* [PATCH v6 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation
@ 2020-11-05 6:04 ` Kuninori Morimoto
0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-11-05 6:04 UTC (permalink / raw
To: Rob Herring, Mark Brown; +Cc: alsa-devel, devicetree, Sameer Pujar
Hi Rob, Mark
Cc: Sameer
These are v6 of switch to yaml base Documentation for
audio-graph-card and renesas,rsnd which uses audio-graph-card.
v5 -> v6
- add Acked-by/Reviewed-by on each patch
- remove "audio-graph-card,xxx" property
- remove un-needed if "ok"
v4 -> v5
- move "endpoint" under "port"
v3 -> v4
- fixuped yamllint warnings/errors
v2 -> v3
- fixuped Rob's pointed points
v1 -> v2
- upgrade dt-schema, and fixup errors for [2/2] patch
Kuninori Morimoto (3):
dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation
dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support
.../bindings/sound/audio-graph-card.txt | 337 ------------
.../bindings/sound/audio-graph-card.yaml | 153 ++++++
.../bindings/sound/renesas,rsnd.txt | 520 ------------------
.../bindings/sound/renesas,rsnd.yaml | 451 +++++++++++++++
4 files changed, 604 insertions(+), 857 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation
@ 2020-11-05 6:04 ` Kuninori Morimoto
0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-11-05 6:04 UTC (permalink / raw
To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar
Hi Rob, Mark
Cc: Sameer
These are v6 of switch to yaml base Documentation for
audio-graph-card and renesas,rsnd which uses audio-graph-card.
v5 -> v6
- add Acked-by/Reviewed-by on each patch
- remove "audio-graph-card,xxx" property
- remove un-needed if "ok"
v4 -> v5
- move "endpoint" under "port"
v3 -> v4
- fixuped yamllint warnings/errors
v2 -> v3
- fixuped Rob's pointed points
v1 -> v2
- upgrade dt-schema, and fixup errors for [2/2] patch
Kuninori Morimoto (3):
dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation
dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support
.../bindings/sound/audio-graph-card.txt | 337 ------------
.../bindings/sound/audio-graph-card.yaml | 153 ++++++
.../bindings/sound/renesas,rsnd.txt | 520 ------------------
.../bindings/sound/renesas,rsnd.yaml | 451 +++++++++++++++
4 files changed, 604 insertions(+), 857 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
--
2.25.1
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
2020-11-05 6:04 ` Kuninori Morimoto
@ 2020-11-05 6:04 ` Kuninori Morimoto
-1 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-11-05 6:04 UTC (permalink / raw
To: Rob Herring, Mark Brown; +Cc: alsa-devel, devicetree, Sameer Pujar
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
This patch switches from .txt base to .yaml base Document.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/sound/audio-graph-card.txt | 337 ------------------
.../bindings/sound/audio-graph-card.yaml | 153 ++++++++
2 files changed, 153 insertions(+), 337 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
deleted file mode 100644
index d5f6919a2d69..000000000000
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ /dev/null
@@ -1,337 +0,0 @@
-Audio Graph Card:
-
-Audio Graph Card specifies audio DAI connections of SoC <-> codec.
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
-
-Below are same as Simple-Card.
-
-- label
-- widgets
-- routing
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- mclk-fs
-- hp-det-gpio
-- mic-det-gpio
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Required properties:
-
-- compatible : "audio-graph-card";
-- dais : list of CPU DAI port{s}
-
-Optional properties:
-- pa-gpios: GPIO used to control external amplifier.
-
------------------------
-Example: Single DAI case
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- dais = <&cpu_port>;
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
- audio-codec {
- ...
- port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
- };
-
------------------------
-Example: Multi DAI case
------------------------
-
- sound-card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
-
- dais = <&cpu_port0
- &cpu_port1
- &cpu_port2>;
- };
-
- audio-codec@0 {
- ...
- port {
- codec0_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint0>;
- };
- };
- };
-
- audio-codec@1 {
- ...
- port {
- codec1_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint1>;
- };
- };
- };
-
- audio-codec@2 {
- ...
- port {
- codec2_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint2>;
- };
- };
- };
-
- dai-controller {
- ...
- ports {
- cpu_port0: port@0 {
- cpu_endpoint0: endpoint {
- remote-endpoint = <&codec0_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- cpu_port1: port@1 {
- cpu_endpoint1: endpoint {
- remote-endpoint = <&codec1_endpoint>;
-
- dai-format = "i2s";
- ...
- };
- };
- cpu_port2: port@2 {
- cpu_endpoint2: endpoint {
- remote-endpoint = <&codec2_endpoint>;
-
- dai-format = "i2s";
- ...
- };
- };
- };
- };
-
-
------------------------
-Example: Sampling Rate Conversion
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
- prefix = "codec";
- routing = "codec Playback", "DAI0 Playback",
- "DAI0 Capture", "codec Capture";
- convert-rate = <48000>;
-
- dais = <&cpu_port>;
- };
-
- audio-codec {
- ...
- port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
------------------------
-Example: 2 CPU 1 Codec (Mixing)
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
- routing = "codec Playback", "DAI0 Playback",
- "codec Playback", "DAI1 Playback",
- "DAI0 Capture", "codec Capture";
-
- dais = <&cpu_port>;
- };
-
- audio-codec {
- ...
-
- audio-graph-card,prefix = "codec";
- audio-graph-card,convert-rate = <48000>;
- port {
- reg = <0>;
- codec_endpoint0: endpoint@0 {
- remote-endpoint = <&cpu_endpoint0>;
- };
- codec_endpoint1: endpoint@1 {
- remote-endpoint = <&cpu_endpoint1>;
- };
- };
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint0: endpoint@0 {
- remote-endpoint = <&codec_endpoint0>;
-
- dai-format = "left_j";
- ...
- };
- cpu_endpoint1: endpoint@1 {
- remote-endpoint = <&codec_endpoint1>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
------------------------
-Example: Multi DAI with DPCM
------------------------
-
- CPU0 ------ ak4613
- CPU1 ------ HDMI
- CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */
- CPU3 --/ /* DPCM 3ch/4ch */
- CPU4 --/ /* DPCM 5ch/6ch */
- CPU5 --/ /* DPCM 7ch/8ch */
- CPU6 ------ PCM3168A-c
-
- sound_card: sound {
- compatible = "audio-graph-card";
-
- label = "sound-card";
-
- routing = "pcm3168a Playback", "DAI2 Playback",
- "pcm3168a Playback", "DAI3 Playback",
- "pcm3168a Playback", "DAI4 Playback",
- "pcm3168a Playback", "DAI5 Playback";
-
- dais = <&snd_port0 /* ak4613 */
- &snd_port1 /* HDMI0 */
- &snd_port2 /* pcm3168a playback */
- &snd_port3 /* pcm3168a capture */
- >;
- };
-
- ak4613: codec@10 {
- ...
- port {
- ak4613_endpoint: endpoint {
- remote-endpoint = <&rsnd_endpoint0>;
- };
- };
- };
-
- pcm3168a: audio-codec@44 {
- ...
- audio-graph-card,prefix = "pcm3168a";
- audio-graph-card,convert-channels = <8>; /* TDM Split */
- ports {
- port@0 {
- reg = <0>;
- pcm3168a_endpoint_p1: endpoint@1 {
- remote-endpoint = <&rsnd_endpoint2>;
- ...
- };
- pcm3168a_endpoint_p2: endpoint@2 {
- remote-endpoint = <&rsnd_endpoint3>;
- ...
- };
- pcm3168a_endpoint_p3: endpoint@3 {
- remote-endpoint = <&rsnd_endpoint4>;
- ...
- };
- pcm3168a_endpoint_p4: endpoint@4 {
- remote-endpoint = <&rsnd_endpoint5>;
- ...
- };
- };
- port@1 {
- reg = <1>;
- pcm3168a_endpoint_c: endpoint {
- remote-endpoint = <&rsnd_endpoint6>;
- ...
- };
- };
- };
- };
-
- &sound {
- ports {
- snd_port0: port@0 {
- rsnd_endpoint0: endpoint {
- remote-endpoint = <&ak4613_endpoint>;
- ...
- };
- };
- snd_port1: port@1 {
- rsnd_endpoint1: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
- ...
- };
- };
- snd_port2: port@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- rsnd_endpoint2: endpoint@2 {
- remote-endpoint = <&pcm3168a_endpoint_p1>;
- ...
- };
- rsnd_endpoint3: endpoint@3 {
- remote-endpoint = <&pcm3168a_endpoint_p2>;
- ...
- };
- rsnd_endpoint4: endpoint@4 {
- remote-endpoint = <&pcm3168a_endpoint_p3>;
- ...
- };
- rsnd_endpoint5: endpoint@5 {
- remote-endpoint = <&pcm3168a_endpoint_p4>;
- ...
- };
- };
- snd_port3: port@6 {
- rsnd_endpoint6: endpoint {
- remote-endpoint = <&pcm3168a_endpoint_c>;
- ...
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
new file mode 100644
index 000000000000..2329aeb91db7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card Driver Device Tree Bindings
+
+maintainers:
+ - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+ compatible:
+ enum:
+ - audio-graph-card
+ - audio-graph-scu-card
+
+ dais:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ label:
+ maxItems: 1
+ prefix:
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ routing:
+ description: |
+ A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's source.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ widgets:
+ description: User specified audio sound widgets.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ pa-gpios:
+ maxItems: 1
+ hp-det-gpio:
+ maxItems: 1
+ mic-det-gpio:
+ maxItems: 1
+
+ port:
+ description: single OF-Graph subnode
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+ prefix:
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ patternProperties:
+ "^endpoint(@[0-9a-f]+)?":
+ type: object
+ properties:
+ remote-endpoint:
+ maxItems: 1
+ mclk-fs:
+ description: |
+ Multiplication factor between stream rate and codec mclk.
