20 ` bump Hranislav Milenkovic
@ 2024-03-23 19:40 ` Arend van Spriel
2024-03-24 6:05 ` bump Hranislav Milenkovic
0 siblings, 1 reply; 5+ messages in thread
From: Arend van Spriel @ 2024-03-23 19:40 UTC (permalink / raw
To: Hranislav Milenkovic, Sebastian Gottschall; +Cc: brcm80211, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 439 bytes --]
On 3/20/2024 10:20 PM, Hranislav Milenkovic wrote:
> I attached as many info as I could get like hostapd.conf, dmesg, build
> versions/branch but commad you asked for f in brcmfmac43602-pcie.*; do
> strings $f | tail -1; output nothing both on openwrt and ddwrt...
The command should be executed in the directory where the firmware file
reside, eg. /lib/firmware/brcm. Might be they are in a different
location though.
Regards,
Arend
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4219 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: bump
2024-03-23 19:40 ` bump Arend van Spriel
@ 2024-03-24 6:05 ` Hranislav Milenkovic
0 siblings, 0 replies; 5+ messages in thread
From: Hranislav Milenkovic @ 2024-03-24 6:05 UTC (permalink / raw
To: Arend van Spriel; +Cc: Sebastian Gottschall, brcm80211, linux-wireless
Ah, ok... here is the output:
OPENWRT:
[hranislav@toshiba-laptop ~]$ sudo ssh 192.168.1.1
[sudo] password for hranislav:
root@192.168.1.1's password:
BusyBox v1.36.1 (2024-03-22 10:37:01 UTC) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r25604-494c5691c6
-----------------------------------------------------
root@R8000:~# cd /lib/firmware/brcm
root@R8000:/lib/firmware/brcm# for f in brcmfmac43602-pcie.*; do strings $f | tail -1; done
43602a1-roml/pcie-ag-splitrx-fdap-mbss-mfp-wl11k-wl11u-txbf-pktctx-amsdutx-ampduretry-chkd2hdma-proptxstatus-11nprop Version: 7.35.177.56 CRC: 548eccd4 Date: Fri 2015-09-18 03:31:06 PDT Ucode Ver: 986.122 FWID: 01-6cb8e269
root@R8000:/lib/firmware/brcm#
DDWRT:
[hranislav@toshiba-laptop ~]$ mactelnet r8000
Searching for 'r8000'...found
Login: root
Password:
Connecting to 2c:30:33:59:aa:79...done
==========================================================
___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/
DD-WRT v3.0
https://www.dd-wrt.com
==========================================================
BusyBox v1.36.1 (2024-03-21 07:18:48 +06) built-in shell (ash)
~ # cd /lib/firmware/brcm
/lib/firmware/brcm # for f in brcmfmac43602-pcie.*; do strings $f | tail -1; done
43602a1-roml/pcie-ag-splitrx-fdap-mbss-mfp-wnm-osen-wl11k-wl11u-txbf-pktctx-amsdutx-ampduretry-chkd2hdma-proptxstatus-txpwr-authrmf-11nprop-obss-dbwsw-ringer-dmaindex16-bgdfs-stamon-hostpmac-hostmemucode-splitassoc-cca Version: 7.49.6.0 CRC: 17a26fb1 Date: Sun 2022-06-12 22:22:41 +07 FWID 01-f458629d
/lib/firmware/brcm #
Hranislav Milenkovic
+381 (0)65 2026199
Sent with Proton Mail secure email.
On Saturday, March 23rd, 2024 at 8:40 PM, Arend van Spriel <arend.vanspriel@broadcom.com> wrote:
> On 3/20/2024 10:20 PM, Hranislav Milenkovic wrote:
>
> > I attached as many info as I could get like hostapd.conf, dmesg, build
> > versions/branch but commad you asked for f in brcmfmac43602-pcie.*; do
> > strings $f | tail -1; output nothing both on openwrt and ddwrt...
>
>
> The command should be executed in the directory where the firmware file
> reside, eg. /lib/firmware/brcm. Might be they are in a different
> location though.
>
> Regards,
> Arend
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-03-24 6:06 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <H1YMm0UlsCAAuLjY3yG9iqSb0G4tRSHoe0_-bLXMowq8eNCd7eW5Vs_D_PdO4KnriiKO5e5fehpmXmQPtAR9htqHRT5MgFZumadSikTcNWw=@protonmail.com>
2024-03-20 10:41 ` bump Arend van Spriel
2024-03-20 10:51 ` bump Arend van Spriel
2024-03-20 21:20 ` bump Hranislav Milenkovic
2024-03-23 19:40 ` bump Arend van Spriel
2024-03-24 6:05 ` bump Hranislav Milenkovic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.