+ When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ frame-inversion:
+ description: dai-link uses frame clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ bitclock-inversion:
+ description: dai-link uses bit clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ frame-master:
+ description: Indicates dai-link frame master.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ bitclock-master:
+ description: Indicates dai-link bit clock master
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ dai-format:
+ description: audio format.
+ items:
+ enum:
+ - i2s
+ - right_j
+ - left_j
+ - dsp_a
+ - dsp_b
+ - ac97
+ - pdm
+ - msb
+ - lsb
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ required:
+ - remote-endpoint
+
+ ports:
+ description: multi OF-Graph subnode
+ type: object
+ patternProperties:
+ "^port(@[0-9a-f]+)?":
+ $ref: "#/properties/port"
+
+required:
+ - compatible
+ - dais
+
+additionalProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "audio-graph-card";
+
+ dais = <&cpu_port_a>;
+ };
+
+ cpu {
+ /*
+ * dai-controller own settings
+ */
+
+ port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ dai-format = "left_j";
+ };
+ };
+ };
+
+ codec {
+ /*
+ * codec own settings
+ */
+
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 1/3] dt-bindings: ASoC: audio-graph-card: switch to yaml base Documentation
@ 2020-11-05 6:04 ` Kuninori Morimoto
0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-11-05 6:04 UTC (permalink / raw
To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
This patch switches from .txt base to .yaml base Document.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
.../bindings/sound/audio-graph-card.txt | 337 ------------------
.../bindings/sound/audio-graph-card.yaml | 153 ++++++++
2 files changed, 153 insertions(+), 337 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt
create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
deleted file mode 100644
index d5f6919a2d69..000000000000
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ /dev/null
@@ -1,337 +0,0 @@
-Audio Graph Card:
-
-Audio Graph Card specifies audio DAI connections of SoC <-> codec.
-It is based on common bindings for device graphs.
-see ${LINUX}/Documentation/devicetree/bindings/graph.txt
-
-Basically, Audio Graph Card property is same as Simple Card.
-see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.yaml
-
-Below are same as Simple-Card.
-
-- label
-- widgets
-- routing
-- dai-format
-- frame-master
-- bitclock-master
-- bitclock-inversion
-- frame-inversion
-- mclk-fs
-- hp-det-gpio
-- mic-det-gpio
-- dai-tdm-slot-num
-- dai-tdm-slot-width
-- clocks / system-clock-frequency
-
-Required properties:
-
-- compatible : "audio-graph-card";
-- dais : list of CPU DAI port{s}
-
-Optional properties:
-- pa-gpios: GPIO used to control external amplifier.
-
------------------------
-Example: Single DAI case
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- dais = <&cpu_port>;
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
- audio-codec {
- ...
- port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
- };
-
------------------------
-Example: Multi DAI case
------------------------
-
- sound-card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
-
- dais = <&cpu_port0
- &cpu_port1
- &cpu_port2>;
- };
-
- audio-codec@0 {
- ...
- port {
- codec0_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint0>;
- };
- };
- };
-
- audio-codec@1 {
- ...
- port {
- codec1_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint1>;
- };
- };
- };
-
- audio-codec@2 {
- ...
- port {
- codec2_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint2>;
- };
- };
- };
-
- dai-controller {
- ...
- ports {
- cpu_port0: port@0 {
- cpu_endpoint0: endpoint {
- remote-endpoint = <&codec0_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- cpu_port1: port@1 {
- cpu_endpoint1: endpoint {
- remote-endpoint = <&codec1_endpoint>;
-
- dai-format = "i2s";
- ...
- };
- };
- cpu_port2: port@2 {
- cpu_endpoint2: endpoint {
- remote-endpoint = <&codec2_endpoint>;
-
- dai-format = "i2s";
- ...
- };
- };
- };
- };
-
-
------------------------
-Example: Sampling Rate Conversion
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
- prefix = "codec";
- routing = "codec Playback", "DAI0 Playback",
- "DAI0 Capture", "codec Capture";
- convert-rate = <48000>;
-
- dais = <&cpu_port>;
- };
-
- audio-codec {
- ...
- port {
- codec_endpoint: endpoint {
- remote-endpoint = <&cpu_endpoint>;
- };
- };
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint: endpoint {
- remote-endpoint = <&codec_endpoint>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
------------------------
-Example: 2 CPU 1 Codec (Mixing)
------------------------
-
- sound_card {
- compatible = "audio-graph-card";
-
- label = "sound-card";
- routing = "codec Playback", "DAI0 Playback",
- "codec Playback", "DAI1 Playback",
- "DAI0 Capture", "codec Capture";
-
- dais = <&cpu_port>;
- };
-
- audio-codec {
- ...
-
- audio-graph-card,prefix = "codec";
- audio-graph-card,convert-rate = <48000>;
- port {
- reg = <0>;
- codec_endpoint0: endpoint@0 {
- remote-endpoint = <&cpu_endpoint0>;
- };
- codec_endpoint1: endpoint@1 {
- remote-endpoint = <&cpu_endpoint1>;
- };
- };
- };
-
- dai-controller {
- ...
- cpu_port: port {
- cpu_endpoint0: endpoint@0 {
- remote-endpoint = <&codec_endpoint0>;
-
- dai-format = "left_j";
- ...
- };
- cpu_endpoint1: endpoint@1 {
- remote-endpoint = <&codec_endpoint1>;
-
- dai-format = "left_j";
- ...
- };
- };
- };
-
------------------------
-Example: Multi DAI with DPCM
------------------------
-
- CPU0 ------ ak4613
- CPU1 ------ HDMI
- CPU2 ------ PCM3168A-p /* DPCM 1ch/2ch */
- CPU3 --/ /* DPCM 3ch/4ch */
- CPU4 --/ /* DPCM 5ch/6ch */
- CPU5 --/ /* DPCM 7ch/8ch */
- CPU6 ------ PCM3168A-c
-
- sound_card: sound {
- compatible = "audio-graph-card";
-
- label = "sound-card";
-
- routing = "pcm3168a Playback", "DAI2 Playback",
- "pcm3168a Playback", "DAI3 Playback",
- "pcm3168a Playback", "DAI4 Playback",
- "pcm3168a Playback", "DAI5 Playback";
-
- dais = <&snd_port0 /* ak4613 */
- &snd_port1 /* HDMI0 */
- &snd_port2 /* pcm3168a playback */
- &snd_port3 /* pcm3168a capture */
- >;
- };
-
- ak4613: codec@10 {
- ...
- port {
- ak4613_endpoint: endpoint {
- remote-endpoint = <&rsnd_endpoint0>;
- };
- };
- };
-
- pcm3168a: audio-codec@44 {
- ...
- audio-graph-card,prefix = "pcm3168a";
- audio-graph-card,convert-channels = <8>; /* TDM Split */
- ports {
- port@0 {
- reg = <0>;
- pcm3168a_endpoint_p1: endpoint@1 {
- remote-endpoint = <&rsnd_endpoint2>;
- ...
- };
- pcm3168a_endpoint_p2: endpoint@2 {
- remote-endpoint = <&rsnd_endpoint3>;
- ...
- };
- pcm3168a_endpoint_p3: endpoint@3 {
- remote-endpoint = <&rsnd_endpoint4>;
- ...
- };
- pcm3168a_endpoint_p4: endpoint@4 {
- remote-endpoint = <&rsnd_endpoint5>;
- ...
- };
- };
- port@1 {
- reg = <1>;
- pcm3168a_endpoint_c: endpoint {
- remote-endpoint = <&rsnd_endpoint6>;
- ...
- };
- };
- };
- };
-
- &sound {
- ports {
- snd_port0: port@0 {
- rsnd_endpoint0: endpoint {
- remote-endpoint = <&ak4613_endpoint>;
- ...
- };
- };
- snd_port1: port@1 {
- rsnd_endpoint1: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
- ...
- };
- };
- snd_port2: port@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- rsnd_endpoint2: endpoint@2 {
- remote-endpoint = <&pcm3168a_endpoint_p1>;
- ...
- };
- rsnd_endpoint3: endpoint@3 {
- remote-endpoint = <&pcm3168a_endpoint_p2>;
- ...
- };
- rsnd_endpoint4: endpoint@4 {
- remote-endpoint = <&pcm3168a_endpoint_p3>;
- ...
- };
- rsnd_endpoint5: endpoint@5 {
- remote-endpoint = <&pcm3168a_endpoint_p4>;
- ...
- };
- };
- snd_port3: port@6 {
- rsnd_endpoint6: endpoint {
- remote-endpoint = <&pcm3168a_endpoint_c>;
- ...
- };
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
new file mode 100644
index 000000000000..2329aeb91db7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/audio-graph-card.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Audio Graph Card Driver Device Tree Bindings
+
+maintainers:
+ - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+ compatible:
+ enum:
+ - audio-graph-card
+ - audio-graph-scu-card
+
+ dais:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ label:
+ maxItems: 1
+ prefix:
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ routing:
+ description: |
+ A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's source.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ widgets:
+ description: User specified audio sound widgets.
+ $ref: /schemas/types.yaml#/definitions/non-unique-string-array
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ pa-gpios:
+ maxItems: 1
+ hp-det-gpio:
+ maxItems: 1
+ mic-det-gpio:
+ maxItems: 1
+
+ port:
+ description: single OF-Graph subnode
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+ prefix:
+ description: "device name prefix"
+ $ref: /schemas/types.yaml#/definitions/string
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ patternProperties:
+ "^endpoint(@[0-9a-f]+)?":
+ type: object
+ properties:
+ remote-endpoint:
+ maxItems: 1
+ mclk-fs:
+ description: |
+ Multiplication factor between stream rate and codec mclk.
+ When defined, mclk-fs property defined in dai-link sub nodes are ignored.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ frame-inversion:
+ description: dai-link uses frame clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ bitclock-inversion:
+ description: dai-link uses bit clock inversion
+ $ref: /schemas/types.yaml#/definitions/flag
+ frame-master:
+ description: Indicates dai-link frame master.
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ bitclock-master:
+ description: Indicates dai-link bit clock master
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ maxItems: 1
+ dai-format:
+ description: audio format.
+ items:
+ enum:
+ - i2s
+ - right_j
+ - left_j
+ - dsp_a
+ - dsp_b
+ - ac97
+ - pdm
+ - msb
+ - lsb
+ convert-rate:
+ description: CPU to Codec rate convert.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ convert-channels:
+ description: CPU to Codec rate channels.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ required:
+ - remote-endpoint
+
+ ports:
+ description: multi OF-Graph subnode
+ type: object
+ patternProperties:
+ "^port(@[0-9a-f]+)?":
+ $ref: "#/properties/port"
+
+required:
+ - compatible
+ - dais
+
+additionalProperties: false
+
+examples:
+ - |
+ sound {
+ compatible = "audio-graph-card";
+
+ dais = <&cpu_port_a>;
+ };
+
+ cpu {
+ /*
+ * dai-controller own settings
+ */
+
+ port {
+ cpu_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+ dai-format = "left_j";
+ };
+ };
+ };
+
+ codec {
+ /*
+ * codec own settings
+ */
+
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&cpu_endpoint>;
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 2/3] dt-bindings: ASoC: renesas,rsnd: switch to yaml base Documentation
2020-11-05 6:04 ` Kuninori Morimoto
@ 2020-11-05 6:05 ` Kuninori Morimoto
-1 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-11-05 6:05 UTC (permalink / raw
To: Rob Herring, Mark Brown; +Cc: alsa-devel, devicetree, Sameer Pujar
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
This patch switches from .txt base to .yaml base Document.
It is still keeping detail explanations at .txt
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
.../bindings/sound/renesas,rsnd.txt | 520 ------------------
.../bindings/sound/renesas,rsnd.yaml | 450 +++++++++++++++
2 files changed, 450 insertions(+), 520 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index b39743d3f7c4..b731f16aea84 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -253,523 +253,3 @@ This is example of TDM 6ch.
Driver can automatically switches TDM <-> stereo mode in this case.
see "Example: simple sound card for TDM"
-
-=============================================
-Required properties:
-=============================================
-
-- compatible : "renesas,rcar_sound-<soctype>", fallbacks
- "renesas,rcar_sound-gen1" if generation1, and
- "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
- "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
- Examples with soctypes are:
- - "renesas,rcar_sound-r8a7742" (RZ/G1H)
- - "renesas,rcar_sound-r8a7743" (RZ/G1M)
- - "renesas,rcar_sound-r8a7744" (RZ/G1N)
- - "renesas,rcar_sound-r8a7745" (RZ/G1E)
- - "renesas,rcar_sound-r8a77470" (RZ/G1C)
- - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
- - "renesas,rcar_sound-r8a774b1" (RZ/G2N)
- - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
- - "renesas,rcar_sound-r8a774e1" (RZ/G2H)
- - "renesas,rcar_sound-r8a7778" (R-Car M1A)
- - "renesas,rcar_sound-r8a7779" (R-Car H1)
- - "renesas,rcar_sound-r8a7790" (R-Car H2)
- - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
- - "renesas,rcar_sound-r8a7793" (R-Car M2-N)
- - "renesas,rcar_sound-r8a7794" (R-Car E2)
- - "renesas,rcar_sound-r8a7795" (R-Car H3)
- - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
- - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
- - "renesas,rcar_sound-r8a77990" (R-Car E3)
- - "renesas,rcar_sound-r8a77995" (R-Car D3)
-- reg : Should contain the register physical address.
- required register is
- SRU/ADG/SSI if generation1
- SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
- Select extended AUDIO-DMAC-periperi address if SoC has it,
- otherwise select normal AUDIO-DMAC-periperi address.
-- reg-names : Should contain the register names.
- scu/adg/ssi if generation1
- scu/adg/ssiu/ssi/audmapp if generation2/generation3
-- rcar_sound,ssi : Should contain SSI feature.
- The number of SSI subnode should be same as HW.
- see below for detail.
-- rcar_sound,ssiu : Should contain SSIU feature.
- The number of SSIU subnode should be same as HW.
- see below for detail.
-- rcar_sound,src : Should contain SRC feature.
- The number of SRC subnode should be same as HW.
- see below for detail.
-- rcar_sound,ctu : Should contain CTU feature.
- The number of CTU subnode should be same as HW.
- see below for detail.
-- rcar_sound,mix : Should contain MIX feature.
- The number of MIX subnode should be same as HW.
- see below for detail.
-- rcar_sound,dvc : Should contain DVC feature.
- The number of DVC subnode should be same as HW.
- see below for detail.
-- rcar_sound,dai : DAI contents.
- The number of DAI subnode should be same as HW.
- see below for detail.
-- #sound-dai-cells : it must be 0 if your system is using single DAI
- it must be 1 if your system is using multi DAI
-- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
-- clock-names : List of necessary clock names.
- "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
- "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
-
-Optional properties:
-- #clock-cells : it must be 0 if your system has audio_clkout
- it must be 1 if your system has audio_clkout0/1/2/3
-- clock-frequency : for all audio_clkout0/1/2/3
-- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn
- is asynchronizes with lr-clock.
-- resets : References to SSI resets.
-- reset-names : List of valid reset names.
- "ssi-all", "ssi.X"
-
-SSI subnode properties:
-- interrupts : Should contain SSI interrupt for PIO transfer
-- shared-pin : if shared clock pin
-- pio-transfer : use PIO transfer mode
-- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case
-- dma : Should contain Audio DMAC entry
-- dma-names : SSI case "rx" (=playback), "tx" (=capture)
- Deprecated: see SSIU subnode properties
- SSIU case "rxu" (=playback), "txu" (=capture)
-
-SSIU subnode properties:
-- dma : Should contain Audio DMAC entry
-- dma-names : "rx" (=playback), "tx" (=capture)
-
-SRC subnode properties:
-- dma : Should contain Audio DMAC entry
-- dma-names : "rx" (=playback), "tx" (=capture)
-
-DVC subnode properties:
-- dma : Should contain Audio DMAC entry
-- dma-names : "tx" (=playback/capture)
-
-DAI subnode properties:
-- playback : list of playback modules
-- capture : list of capture modules
-
-
-=============================================
-Example:
-=============================================
-
-rcar_sound: sound@ec500000 {
- #sound-dai-cells = <1>;
- compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x1280>, /* SSI */
- <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
- reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
- clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
- <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
- <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
- <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
- <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
- <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
- <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
- <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
- clock-names = "ssi-all",
- "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
- "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
- "src.9", "src.8", "src.7", "src.6", "src.5",
- "src.4", "src.3", "src.2", "src.1", "src.0",
- "dvc.0", "dvc.1",
- "clk_a", "clk_b", "clk_c", "clk_i";
-
- rcar_sound,dvc {
- dvc0: dvc-0 {
- dmas = <&audma0 0xbc>;
- dma-names = "tx";
- };
- dvc1: dvc-1 {
- dmas = <&audma0 0xbe>;
- dma-names = "tx";
- };
- };
-
- rcar_sound,mix {
- mix0: mix-0 { };
- mix1: mix-1 { };
- };
-
- rcar_sound,ctu {
- ctu00: ctu-0 { };
- ctu01: ctu-1 { };
- ctu02: ctu-2 { };
- ctu03: ctu-3 { };
- ctu10: ctu-4 { };
- ctu11: ctu-5 { };
- ctu12: ctu-6 { };
- ctu13: ctu-7 { };
- };
-
- rcar_sound,src {
- src0: src-0 {
- interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x85>, <&audma1 0x9a>;
- dma-names = "rx", "tx";
- };
- src1: src-1 {
- interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x87>, <&audma1 0x9c>;
- dma-names = "rx", "tx";
- };
- src2: src-2 {
- interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x89>, <&audma1 0x9e>;
- dma-names = "rx", "tx";
- };
- src3: src-3 {
- interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x8b>, <&audma1 0xa0>;
- dma-names = "rx", "tx";
- };
- src4: src-4 {
- interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x8d>, <&audma1 0xb0>;
- dma-names = "rx", "tx";
- };
- src5: src-5 {
- interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x8f>, <&audma1 0xb2>;
- dma-names = "rx", "tx";
- };
- src6: src-6 {
- interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x91>, <&audma1 0xb4>;
- dma-names = "rx", "tx";
- };
- src7: src-7 {
- interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x93>, <&audma1 0xb6>;
- dma-names = "rx", "tx";
- };
- src8: src-8 {
- interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x95>, <&audma1 0xb8>;
- dma-names = "rx", "tx";
- };
- src9: src-9 {
- interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x97>, <&audma1 0xba>;
- dma-names = "rx", "tx";
- };
- };
-
- rcar_sound,ssiu {
- ssiu00: ssiu-0 {
- dmas = <&audma0 0x15>, <&audma1 0x16>;
- dma-names = "rx", "tx";
- };
- ssiu01: ssiu-1 {
- dmas = <&audma0 0x35>, <&audma1 0x36>;
- dma-names = "rx", "tx";
- };
-
- ...
-
- ssiu95: ssiu-49 {
- dmas = <&audma0 0xA5>, <&audma1 0xA6>;
- dma-names = "rx", "tx";
- };
- ssiu96: ssiu-50 {
- dmas = <&audma0 0xA7>, <&audma1 0xA8>;
- dma-names = "rx", "tx";
- };
- ssiu97: ssiu-51 {
- dmas = <&audma0 0xA9>, <&audma1 0xAA>;
- dma-names = "rx", "tx";
- };
- };
-
- rcar_sound,ssi {
- ssi0: ssi-0 {
- interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x01>, <&audma1 0x02>;
- dma-names = "rx", "tx";
- };
- ssi1: ssi-1 {
- interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x03>, <&audma1 0x04>;
- dma-names = "rx", "tx";
- };
-
- ...
-
- ssi8: ssi-8 {
- interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x11>, <&audma1 0x12>;
- dma-names = "rx", "tx";
- };
- ssi9: ssi-9 {
- interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x13>, <&audma1 0x14>;
- dma-names = "rx", "tx";
- };
- };
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi5 &src5>;
- capture = <&ssi6>;
- };
- dai1 {
- playback = <&ssi3>;
- };
- dai2 {
- capture = <&ssi4>;
- };
- dai3 {
- playback = <&ssi7>;
- };
- dai4 {
- capture = <&ssi8>;
- };
- };
-};
-
-=============================================
-Example: simple sound card
-=============================================
-
- rsnd_ak4643: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4643>;
- clocks = <&audio_clock>;
- };
- };
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src2 &dvc0>;
- capture = <&ssi1 &src3 &dvc1>;
- };
- };
-};
-
-&ssi1 {
- shared-pin;
-};
-
-=============================================
-Example: simple sound card for Asynchronous mode
-=============================================
-
-sound {
- compatible = "simple-scu-audio-card";
- ...
- /*
- * SRC Asynchronous mode setting
- * Playback:
- * All input data will be converted to 48kHz
- * Capture:
- * Inputed 48kHz data will be converted to
- * system specified Hz
- */
- simple-audio-card,convert-rate = <48000>;
- ...
- simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
- simple-audio-card,codec {
- ...
- };
-};
-
-=============================================
-Example: simple sound card for channel convert
-=============================================
-
-sound {
- compatible = "simple-scu-audio-card";
- ...
- /*
- * CTU setting
- * All input data will be converted to 2ch
- * as output data
- */
- simple-audio-card,convert-channels = <2>;
- ...
- simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
- simple-audio-card,codec {
- ...
- };
-};
-
-=============================================
-Example: simple sound card for MIXer
-=============================================
-
-sound {
- compatible = "simple-scu-audio-card";
- ...
- simple-audio-card,cpu@0 {
- sound-dai = <&rcar_sound 0>;
- };
- simple-audio-card,cpu@1 {
- sound-dai = <&rcar_sound 1>;
- };
- simple-audio-card,codec {
- ...
- };
-};
-
-&rcar_sound {
- ...
- rcar_sound,dai {
- dai0 {
- playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
- };
- dai1 {
- playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
- };
- };
-};
-
-=============================================
-Example: simple sound card for TDM
-=============================================
-
-rsnd_tdm: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- dai-tdm-slot-num = <6>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&xxx>;
- };
-};
-
-=============================================
-Example: simple sound card for TDM Split
-=============================================
-
-sound_card: sound {
- compatible = "audio-graph-scu-card";
- prefix = "xxxx";
- routing = "xxxx Playback", "DAI0 Playback",
- "xxxx Playback", "DAI1 Playback",
- "xxxx Playback", "DAI2 Playback",
- "xxxx Playback", "DAI3 Playback";
- convert-channels = <8>; /* TDM Split */
-
- dais = <&rsnd_port0 /* playback ch1/ch2 */
- &rsnd_port1 /* playback ch3/ch4 */
- &rsnd_port2 /* playback ch5/ch6 */
- &rsnd_port3 /* playback ch7/ch8 */
- >;
-};
-
-audio-codec {
- ...
- port {
- codec_0: endpoint@1 {
- remote-endpoint = <&rsnd_ep0>;
- };
- codec_1: endpoint@2 {
- remote-endpoint = <&rsnd_ep1>;
- };
- codec_2: endpoint@3 {
- remote-endpoint = <&rsnd_ep2>;
- };
- codec_3: endpoint@4 {
- remote-endpoint = <&rsnd_ep3>;
- };
- };
-};
-
-&rcar_sound {
- ...
- ports {
- rsnd_port0: port@0 {
- rsnd_ep0: endpoint {
- remote-endpoint = <&codec_0>;
- ...
- playback = <&ssiu30 &ssi3>;
- };
- };
- rsnd_port1: port@1 {
- rsnd_ep1: endpoint {
- remote-endpoint = <&codec_1>;
- ...
- playback = <&ssiu31 &ssi3>;
- };
- };
- rsnd_port2: port@2 {
- rsnd_ep2: endpoint {
- remote-endpoint = <&codec_2>;
- ...
- playback = <&ssiu32 &ssi3>;
- };
- };
- rsnd_port3: port@3 {
- rsnd_ep3: endpoint {
- remote-endpoint = <&codec_3>;
- ...
- playback = <&ssiu33 &ssi3>;
- };
- };
- };
-};
-
-=============================================
-Example: simple sound card for Multi channel
-=============================================
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
new file mode 100644
index 000000000000..ae41370f952c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -0,0 +1,450 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Sound Driver Device Tree Bindings
+
+maintainers:
+ - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+
+ compatible:
+ oneOf:
+ # for Gen1 SoC
+ - items:
+ - enum:
+ - renesas,rcar_sound-r8a7778 # R-Car M1A
+ - renesas,rcar_sound-r8a7779 # R-Car H1
+ - enum:
+ - renesas,rcar_sound-gen1
+ # for Gen2 SoC
+ - items:
+ - enum:
+ - renesas,rcar_sound-r8a7742 # RZ/G1H
+ - renesas,rcar_sound-r8a7743 # RZ/G1M
+ - renesas,rcar_sound-r8a7744 # RZ/G1N
+ - renesas,rcar_sound-r8a7745 # RZ/G1E
+ - renesas,rcar_sound-r8a77470 # RZ/G1C
+ - renesas,rcar_sound-r8a7790 # R-Car H2
+ - renesas,rcar_sound-r8a7791 # R-Car M2-W
+ - renesas,rcar_sound-r8a7793 # R-Car M2-N
+ - renesas,rcar_sound-r8a7794 # R-Car E2
+ - enum:
+ - renesas,rcar_sound-gen2
+ # for Gen3 SoC
+ - items:
+ - enum:
+ - renesas,rcar_sound-r8a774a1 # RZ/G2M
+ - renesas,rcar_sound-r8a774b1 # RZ/G2N
+ - renesas,rcar_sound-r8a774c0 # RZ/G2E
+ - renesas,rcar_sound-r8a774e1 # RZ/G2H
+ - renesas,rcar_sound-r8a7795 # R-Car H3
+ - renesas,rcar_sound-r8a7796 # R-Car M3-W
+ - renesas,rcar_sound-r8a77965 # R-Car M3-N
+ - renesas,rcar_sound-r8a77990 # R-Car E3
+ - renesas,rcar_sound-r8a77995 # R-Car D3
+ - enum:
+ - renesas,rcar_sound-gen3
+ # for Generic
+ - items:
+ - enum:
+ - renesas,rcar_sound-gen1
+ - renesas,rcar_sound-gen2
+ - renesas,rcar_sound-gen3
+
+ reg:
+ minItems: 1
+ maxItems: 5
+
+ reg-names:
+ minItems: 1
+ maxItems: 5
+
+ "#sound-dai-cells":
+ description: |
+ it must be 0 if your system is using single DAI
+ it must be 1 if your system is using multi DAIs
+ enum: [0, 1]
+
+ "#clock-cells":
+ description: |
+ it must be 0 if your system has audio_clkout
+ it must be 1 if your system has audio_clkout0/1/2/3
+ enum: [0, 1]
+
+ clock-frequency:
+ description: for audio_clkout0/1/2/3
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ clkout-lr-asynchronous:
+ description: audio_clkoutn is asynchronizes with lr-clock.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ power-domains: true
+
+ resets:
+ maxItems: 11
+
+ reset-names:
+ maxItems: 11
+
+ clocks:
+ description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
+ minItems: 1
+ maxItems: 31
+
+ clock-names:
+ description: List of necessary clock names.
+ minItems: 1
+ maxItems: 31
+ items:
+ oneOf:
+ - const: ssi-all
+ - pattern: '^ssi\.[0-9]$'
+ - pattern: '^src\.[0-9]$'
+ - pattern: '^mix\.[0-1]$'
+ - pattern: '^ctu\.[0-1]$'
+ - pattern: '^dvc\.[0-1]$'
+ - pattern: '^clk_(a|b|c|i)$'
+
+ port:
+ description: OF-Graph subnode
+ $ref: "audio-graph-card.yaml#/properties/port"
+
+ ports:
+ description: multi OF-Graph subnode
+ $ref: "audio-graph-card.yaml#/properties/ports"
+
+# use patternProperties to avoid naming "xxx,yyy" issue
+patternProperties:
+ "^rcar_sound,dvc$":
+ description: DVC subnode.
+ type: object
+ patternProperties:
+ "^dvc-[0-1]$":
+ type: object
+ properties:
+ dmas:
+ maxItems: 1
+ dma-names:
+ const: "tx"
+ required:
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ "^rcar_sound,mix$":
+ description: MIX subnode.
+ type: object
+ patternProperties:
+ "^mix-[0-1]$":
+ type: object
+ # no properties
+ additionalProperties: false
+
+ "^rcar_sound,ctu$":
+ description: CTU subnode.
+ type: object
+ patternProperties:
+ "^ctu-[0-7]$":
+ type: object
+ # no properties
+ additionalProperties: false
+
+ "^rcar_sound,src$":
+ description: SRC subnode.
+ type: object
+ patternProperties:
+ "^src-[0-9]$":
+ type: object
+ properties:
+ interrupts:
+ maxItems: 1
+ dmas:
+ maxItems: 2
+ dma-names:
+ allOf:
+ - items:
+ enum:
+ - tx
+ - rx
+ required:
+ - interrupts
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ "^rcar_sound,ssiu$":
+ description: SSIU subnode.
+ type: object
+ patternProperties:
+ "^ssiu-[0-9]+$":
+ type: object
+ properties:
+ dmas:
+ maxItems: 2
+ dma-names:
+ allOf:
+ - items:
+ enum:
+ - tx
+ - rx
+ required:
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ "^rcar_sound,ssi$":
+ description: SSI subnode.
+ type: object
+ patternProperties:
+ "^ssi-[0-9]$":
+ type: object
+ properties:
+ interrupts:
+ maxItems: 1
+ dmas:
+ minItems: 2
+ maxItems: 4
+ dma-names:
+ allOf:
+ - items:
+ enum:
+ - tx
+ - rx
+ - txu # if no ssiu node
+ - rxu # if no ssiu node
+
+ shared-pin:
+ description: shared clock pin
+ $ref: /schemas/types.yaml#/definitions/flag
+ pio-transfer:
+ description: PIO transfer mode
+ $ref: /schemas/types.yaml#/definitions/flag
+ no-busif:
+ description: BUSIF is not used when [mem -> SSI] via DMA case
+ $ref: /schemas/types.yaml#/definitions/flag
+ required:
+ - interrupts
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ # For DAI base
+ "^rcar_sound,dai$":
+ description: DAI subnode.
+ type: object
+ patternProperties:
+ "^dai([0-9]+)?$":
+ type: object
+ properties:
+ playback:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ capture:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ anyOf:
+ - required:
+ - playback
+ - required:
+ - capture
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - "#sound-dai-cells"
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,rcar_sound-gen1
+ then:
+ properties:
+ reg:
+ maxItems: 3
+ reg-names:
+ maxItems: 3
+ items:
+ enum:
+ - scu
+ - ssi
+ - adg
+ else:
+ properties:
+ reg:
+ maxItems: 5
+ reg-names:
+ maxItems: 5
+ items:
+ enum:
+ - scu
+ - adg
+ - ssiu
+ - ssi
+ - audmapp
+
+additionalProperties: false
+
+examples:
+ - |
+ rcar_sound: sound@ec500000 {
+ #sound-dai-cells = <1>;
+ compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
+ reg = <0xec500000 0x1000>, /* SCU */
+ <0xec5a0000 0x100>, /* ADG */
+ <0xec540000 0x1000>, /* SSIU */
+ <0xec541000 0x1280>, /* SSI */
+ <0xec740000 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&mstp10_clks 1005>, /* SSI-ALL */
+ <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */
+ <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */
+ <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */
+ <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */
+ <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */
+ <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */
+ <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */
+ <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */
+ <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */
+ <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */
+ <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* MIX1, MIX0 */
+ <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CTU1, CTU0 */
+ <&mstp10_clks 1019>, <&mstp10_clks 1018>, /* DVC0, DVC1 */
+ <&audio_clk_a>, <&audio_clk_b>, /* CLKA, CLKB */
+ <&audio_clk_c>, <&audio_clk_i>; /* CLKC, CLKI */
+
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8",
+ "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4",
+ "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8",
+ "src.7", "src.6",
+ "src.5", "src.4",
+ "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b",
+ "clk_c", "clk_i";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ status = "disabled";
+ };
+ src1: src-1 {
+ interrupts = <0 353 0>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ /* skip after src-2 */
+ };
+
+ rcar_sound,ssiu {
+ ssiu00: ssiu-0 {
+ dmas = <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx";
+ };
+ ssiu01: ssiu-1 {
+ dmas = <&audma0 0x35>, <&audma1 0x36>;
+ dma-names = "rx", "tx";
+ };
+ /* skip after ssiu-2 */
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <0 370 1>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>;
+ dma-names = "rx", "tx";
+ };
+ ssi1: ssi-1 {
+ interrupts = <0 371 1>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>;
+ dma-names = "rx", "tx";
+ };
+ /* skip other ssi-2 */
+ };
+
+ /* DAI base */
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi5 &src5>;
+ capture = <&ssi6>;
+ };
+ dai1 {
+ playback = <&ssi3>;
+ };
+ dai2 {
+ capture = <&ssi4>;
+ };
+ dai3 {
+ playback = <&ssi7>;
+ };
+ dai4 {
+ capture = <&ssi8>;
+ };
+ };
+
+ /* assume audio-graph */
+ port {
+ rsnd_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_endpoint0>;
+ frame-master = <&rsnd_endpoint0>;
+
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+ };
+
+
+ /* assume audio-graph */
+ codec {
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint>;
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 2/3] dt-bindings: ASoC: renesas, rsnd: switch to yaml base Documentation
@ 2020-11-05 6:05 ` Kuninori Morimoto
0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-11-05 6:05 UTC (permalink / raw
To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
This patch switches from .txt base to .yaml base Document.
It is still keeping detail explanations at .txt
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
.../bindings/sound/renesas,rsnd.txt | 520 ------------------
.../bindings/sound/renesas,rsnd.yaml | 450 +++++++++++++++
2 files changed, 450 insertions(+), 520 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index b39743d3f7c4..b731f16aea84 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -253,523 +253,3 @@ This is example of TDM 6ch.
Driver can automatically switches TDM <-> stereo mode in this case.
see "Example: simple sound card for TDM"
-
-=============================================
-Required properties:
-=============================================
-
-- compatible : "renesas,rcar_sound-<soctype>", fallbacks
- "renesas,rcar_sound-gen1" if generation1, and
- "renesas,rcar_sound-gen2" if generation2 (or RZ/G1)
- "renesas,rcar_sound-gen3" if generation3 (or RZ/G2)
- Examples with soctypes are:
- - "renesas,rcar_sound-r8a7742" (RZ/G1H)
- - "renesas,rcar_sound-r8a7743" (RZ/G1M)
- - "renesas,rcar_sound-r8a7744" (RZ/G1N)
- - "renesas,rcar_sound-r8a7745" (RZ/G1E)
- - "renesas,rcar_sound-r8a77470" (RZ/G1C)
- - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
- - "renesas,rcar_sound-r8a774b1" (RZ/G2N)
- - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
- - "renesas,rcar_sound-r8a774e1" (RZ/G2H)
- - "renesas,rcar_sound-r8a7778" (R-Car M1A)
- - "renesas,rcar_sound-r8a7779" (R-Car H1)
- - "renesas,rcar_sound-r8a7790" (R-Car H2)
- - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
- - "renesas,rcar_sound-r8a7793" (R-Car M2-N)
- - "renesas,rcar_sound-r8a7794" (R-Car E2)
- - "renesas,rcar_sound-r8a7795" (R-Car H3)
- - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
- - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
- - "renesas,rcar_sound-r8a77990" (R-Car E3)
- - "renesas,rcar_sound-r8a77995" (R-Car D3)
-- reg : Should contain the register physical address.
- required register is
- SRU/ADG/SSI if generation1
- SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
- Select extended AUDIO-DMAC-periperi address if SoC has it,
- otherwise select normal AUDIO-DMAC-periperi address.
-- reg-names : Should contain the register names.
- scu/adg/ssi if generation1
- scu/adg/ssiu/ssi/audmapp if generation2/generation3
-- rcar_sound,ssi : Should contain SSI feature.
- The number of SSI subnode should be same as HW.
- see below for detail.
-- rcar_sound,ssiu : Should contain SSIU feature.
- The number of SSIU subnode should be same as HW.
- see below for detail.
-- rcar_sound,src : Should contain SRC feature.
- The number of SRC subnode should be same as HW.
- see below for detail.
-- rcar_sound,ctu : Should contain CTU feature.
- The number of CTU subnode should be same as HW.
- see below for detail.
-- rcar_sound,mix : Should contain MIX feature.
- The number of MIX subnode should be same as HW.
- see below for detail.
-- rcar_sound,dvc : Should contain DVC feature.
- The number of DVC subnode should be same as HW.
- see below for detail.
-- rcar_sound,dai : DAI contents.
- The number of DAI subnode should be same as HW.
- see below for detail.
-- #sound-dai-cells : it must be 0 if your system is using single DAI
- it must be 1 if your system is using multi DAI
-- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
-- clock-names : List of necessary clock names.
- "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X",
- "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i"
-
-Optional properties:
-- #clock-cells : it must be 0 if your system has audio_clkout
- it must be 1 if your system has audio_clkout0/1/2/3
-- clock-frequency : for all audio_clkout0/1/2/3
-- clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn
- is asynchronizes with lr-clock.
-- resets : References to SSI resets.
-- reset-names : List of valid reset names.
- "ssi-all", "ssi.X"
-
-SSI subnode properties:
-- interrupts : Should contain SSI interrupt for PIO transfer
-- shared-pin : if shared clock pin
-- pio-transfer : use PIO transfer mode
-- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case
-- dma : Should contain Audio DMAC entry
-- dma-names : SSI case "rx" (=playback), "tx" (=capture)
- Deprecated: see SSIU subnode properties
- SSIU case "rxu" (=playback), "txu" (=capture)
-
-SSIU subnode properties:
-- dma : Should contain Audio DMAC entry
-- dma-names : "rx" (=playback), "tx" (=capture)
-
-SRC subnode properties:
-- dma : Should contain Audio DMAC entry
-- dma-names : "rx" (=playback), "tx" (=capture)
-
-DVC subnode properties:
-- dma : Should contain Audio DMAC entry
-- dma-names : "tx" (=playback/capture)
-
-DAI subnode properties:
-- playback : list of playback modules
-- capture : list of capture modules
-
-
-=============================================
-Example:
-=============================================
-
-rcar_sound: sound@ec500000 {
- #sound-dai-cells = <1>;
- compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x1280>, /* SSI */
- <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
- reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
-
- clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
- <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
- <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
- <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
- <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
- <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
- <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
- <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
- <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
- clock-names = "ssi-all",
- "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
- "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
- "src.9", "src.8", "src.7", "src.6", "src.5",
- "src.4", "src.3", "src.2", "src.1", "src.0",
- "dvc.0", "dvc.1",
- "clk_a", "clk_b", "clk_c", "clk_i";
-
- rcar_sound,dvc {
- dvc0: dvc-0 {
- dmas = <&audma0 0xbc>;
- dma-names = "tx";
- };
- dvc1: dvc-1 {
- dmas = <&audma0 0xbe>;
- dma-names = "tx";
- };
- };
-
- rcar_sound,mix {
- mix0: mix-0 { };
- mix1: mix-1 { };
- };
-
- rcar_sound,ctu {
- ctu00: ctu-0 { };
- ctu01: ctu-1 { };
- ctu02: ctu-2 { };
- ctu03: ctu-3 { };
- ctu10: ctu-4 { };
- ctu11: ctu-5 { };
- ctu12: ctu-6 { };
- ctu13: ctu-7 { };
- };
-
- rcar_sound,src {
- src0: src-0 {
- interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x85>, <&audma1 0x9a>;
- dma-names = "rx", "tx";
- };
- src1: src-1 {
- interrupts = <0 353 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x87>, <&audma1 0x9c>;
- dma-names = "rx", "tx";
- };
- src2: src-2 {
- interrupts = <0 354 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x89>, <&audma1 0x9e>;
- dma-names = "rx", "tx";
- };
- src3: src-3 {
- interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x8b>, <&audma1 0xa0>;
- dma-names = "rx", "tx";
- };
- src4: src-4 {
- interrupts = <0 356 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x8d>, <&audma1 0xb0>;
- dma-names = "rx", "tx";
- };
- src5: src-5 {
- interrupts = <0 357 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x8f>, <&audma1 0xb2>;
- dma-names = "rx", "tx";
- };
- src6: src-6 {
- interrupts = <0 358 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x91>, <&audma1 0xb4>;
- dma-names = "rx", "tx";
- };
- src7: src-7 {
- interrupts = <0 359 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x93>, <&audma1 0xb6>;
- dma-names = "rx", "tx";
- };
- src8: src-8 {
- interrupts = <0 360 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x95>, <&audma1 0xb8>;
- dma-names = "rx", "tx";
- };
- src9: src-9 {
- interrupts = <0 361 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x97>, <&audma1 0xba>;
- dma-names = "rx", "tx";
- };
- };
-
- rcar_sound,ssiu {
- ssiu00: ssiu-0 {
- dmas = <&audma0 0x15>, <&audma1 0x16>;
- dma-names = "rx", "tx";
- };
- ssiu01: ssiu-1 {
- dmas = <&audma0 0x35>, <&audma1 0x36>;
- dma-names = "rx", "tx";
- };
-
- ...
-
- ssiu95: ssiu-49 {
- dmas = <&audma0 0xA5>, <&audma1 0xA6>;
- dma-names = "rx", "tx";
- };
- ssiu96: ssiu-50 {
- dmas = <&audma0 0xA7>, <&audma1 0xA8>;
- dma-names = "rx", "tx";
- };
- ssiu97: ssiu-51 {
- dmas = <&audma0 0xA9>, <&audma1 0xAA>;
- dma-names = "rx", "tx";
- };
- };
-
- rcar_sound,ssi {
- ssi0: ssi-0 {
- interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x01>, <&audma1 0x02>;
- dma-names = "rx", "tx";
- };
- ssi1: ssi-1 {
- interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x03>, <&audma1 0x04>;
- dma-names = "rx", "tx";
- };
-
- ...
-
- ssi8: ssi-8 {
- interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x11>, <&audma1 0x12>;
- dma-names = "rx", "tx";
- };
- ssi9: ssi-9 {
- interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&audma0 0x13>, <&audma1 0x14>;
- dma-names = "rx", "tx";
- };
- };
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi5 &src5>;
- capture = <&ssi6>;
- };
- dai1 {
- playback = <&ssi3>;
- };
- dai2 {
- capture = <&ssi4>;
- };
- dai3 {
- playback = <&ssi7>;
- };
- dai4 {
- capture = <&ssi8>;
- };
- };
-};
-
-=============================================
-Example: simple sound card
-=============================================
-
- rsnd_ak4643: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&ak4643>;
- clocks = <&audio_clock>;
- };
- };
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &src2 &dvc0>;
- capture = <&ssi1 &src3 &dvc1>;
- };
- };
-};
-
-&ssi1 {
- shared-pin;
-};
-
-=============================================
-Example: simple sound card for Asynchronous mode
-=============================================
-
-sound {
- compatible = "simple-scu-audio-card";
- ...
- /*
- * SRC Asynchronous mode setting
- * Playback:
- * All input data will be converted to 48kHz
- * Capture:
- * Inputed 48kHz data will be converted to
- * system specified Hz
- */
- simple-audio-card,convert-rate = <48000>;
- ...
- simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
- simple-audio-card,codec {
- ...
- };
-};
-
-=============================================
-Example: simple sound card for channel convert
-=============================================
-
-sound {
- compatible = "simple-scu-audio-card";
- ...
- /*
- * CTU setting
- * All input data will be converted to 2ch
- * as output data
- */
- simple-audio-card,convert-channels = <2>;
- ...
- simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- };
- simple-audio-card,codec {
- ...
- };
-};
-
-=============================================
-Example: simple sound card for MIXer
-=============================================
-
-sound {
- compatible = "simple-scu-audio-card";
- ...
- simple-audio-card,cpu@0 {
- sound-dai = <&rcar_sound 0>;
- };
- simple-audio-card,cpu@1 {
- sound-dai = <&rcar_sound 1>;
- };
- simple-audio-card,codec {
- ...
- };
-};
-
-&rcar_sound {
- ...
- rcar_sound,dai {
- dai0 {
- playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
- };
- dai1 {
- playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
- };
- };
-};
-
-=============================================
-Example: simple sound card for TDM
-=============================================
-
-rsnd_tdm: sound {
- compatible = "simple-audio-card";
-
- simple-audio-card,format = "left_j";
- simple-audio-card,bitclock-master = <&sndcodec>;
- simple-audio-card,frame-master = <&sndcodec>;
-
- sndcpu: simple-audio-card,cpu {
- sound-dai = <&rcar_sound>;
- dai-tdm-slot-num = <6>;
- };
-
- sndcodec: simple-audio-card,codec {
- sound-dai = <&xxx>;
- };
-};
-
-=============================================
-Example: simple sound card for TDM Split
-=============================================
-
-sound_card: sound {
- compatible = "audio-graph-scu-card";
- prefix = "xxxx";
- routing = "xxxx Playback", "DAI0 Playback",
- "xxxx Playback", "DAI1 Playback",
- "xxxx Playback", "DAI2 Playback",
- "xxxx Playback", "DAI3 Playback";
- convert-channels = <8>; /* TDM Split */
-
- dais = <&rsnd_port0 /* playback ch1/ch2 */
- &rsnd_port1 /* playback ch3/ch4 */
- &rsnd_port2 /* playback ch5/ch6 */
- &rsnd_port3 /* playback ch7/ch8 */
- >;
-};
-
-audio-codec {
- ...
- port {
- codec_0: endpoint@1 {
- remote-endpoint = <&rsnd_ep0>;
- };
- codec_1: endpoint@2 {
- remote-endpoint = <&rsnd_ep1>;
- };
- codec_2: endpoint@3 {
- remote-endpoint = <&rsnd_ep2>;
- };
- codec_3: endpoint@4 {
- remote-endpoint = <&rsnd_ep3>;
- };
- };
-};
-
-&rcar_sound {
- ...
- ports {
- rsnd_port0: port@0 {
- rsnd_ep0: endpoint {
- remote-endpoint = <&codec_0>;
- ...
- playback = <&ssiu30 &ssi3>;
- };
- };
- rsnd_port1: port@1 {
- rsnd_ep1: endpoint {
- remote-endpoint = <&codec_1>;
- ...
- playback = <&ssiu31 &ssi3>;
- };
- };
- rsnd_port2: port@2 {
- rsnd_ep2: endpoint {
- remote-endpoint = <&codec_2>;
- ...
- playback = <&ssiu32 &ssi3>;
- };
- };
- rsnd_port3: port@3 {
- rsnd_ep3: endpoint {
- remote-endpoint = <&codec_3>;
- ...
- playback = <&ssiu33 &ssi3>;
- };
- };
- };
-};
-
-=============================================
-Example: simple sound card for Multi channel
-=============================================
-
-&rcar_sound {
- pinctrl-0 = <&sound_pins &sound_clk_pins>;
- pinctrl-names = "default";
-
- /* Single DAI */
- #sound-dai-cells = <0>;
-
-
- rcar_sound,dai {
- dai0 {
- playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
new file mode 100644
index 000000000000..ae41370f952c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -0,0 +1,450 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/renesas,rsnd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas R-Car Sound Driver Device Tree Bindings
+
+maintainers:
+ - Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+
+properties:
+
+ compatible:
+ oneOf:
+ # for Gen1 SoC
+ - items:
+ - enum:
+ - renesas,rcar_sound-r8a7778 # R-Car M1A
+ - renesas,rcar_sound-r8a7779 # R-Car H1
+ - enum:
+ - renesas,rcar_sound-gen1
+ # for Gen2 SoC
+ - items:
+ - enum:
+ - renesas,rcar_sound-r8a7742 # RZ/G1H
+ - renesas,rcar_sound-r8a7743 # RZ/G1M
+ - renesas,rcar_sound-r8a7744 # RZ/G1N
+ - renesas,rcar_sound-r8a7745 # RZ/G1E
+ - renesas,rcar_sound-r8a77470 # RZ/G1C
+ - renesas,rcar_sound-r8a7790 # R-Car H2
+ - renesas,rcar_sound-r8a7791 # R-Car M2-W
+ - renesas,rcar_sound-r8a7793 # R-Car M2-N
+ - renesas,rcar_sound-r8a7794 # R-Car E2
+ - enum:
+ - renesas,rcar_sound-gen2
+ # for Gen3 SoC
+ - items:
+ - enum:
+ - renesas,rcar_sound-r8a774a1 # RZ/G2M
+ - renesas,rcar_sound-r8a774b1 # RZ/G2N
+ - renesas,rcar_sound-r8a774c0 # RZ/G2E
+ - renesas,rcar_sound-r8a774e1 # RZ/G2H
+ - renesas,rcar_sound-r8a7795 # R-Car H3
+ - renesas,rcar_sound-r8a7796 # R-Car M3-W
+ - renesas,rcar_sound-r8a77965 # R-Car M3-N
+ - renesas,rcar_sound-r8a77990 # R-Car E3
+ - renesas,rcar_sound-r8a77995 # R-Car D3
+ - enum:
+ - renesas,rcar_sound-gen3
+ # for Generic
+ - items:
+ - enum:
+ - renesas,rcar_sound-gen1
+ - renesas,rcar_sound-gen2
+ - renesas,rcar_sound-gen3
+
+ reg:
+ minItems: 1
+ maxItems: 5
+
+ reg-names:
+ minItems: 1
+ maxItems: 5
+
+ "#sound-dai-cells":
+ description: |
+ it must be 0 if your system is using single DAI
+ it must be 1 if your system is using multi DAIs
+ enum: [0, 1]
+
+ "#clock-cells":
+ description: |
+ it must be 0 if your system has audio_clkout
+ it must be 1 if your system has audio_clkout0/1/2/3
+ enum: [0, 1]
+
+ clock-frequency:
+ description: for audio_clkout0/1/2/3
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ clkout-lr-asynchronous:
+ description: audio_clkoutn is asynchronizes with lr-clock.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ power-domains: true
+
+ resets:
+ maxItems: 11
+
+ reset-names:
+ maxItems: 11
+
+ clocks:
+ description: References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
+ minItems: 1
+ maxItems: 31
+
+ clock-names:
+ description: List of necessary clock names.
+ minItems: 1
+ maxItems: 31
+ items:
+ oneOf:
+ - const: ssi-all
+ - pattern: '^ssi\.[0-9]$'
+ - pattern: '^src\.[0-9]$'
+ - pattern: '^mix\.[0-1]$'
+ - pattern: '^ctu\.[0-1]$'
+ - pattern: '^dvc\.[0-1]$'
+ - pattern: '^clk_(a|b|c|i)$'
+
+ port:
+ description: OF-Graph subnode
+ $ref: "audio-graph-card.yaml#/properties/port"
+
+ ports:
+ description: multi OF-Graph subnode
+ $ref: "audio-graph-card.yaml#/properties/ports"
+
+# use patternProperties to avoid naming "xxx,yyy" issue
+patternProperties:
+ "^rcar_sound,dvc$":
+ description: DVC subnode.
+ type: object
+ patternProperties:
+ "^dvc-[0-1]$":
+ type: object
+ properties:
+ dmas:
+ maxItems: 1
+ dma-names:
+ const: "tx"
+ required:
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ "^rcar_sound,mix$":
+ description: MIX subnode.
+ type: object
+ patternProperties:
+ "^mix-[0-1]$":
+ type: object
+ # no properties
+ additionalProperties: false
+
+ "^rcar_sound,ctu$":
+ description: CTU subnode.
+ type: object
+ patternProperties:
+ "^ctu-[0-7]$":
+ type: object
+ # no properties
+ additionalProperties: false
+
+ "^rcar_sound,src$":
+ description: SRC subnode.
+ type: object
+ patternProperties:
+ "^src-[0-9]$":
+ type: object
+ properties:
+ interrupts:
+ maxItems: 1
+ dmas:
+ maxItems: 2
+ dma-names:
+ allOf:
+ - items:
+ enum:
+ - tx
+ - rx
+ required:
+ - interrupts
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ "^rcar_sound,ssiu$":
+ description: SSIU subnode.
+ type: object
+ patternProperties:
+ "^ssiu-[0-9]+$":
+ type: object
+ properties:
+ dmas:
+ maxItems: 2
+ dma-names:
+ allOf:
+ - items:
+ enum:
+ - tx
+ - rx
+ required:
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ "^rcar_sound,ssi$":
+ description: SSI subnode.
+ type: object
+ patternProperties:
+ "^ssi-[0-9]$":
+ type: object
+ properties:
+ interrupts:
+ maxItems: 1
+ dmas:
+ minItems: 2
+ maxItems: 4
+ dma-names:
+ allOf:
+ - items:
+ enum:
+ - tx
+ - rx
+ - txu # if no ssiu node
+ - rxu # if no ssiu node
+
+ shared-pin:
+ description: shared clock pin
+ $ref: /schemas/types.yaml#/definitions/flag
+ pio-transfer:
+ description: PIO transfer mode
+ $ref: /schemas/types.yaml#/definitions/flag
+ no-busif:
+ description: BUSIF is not used when [mem -> SSI] via DMA case
+ $ref: /schemas/types.yaml#/definitions/flag
+ required:
+ - interrupts
+ - dmas
+ - dma-names
+ additionalProperties: false
+
+ # For DAI base
+ "^rcar_sound,dai$":
+ description: DAI subnode.
+ type: object
+ patternProperties:
+ "^dai([0-9]+)?$":
+ type: object
+ properties:
+ playback:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ capture:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ anyOf:
+ - required:
+ - playback
+ - required:
+ - capture
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - "#sound-dai-cells"
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,rcar_sound-gen1
+ then:
+ properties:
+ reg:
+ maxItems: 3
+ reg-names:
+ maxItems: 3
+ items:
+ enum:
+ - scu
+ - ssi
+ - adg
+ else:
+ properties:
+ reg:
+ maxItems: 5
+ reg-names:
+ maxItems: 5
+ items:
+ enum:
+ - scu
+ - adg
+ - ssiu
+ - ssi
+ - audmapp
+
+additionalProperties: false
+
+examples:
+ - |
+ rcar_sound: sound@ec500000 {
+ #sound-dai-cells = <1>;
+ compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2";
+ reg = <0xec500000 0x1000>, /* SCU */
+ <0xec5a0000 0x100>, /* ADG */
+ <0xec540000 0x1000>, /* SSIU */
+ <0xec541000 0x1280>, /* SSI */
+ <0xec740000 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&mstp10_clks 1005>, /* SSI-ALL */
+ <&mstp10_clks 1006>, <&mstp10_clks 1007>, /* SSI9, SSI8 */
+ <&mstp10_clks 1008>, <&mstp10_clks 1009>, /* SSI7, SSI6 */
+ <&mstp10_clks 1010>, <&mstp10_clks 1011>, /* SSI5, SSI4 */
+ <&mstp10_clks 1012>, <&mstp10_clks 1013>, /* SSI3, SSI2 */
+ <&mstp10_clks 1014>, <&mstp10_clks 1015>, /* SSI1, SSI0 */
+ <&mstp10_clks 1022>, <&mstp10_clks 1023>, /* SRC9, SRC8 */
+ <&mstp10_clks 1024>, <&mstp10_clks 1025>, /* SRC7, SRC6 */
+ <&mstp10_clks 1026>, <&mstp10_clks 1027>, /* SRC5, SRC4 */
+ <&mstp10_clks 1028>, <&mstp10_clks 1029>, /* SRC3, SRC2 */
+ <&mstp10_clks 1030>, <&mstp10_clks 1031>, /* SRC1, SRC0 */
+ <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* MIX1, MIX0 */
+ <&mstp10_clks 1020>, <&mstp10_clks 1021>, /* CTU1, CTU0 */
+ <&mstp10_clks 1019>, <&mstp10_clks 1018>, /* DVC0, DVC1 */
+ <&audio_clk_a>, <&audio_clk_b>, /* CLKA, CLKB */
+ <&audio_clk_c>, <&audio_clk_i>; /* CLKC, CLKI */
+
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8",
+ "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4",
+ "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8",
+ "src.7", "src.6",
+ "src.5", "src.4",
+ "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b",
+ "clk_c", "clk_i";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma0 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma0 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ status = "disabled";
+ };
+ src1: src-1 {
+ interrupts = <0 353 0>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ /* skip after src-2 */
+ };
+
+ rcar_sound,ssiu {
+ ssiu00: ssiu-0 {
+ dmas = <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx";
+ };
+ ssiu01: ssiu-1 {
+ dmas = <&audma0 0x35>, <&audma1 0x36>;
+ dma-names = "rx", "tx";
+ };
+ /* skip after ssiu-2 */
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <0 370 1>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>;
+ dma-names = "rx", "tx";
+ };
+ ssi1: ssi-1 {
+ interrupts = <0 371 1>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>;
+ dma-names = "rx", "tx";
+ };
+ /* skip other ssi-2 */
+ };
+
+ /* DAI base */
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi5 &src5>;
+ capture = <&ssi6>;
+ };
+ dai1 {
+ playback = <&ssi3>;
+ };
+ dai2 {
+ capture = <&ssi4>;
+ };
+ dai3 {
+ playback = <&ssi7>;
+ };
+ dai4 {
+ capture = <&ssi8>;
+ };
+ };
+
+ /* assume audio-graph */
+ port {
+ rsnd_endpoint: endpoint {
+ remote-endpoint = <&codec_endpoint>;
+
+ dai-format = "left_j";
+ bitclock-master = <&rsnd_endpoint0>;
+ frame-master = <&rsnd_endpoint0>;
+
+ playback = <&ssi0 &src0 &dvc0>;
+ capture = <&ssi1 &src1 &dvc1>;
+ };
+ };
+ };
+
+
+ /* assume audio-graph */
+ codec {
+ port {
+ codec_endpoint: endpoint {
+ remote-endpoint = <&rsnd_endpoint>;
+ };
+ };
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support
2020-11-05 6:04 ` Kuninori Morimoto
@ 2020-11-05 6:05 ` Kuninori Morimoto
-1 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-11-05 6:05 UTC (permalink / raw
To: Rob Herring, Mark Brown; +Cc: alsa-devel, devicetree, Sameer Pujar
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Document R-Car M3-W+ (R8A77961) SoC bindings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index ae41370f952c..51f4dcaa970d 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -43,6 +43,7 @@ properties:
- renesas,rcar_sound-r8a774e1 # RZ/G2H
- renesas,rcar_sound-r8a7795 # R-Car H3
- renesas,rcar_sound-r8a7796 # R-Car M3-W
+ - renesas,rcar_sound-r8a77961 # R-Car M3-W+
- renesas,rcar_sound-r8a77965 # R-Car M3-N
- renesas,rcar_sound-r8a77990 # R-Car E3
- renesas,rcar_sound-r8a77995 # R-Car D3
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support
@ 2020-11-05 6:05 ` Kuninori Morimoto
0 siblings, 0 replies; 12+ messages in thread
From: Kuninori Morimoto @ 2020-11-05 6:05 UTC (permalink / raw
To: Rob Herring, Mark Brown; +Cc: devicetree, alsa-devel, Sameer Pujar
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Document R-Car M3-W+ (R8A77961) SoC bindings.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index ae41370f952c..51f4dcaa970d 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -43,6 +43,7 @@ properties:
- renesas,rcar_sound-r8a774e1 # RZ/G2H
- renesas,rcar_sound-r8a7795 # R-Car H3
- renesas,rcar_sound-r8a7796 # R-Car M3-W
+ - renesas,rcar_sound-r8a77961 # R-Car M3-W+
- renesas,rcar_sound-r8a77965 # R-Car M3-N
- renesas,rcar_sound-r8a77990 # R-Car E3
- renesas,rcar_sound-r8a77995 # R-Car D3
--
2.25.1
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v6 2/3] dt-bindings: ASoC: renesas, rsnd: switch to yaml base Documentation
2020-11-05 6:05 ` [PATCH v6 2/3] dt-bindings: ASoC: renesas, rsnd: " Kuninori Morimoto
@ 2020-11-05 18:48 ` Rob Herring
-1 siblings, 0 replies; 12+ messages in thread
From: Rob Herring @ 2020-11-05 18:48 UTC (permalink / raw
To: Kuninori Morimoto
Cc: Rob Herring, devicetree, alsa-devel, Sameer Pujar, Mark Brown
On Thu, 05 Nov 2020 15:05:10 +0900, Kuninori Morimoto wrote:
> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> This patch switches from .txt base to .yaml base Document.
> It is still keeping detail explanations at .txt
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> .../bindings/sound/renesas,rsnd.txt | 520 ------------------
> .../bindings/sound/renesas,rsnd.yaml | 450 +++++++++++++++
> 2 files changed, 450 insertions(+), 520 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 2/3] dt-bindings: ASoC: renesas, rsnd: switch to yaml base Documentation
@ 2020-11-05 18:48 ` Rob Herring
0 siblings, 0 replies; 12+ messages in thread
From: Rob Herring @ 2020-11-05 18:48 UTC (permalink / raw
To: Kuninori Morimoto
Cc: devicetree, alsa-devel, Rob Herring, Mark Brown, Sameer Pujar
On Thu, 05 Nov 2020 15:05:10 +0900, Kuninori Morimoto wrote:
> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> This patch switches from .txt base to .yaml base Document.
> It is still keeping detail explanations at .txt
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> ---
> .../bindings/sound/renesas,rsnd.txt | 520 ------------------
> .../bindings/sound/renesas,rsnd.yaml | 450 +++++++++++++++
> 2 files changed, 450 insertions(+), 520 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation
2020-11-05 6:04 ` Kuninori Morimoto
@ 2020-11-06 11:54 ` Mark Brown
-1 siblings, 0 replies; 12+ messages in thread
From: Mark Brown @ 2020-11-06 11:54 UTC (permalink / raw
To: Rob Herring, Kuninori Morimoto; +Cc: alsa-devel, devicetree, Sameer Pujar
On 05 Nov 2020 15:04:25 +0900, Kuninori Morimoto wrote:
> Cc: Sameer
>
> These are v6 of switch to yaml base Documentation for
> audio-graph-card and renesas,rsnd which uses audio-graph-card.
>
> v5 -> v6
> - add Acked-by/Reviewed-by on each patch
> - remove "audio-graph-card,xxx" property
> - remove un-needed if "ok"
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/3] ASoC: audio-graph-card: switch to yaml base Documentation
commit: 97198614f6c3b019299b1189106478ffb58481c9
[2/3] ASoC: renesas, rsnd: switch to yaml base Documentation
commit: 2d8fc973646c8ae87b668e30730becc8b1a57a06
[3/3] ASoC: renesas,rsnd: Add r8a77961 support
commit: 8d96ec9ba9e7bd606d5d0fead9f91f0c5a3366a0
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH v6 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation
@ 2020-11-06 11:54 ` Mark Brown
0 siblings, 0 replies; 12+ messages in thread
From: Mark Brown @ 2020-11-06 11:54 UTC (permalink / raw
To: Rob Herring, Kuninori Morimoto; +Cc: devicetree, alsa-devel, Sameer Pujar
On 05 Nov 2020 15:04:25 +0900, Kuninori Morimoto wrote:
> Cc: Sameer
>
> These are v6 of switch to yaml base Documentation for
> audio-graph-card and renesas,rsnd which uses audio-graph-card.
>
> v5 -> v6
> - add Acked-by/Reviewed-by on each patch
> - remove "audio-graph-card,xxx" property
> - remove un-needed if "ok"
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/3] ASoC: audio-graph-card: switch to yaml base Documentation
commit: 97198614f6c3b019299b1189106478ffb58481c9
[2/3] ASoC: renesas, rsnd: switch to yaml base Documentation
commit: 2d8fc973646c8ae87b668e30730becc8b1a57a06
[3/3] ASoC: renesas,rsnd: Add r8a77961 support
commit: 8d96ec9ba9e7bd606d5d0fead9f91f0c5a3366a0
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2020-11-06 11:55 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-05 6:04 [PATCH v6 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation Kuninori Morimoto
2020-11-05 6:04 ` Kuninori Morimoto
2020-11-05 6:04 ` [PATCH v6 1/3] dt-bindings: ASoC: " Kuninori Morimoto
2020-11-05 6:04 ` Kuninori Morimoto
2020-11-05 6:05 ` [PATCH v6 2/3] dt-bindings: ASoC: renesas,rsnd: " Kuninori Morimoto
2020-11-05 6:05 ` [PATCH v6 2/3] dt-bindings: ASoC: renesas, rsnd: " Kuninori Morimoto
2020-11-05 18:48 ` Rob Herring
2020-11-05 18:48 ` Rob Herring
2020-11-05 6:05 ` [PATCH v6 3/3] dt-bindings: ASoC: renesas,rsnd: Add r8a77961 support Kuninori Morimoto
2020-11-05 6:05 ` Kuninori Morimoto
2020-11-06 11:54 ` [PATCH v6 0/3] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation Mark Brown
2020-11-06 11:54 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.